REMOTEACCESS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for REMOTEACCESS-MIB.
805
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
805 total| Object Name |
|---|
ppp OBJECT IDENTIFIER .1.3.6.1.2.1.10.23 |
tftp OBJECT IDENTIFIER .1.3.6.1.2.1.16.19 |
tftpFileThe file name to be LOADED from or STORED on the TFTP server,
when a download is next requested via this MIB. This value is
set to the zero length string when no file name has been specified.rw DisplayString .1.3.6.1.2.1.16.19.6 |
tftpServerIPThe IP address of the TFTP server that contains the
image to LOAD or STORE when a LOAD or STORE is next requested
via this MIB. This value is set to `0.0.0.0' when no IP address
has been specified.rw IpAddress .1.3.6.1.2.1.16.19.7 |
tftpActionWhen this object is set to LOAD (2) or STORE (3), the
device will discontinue its normal operation and begin
loading or storing of the image specified by probeDownloadFile
using the TFTP protocol. If LOAD(2) is specified, the new image
is copied from the TFTP Server to the unit. If STORE(3)is specified
the image is written to the TFTP Server.rw Enumeration .1.3.6.1.2.1.16.19.8 |
tftpStatusThe status of the last download procedure, if any. This
object will have a value of StatusUnknown(2) if no LOAD or
STORE process has been performed.ro Enumeration .1.3.6.1.2.1.16.19.9 |
sonix OBJECT IDENTIFIER .1.3.6.1.4.1.559 |
RMON-MIB Unknown .1.3.6.1.4.1.559 |
isdnTestCallEventThe isdnTestCallEvent Trap is sent whenever an ISDN test autocall
is made, and is unsuccessful. TRAP-TYPE .1.3.6.1.4.1.559.0.1 |
isdnLinkDownEventThe isdnLinkEvent is sent whenever an ISDN Link has been disconnected.
This should be used in conjunction with the associated MIBII object. TRAP-TYPE .1.3.6.1.4.1.559.0.2 |
isdnLinkUpEventThe isdnLinkEvent is sent whenever an ISDN Link has been established
and dataflow is granted. This should be used in conjunction with
the associated MIBII object. TRAP-TYPE .1.3.6.1.4.1.559.0.3 |
q931FailCauseEventThe q931FailCauseEvent is sent whenever a Q931 ISDN call is attempted
but fails due to isdnFailCauseCode reason TRAP-TYPE .1.3.6.1.4.1.559.0.6 |
dass2FailCauseEventThe dassFailCauseEvent is sent whenever a DASS2 ISDN call is attempted
but fails due to isdnFailCauseCode reason TRAP-TYPE .1.3.6.1.4.1.559.0.7 |
briFailCauseEventThe briFailCauseEvent is sent whenever a BRI ISDN call is attempted
but fails due to isdnFailCauseCode reason TRAP-TYPE .1.3.6.1.4.1.559.0.8 |
radiusTrapEventThe RadiusTrapEvent is sent whenever a user attempts to
log into a unit and RADIUS authentication is enabled. The
RadiusReply indicates level of authentication granted to
the user (if any). The RadiusUsername shows the username
entered at the login prompt. TRAP-TYPE .1.3.6.1.4.1.559.0.20 |
loginTrapEventThe LoginTrapEvent is sent whenever a user attempts to
log into a unit and RADIUS authentication fails. The
boolean LoginCode indicates whether the user sucessfully
logged in with the default password. TRAP-TYPE .1.3.6.1.4.1.559.0.21 |
cscmTrapEventThe cscmTrapEvent is sent by the CSCM management system
whenever an event occurs for a unit on the system that
has been setup with trap information and flagged to send
it TRAP-TYPE .1.3.6.1.4.1.559.0.100 |
sonixMibs OBJECT IDENTIFIER .1.3.6.1.4.1.559.1 |
remoteaccessMib OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1 |
variantProduct variant.ro DisplayString .1.3.6.1.4.1.559.1.2.1.1 |
versionProduct version number.ro DisplayString .1.3.6.1.4.1.559.1.2.1.2 |
unitnameThe name of the unit.rw DisplayString .1.3.6.1.4.1.559.1.2.1.3 |
saveSave current configuration to NVRAM.rw Enumeration .1.3.6.1.4.1.559.1.2.1.4 |
standardRestore standard configuration, erasing NVRAM.rw Enumeration .1.3.6.1.4.1.559.1.2.1.5 |
saverequiredHave changes been made which need to be save to NVRAM.ro Enumeration .1.3.6.1.4.1.559.1.2.1.6 |
dateReal-time clock date. (Format dd/mm/yyyy).rw DisplayString .1.3.6.1.4.1.559.1.2.1.7 |
timeReal-time clock time. (Format hh:mm:ss).rw DisplayString .1.3.6.1.4.1.559.1.2.1.8 |
dayoftheweekReal-time clock day.rw Enumeration .1.3.6.1.4.1.559.1.2.1.9 |
managertimeoutThe time after which the manager will timeout
if there is no activity. Set this to 0
for no timeout.rw INTEGER .1.3.6.1.4.1.559.1.2.1.10 |
unitipadThe Network port ip address of the unit.rw IpAddress .1.3.6.1.4.1.559.1.2.1.11 |
unitmacaddressThe MAC address of the unit.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.12 |
defaultalertAlert LED action.rw Enumeration .1.3.6.1.4.1.559.1.2.1.13 |
incallalertIncoming call Alert LED action.rw Enumeration .1.3.6.1.4.1.559.1.2.1.14 |
publiccommunityCommunity for reading MIB entries. This string will
not be returned, but may be set.rw DisplayString (SIZE .1.3.6.1.4.1.559.1.2.1.15 |
privatecommunityCommunity for reading and writing MIB entries.
This string will not be returned, but may be set.rw DisplayString (SIZE .1.3.6.1.4.1.559.1.2.1.16 |
trapaddressThe IP Address of the default management station to
which all traps will be sent.rw IpAddress .1.3.6.1.4.1.559.1.2.1.17 |
trapportThe port on the default management station to which
all traps will be sent.rw INTEGER .1.3.6.1.4.1.559.1.2.1.18 |
lcdManagerLockDefines whether keypad operation is allowed.rw Enumeration .1.3.6.1.4.1.559.1.2.1.19 |
loopControlWhen enabled Loop Control allows a physical loop
to exist without causing broadcast storms by
preventing frames received on one WAN/ISDN port
being retransmitted on other WAN/ISDN ports
(useful when using multiple ISDN circuits).rw Enumeration .1.3.6.1.4.1.559.1.2.1.20 |
novelltimeoutThe time after which Novell session emulation will
timeout if there is no activity. Set this to 0
for no timeout.rw INTEGER .1.3.6.1.4.1.559.1.2.1.21 |
timeSinceRebootTime since last reboot. (Format hh:mm:ss).ro DisplayString .1.3.6.1.4.1.559.1.2.1.22 |
passwdsTableA table of manager passwords. In fact, only one
entry in the table is allowed. SEQUENCE OF PasswdsEntry .1.3.6.1.4.1.559.1.2.1.23 |
passwdsEntryA list of manager passwords. PasswdsEntry .1.3.6.1.4.1.559.1.2.1.23.1 |
passwdsOldThe current manager password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.23.1.1 |
passwdsNewThe new manager password. To change the password,
a new table entry must be added, with both the
old password and the new password in the same
SET. The table will always appear empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.23.1.2 |
ip OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.25 |
iprip OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.25.1 |
ipInRipRequestsThe number of IP RIP datagram requests received.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.1 |
ipInRipResponsesThe number of IP RIP datagram responses received.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.2 |
ipInRipErrorsThe number of IP RIP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.3 |
ipInRipDiscardsThe number of IP RIP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.4 |
ipOutRipRequestsThe number of IP RIP datagram requests transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.5 |
ipOutRipResponsesThe number of IP RIP datagram responses transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.6 |
ipOutRipUpdatesThe number of IP RIP datagrams transmitted due to
the detection of a network configuration change.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.7 |
ipOutRipErrorsThe number of IP RIP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.8 |
ipOutRipDiscardsThe number of IP RIP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.25.1.9 |
ipRoutingProtocolThe IP routing protocol used.rw Enumeration .1.3.6.1.4.1.559.1.2.1.25.1.10 |
ipRipLearningWhen enabled the RIP Table will be updated.
This is only applicable to dial-up links.rw Enumeration .1.3.6.1.4.1.559.1.2.1.25.1.11 |
ipRoutingAdvertiseThe interface that all rips are transmitted on.rw Enumeration .1.3.6.1.4.1.559.1.2.1.25.1.12 |
ipRouteTableCopyThis entity's IP Routing table. SEQUENCE OF IpRouteEntryCopy .1.3.6.1.4.1.559.1.2.1.25.2 |
ipRouteEntryCopyA route to a particular destination. IpRouteEntryCopy .1.3.6.1.4.1.559.1.2.1.25.2.1 |
ipRouteDestCopyThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered an
unnumbered route. Unnumbered routes are differentiated
by their Destination Route Name entries.
Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.rw IpAddress .1.3.6.1.4.1.559.1.2.1.25.2.1.1 |
ipRouteIfIndexCopyThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.ro INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.2 |
ipRouteMetric1CopyThe primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.3 |
ipRouteMetric2CopyAn alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.4 |
ipRouteMetric3CopyAn alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.5 |
ipRouteMetric4CopyAn alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.6 |
ipRouteNextHopCopyThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.)rw IpAddress .1.3.6.1.4.1.559.1.2.1.25.2.1.7 |
ipRouteTypeCopyThe type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object.rw Enumeration .1.3.6.1.4.1.559.1.2.1.25.2.1.8 |
ipRouteProtoCopyThe routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.ro Enumeration .1.3.6.1.4.1.559.1.2.1.25.2.1.9 |
ipRouteAgeCopyThe number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.10 |
ipRouteMaskCopyIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by
determining whether the value of the correspondent
ipRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.rw IpAddress .1.3.6.1.4.1.559.1.2.1.25.2.1.11 |
ipRouteMetric5CopyAn alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER .1.3.6.1.4.1.559.1.2.1.25.2.1.12 |
ipRouteInfoCopyA reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipRouteProto value. If
this information is not present, its value should
be set to the OBJECT IDENTIFIER { 0 0 }, which is
a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.25.2.1.13 |
ipRouteNextHopNameA unique name for the next hop for an unnumbered
route. If the IP address of the next hop is
0.0.0.0 it is taken to be the default route if
this string is NULL, or an unnumbered link to the
named interface if not.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.25.2.1.14 |
ipRouteAdvertiseWhether or not this route should be advertisedrw Enumeration .1.3.6.1.4.1.559.1.2.1.25.2.1.15 |
ipx OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26 |
ipxInReceivesThe number of IPX datagrams received on all interfaces
including those received in error.ro Counter .1.3.6.1.4.1.559.1.2.1.26.1 |
ipxInDeliversThe number of IPX datagrams delivered to this management
entity.ro Counter .1.3.6.1.4.1.559.1.2.1.26.2 |
ipxInDiscardsThe number of IPX datagrams discarded due to insufficient
resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.3 |
ipxInUnknownProtocolsThe number of IPX datagrams discardrd due to unknown
or unsupported protocols.ro Counter .1.3.6.1.4.1.559.1.2.1.26.4 |
ipxInHeaderErrorsThe number of IPX datagrams recieved and discarded
due to errors detected in the IPX header.ro Counter .1.3.6.1.4.1.559.1.2.1.26.5 |
ipxForwardDatagramsThe number of received IPX datagrams not addressed to
the IPX Router, which the router will attempt to forward.ro Counter .1.3.6.1.4.1.559.1.2.1.26.6 |
ipxOutRequestsThe number of datagrams supplied to IPX by local user
protocols.ro Counter .1.3.6.1.4.1.559.1.2.1.26.7 |
ipxOutNoRoutesThe number of datagrams discarded because no route
could be found to transmit them to their destination.ro Counter .1.3.6.1.4.1.559.1.2.1.26.8 |
ipxOutDiscardsThe number of IPX datagrams discarded because no
resource could be found to allow transmission.ro Counter .1.3.6.1.4.1.559.1.2.1.26.9 |
ipxForwardingThe indication as to whether this entity is acting
as a Router.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.10 |
ipxrip OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26.11 |
ipxInRipRequestsThe number of IPX RIP datagram requests received.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.1 |
ipxInRipResponsesThe number of IPX RIP datagram responses received.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.2 |
ipxInRipErrorsThe number of IPX RIP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.3 |
ipxInRipTimeoutsThe number of times IPX RIP datagrams have been expected
but have not been received.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.4 |
ipxInRipDiscardsThe number of IPX RIP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.5 |
ipxOutRipRequestsThe number of IPX RIP datagram requests transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.6 |
ipxOutRipResponsesThe number of IPX RIP datagram responses transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.7 |
ipxOutRipUpdatesThe number of IPX RIP datagrams transmitted due to
the detection of a network configuration change.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.8 |
ipxOutRipErrorsThe number of IPX RIP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.9 |
ipxOutRipDiscardsThe number of IPX RIP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.11.10 |
ipxrt OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26.12 |
ipxRoutingTableThe IPX Routing Table. SEQUENCE OF IpxRoutingTableEntry .1.3.6.1.4.1.559.1.2.1.26.12.1 |
ipxRoutingTableEntryInformation about a routing table entry. IpxRoutingTableEntry .1.3.6.1.4.1.559.1.2.1.26.12.1.1 |
ipxRouteTargetThe IPX network number of the destination network.ro OCTET STRING .1.3.6.1.4.1.559.1.2.1.26.12.1.1.1 |
ipxRouteHopCountThe number of hops necessary to reach the destination network.
This count includes the additional count required to
reach the destination network through this route.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.12.1.1.2 |
ipxRouteTicksThe delay in ticks to reach the destination network.
This count includes the additional count required to
reach the destination network through this route.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.12.1.1.3 |
ipxRouteNextHopNetworkThe IPX Network Address of the next route on the path
to the target network.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.26.12.1.1.4 |
ipxRouteNextHopNodeThe IPX Node Address of the next router on the path
to the target network.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.12.1.1.5 |
ipxRouteTypeIdentifies the source of the learnt entry:
remote - from the WAN.
local - from the LAN.
alternate - identifies an entry specifying an alternate,
but less desireable route to a known destintion.
equal - identifies an entry specifying an alternative route
to a known destination.
autocall - from the ISDN Autocall table.
permanent - identifies a permanent entry.
The only valid set request is to make a route permanent.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.12.1.1.6 |
ipxRoutePortThe name of the logical port through which IPX datagrams
will be forwarded towards the destination network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.12.1.1.7 |
ipxRouteLinkTypeThe link protocol of the logical port through which IPX
datagrams will be forwarded towards the destination
network.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.12.1.1.8 |
ipxRouteIpxTypeThe frame type for IPX RIP messages.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.12.1.1.9 |
ipxRouteLinkTicksThe additional count required to reach the destination network through this route.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.12.1.1.10 |
ipxRouteMlinkThe MLINK through which datagrams will be forwarded towards the destination network.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.12.1.1.11 |
ipxRouteModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.26.12.1.1.12 |
ipxsap OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26.13 |
ipxInSapRequestsThe number of IPX SAP datagram updates received.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.1 |
ipxInSapResponsesThe number of IPX SAP datagram queries received.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.2 |
ipxInSapNoServersThe number of IPX datagrams received indicating that
no Servers are available.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.3 |
ipxInSapErrorsThe number of IPX SAP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.4 |
ipxInSapDiscardsThe number of IPX SAP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.5 |
ipxOutSapRequestsThe number of IPX SAP datagram updates transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.6 |
ipxOutSapResponsesThe number of IPX SAP datagram replies transmitted.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.7 |
ipxOutSapErrorsThe number of IPX SAP datagrams discarded due to
some error other than insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.8 |
ipxOutSapDiscardsThe number of IPX SAP datagrams discarded due to
insufficient resources.ro Counter .1.3.6.1.4.1.559.1.2.1.26.13.9 |
ipxsapt OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26.14 |
ipxServicesTableThe IPX Services Table. SEQUENCE OF IpxServicesTableEntry .1.3.6.1.4.1.559.1.2.1.26.14.1 |
ipxServicesTableEntryInformation about a services table entry. IpxServicesTableEntry .1.3.6.1.4.1.559.1.2.1.26.14.1.1 |
ipxServiceNetworkThe IPX network number portion of the IPX Address
of this server.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.26.14.1.1.1 |
ipxServiceNodeThe IPX node number portion of the IPX Address
of this server.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.14.1.1.2 |
ipxServiceSocketThe IPX socket through which this server is advertising.ro INTEGER .1.3.6.1.4.1.559.1.2.1.26.14.1.1.3 |
ipxServiceNameThe name of this server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.14.1.1.4 |
ipxServiceTypeThe type of service offered by this server.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.14.1.1.5 |
ipxServiceHopCountThe number of hops necessary to reach this server. This
count will include the additional count required to
reach the server through this route.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.14.1.1.6 |
ipxServicePortThe name of the logical port through which the server
is reachable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.14.1.1.7 |
ipxServiceNextHopNetworkThe IPX Network Address of the next route on the path
to the target network.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.26.14.1.1.8 |
ipxServiceNextHopNodeThe IPX Node Address of the next router on the path
to the target network.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.14.1.1.9 |
ipxServiceIpxTypeThe frame type for IPX SAP messages.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.14.1.1.10 |
ipxServiceRTTypeIdentifies the source of the learnt entry:
remote - from the WAN.
local - from the LAN.
alternate - identifies an entry specifying an alternate,
but less desireable route to a known destintion.
equal - identifies an entry specifying an alternative route
to a known destination.
autocall - from the ISDN Autocall table.
permanent - identifies a permanent entry.
The only valid set request is to make an entry permanent.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.14.1.1.11 |
ipxServiceLinkTypeThe link protocol of the logical port through which IPX
datagrams will be forwarded towards the destination
network.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.14.1.1.12 |
ipxServiceMlinkThe MLINK through which datagrams will be forwarded towards the destination network.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.14.1.1.13 |
ipxServiceModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.26.14.1.1.14 |
ipxnear OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.26.15 |
ipxNearestThe indication as to whether the Nearest Servers list is
inclusive or exclusive.rw Enumeration .1.3.6.1.4.1.559.1.2.1.26.15.1 |
ipxNearestTableThe IPX Nearest Table. SEQUENCE OF IpxNearestTableEntry .1.3.6.1.4.1.559.1.2.1.26.15.2 |
ipxNearestTableEntryInformation about a services table entry. IpxNearestTableEntry .1.3.6.1.4.1.559.1.2.1.26.15.2.1 |
ipxNearestIndexThe index of this entry.rw INTEGER .1.3.6.1.4.1.559.1.2.1.26.15.2.1.1 |
ipxNearestServerThe IPX servers in the IPX Nearest table.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.26.15.2.1.2 |
ipxNearestModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.26.15.2.1.3 |
pppext OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.27 |
pppExtLcpConfigTableThe PPP Extended LCP Table SEQUENCE OF PppExtLcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.1 |
pppExtLcpConfigTableEntryInformation about a LCP extension table entry. PppExtLcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.1.1 |
pppExtLcpLocalProtocolCompressionLCP Protocol Compressionrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.1 |
pppExtLcpLocalAddressCompressionLCP Address Compressionrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.2 |
pppExtLcpRemoteMRULCP Remote MRUrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.3 |
pppExtLcpRemoteProtocolCompressionLCP Protocol Compressionrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.4 |
pppExtLcpRemoteAddressCompressionLCP Address Compressionrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.5 |
pppExtLcpMinimumRestartPeriodMinimum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.6 |
pppExtLcpMaximumRestartPeriodMaximum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.7 |
pppExtLcpMaximumTerminateRequestsMaximum Terminate Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.8 |
pppExtLcpMaximumConfigRequestsMaximum Configure Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.9 |
pppExtLcpMaximumConfigNaksMaximum Configure Naksrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.10 |
pppExtLcpLocalMRULCP Local MRUrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.11 |
pppExtLcpLocalMagicLCP Local Magic Numberrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.12 |
pppExtLcpRemoteMagicLCP Remote Magic Numberrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.13 |
pppExtLcpLocalMRUEnabledLCP Local MRU Enabledrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.14 |
pppExtLcpRemoteMRUEnabledLCP Remote MRU Enabledrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.15 |
pppExtLcpLocalACCMLCP Local Accmrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.16 |
pppExtLcpRemoteACCMLCP Remote Accmrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.17 |
pppExtLcpLocalACCMEnabledLCP Local Accm Enabledrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.18 |
pppExtLcpRemoteACCMEnabledLCP Remote Accm Enabledrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.19 |
pppExtLcpLocalPAPEnabledLCP Local PAP Enabledrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.20 |
pppExtLcpRemotePAPEnabledLCP Remote PAP Enabledrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.1.1.21 |
pppExtLcpLocalCHAPEnabledLCP Local CHAP Enabledrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.22 |
pppExtLcpRemoteCHAPEnabledLCP Remote CHAP Enabledrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.1.1.23 |
pppEchoConfigTableThe PPP LCP Echo Table SEQUENCE OF PppEchoConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.2 |
pppEchoConfigTableEntryInformation about a LCP Echo table entry. PppEchoConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.2.1 |
pppEchoPeriodLCP Echo Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.2.1.1 |
pppEchoMaxNumberRetransmitsMaximum number LCP Echos sent with reply before
link is closed. Zero disables echos.rw INTEGER .1.3.6.1.4.1.559.1.2.1.27.2.1.2 |
pppIpcpConfigTableThe PPP IPCP Config Table SEQUENCE OF PppIpcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.3 |
pppIpcpConfigTableEntryInformation about a IPCP table entry. PppIpcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.3.1 |
ipcpLocalIPAddressNegotiationIPCP Local IP Address Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.3.1.1 |
ipcpRemoteIPAddressNegotiationIPCP Remote IP Address Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.3.1.2 |
ipcpRemoteCompressionNegotiationIPCP Remote Compression Protocolrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.3.1.3 |
ipcpMinimumRestartPeriodMinimum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.3.1.4 |
ipcpMaximumRestartPeriodMaximum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.3.1.5 |
ipcpMaximumTerminateRequestsMaximum Terminate Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.3.1.6 |
ipcpMaximumConfigRequestsMaximum Configure Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.3.1.7 |
ipcpMaximumConfigNaksMaximum Configure Naksrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.3.1.8 |
ipcpLocalCompressionNegotiationIPCP Local Compression Protocolrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.3.1.9 |
ipcpRfc1172NegotiationIPCP RFC1172 Negotiationrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.3.1.10 |
pppIpxcpConfigTableThe PPP IPXCP Config Table SEQUENCE OF PppIpxcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.4 |
pppIpxcpConfigTableEntryInformation about a IPXCP table entry. PppIpxcpConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.4.1 |
ipxcpLocalNetworkNumberNegotiationIPXCP Local Network Number Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.1 |
ipxcpLocalNodeNumberNegotiationIPXCP Local Node Number Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.2 |
ipxcpLocalRoutingProtocolNegotiationIPXCP Local Routing Protocol Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.3 |
ipxcpLocalRouterNameNegotiationIPXCP Local Router Name Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.4 |
ipxcpRemoteNetworkNumberNegotiationIPXCP Remote Network Number Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.5 |
ipxcpRemoteNodeNumberNegotiationIPXCP Remote Node Number Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.6 |
ipxcpRemoteRoutingProtocolNegotiationIPXCP Remote Routing Protocol Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.7 |
ipxcpRemoteRouterNameNegotiationIPXCP Remote Router Name Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.8 |
ipxcpConfigCompleteNegotiationIPXCP Configure Complete Negotiation Maskrw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.9 |
ipxcpAdminIPXCP Admin Status. Inject OPEN or CLOSE event
into the IPXCP state machine.rw Enumeration .1.3.6.1.4.1.559.1.2.1.27.4.1.10 |
ipxcpMinimumRestartPeriodMinimum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.4.1.11 |
ipxcpMaximumRestartPeriodMaximum Restart Periodrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.4.1.12 |
ipxcpMaximumTerminateRequestsMaximum Terminate Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.4.1.13 |
ipxcpMaximumConfigRequestsMaximum Configure Requestsrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.4.1.14 |
ipxcpMaximumConfigNaksMaximum Configure Naksrw INTEGER .1.3.6.1.4.1.559.1.2.1.27.4.1.15 |
ipxcpNodeNumberThe MAC address of the local node.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.27.4.1.16 |
pppExtConfigTableThe PPP Ext Config Table SEQUENCE OF PppExtConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.5 |
pppExtConfigTableEntryInformation about a PPP Ext table entry. PppExtConfigTableEntry .1.3.6.1.4.1.559.1.2.1.27.5.1 |
pppExtLinkAuthenticationLink Authentication.rw Enumeration .1.3.6.1.4.1.559.1.2.1.27.5.1.1 |
pppExtEnableIpPass IP frames over the link.rw Enumeration .1.3.6.1.4.1.559.1.2.1.27.5.1.2 |
pppExtEnableIpxPass IPX frames over the link.rw Enumeration .1.3.6.1.4.1.559.1.2.1.27.5.1.3 |
pppExtHdlcLayerThe HDLC link type.rw Enumeration .1.3.6.1.4.1.559.1.2.1.27.5.1.4 |
firewall OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.28 |
ipFirewallStatusTableThe IP Firewall Status Table SEQUENCE OF IpFirewallStatusTableEntry .1.3.6.1.4.1.559.1.2.1.28.1 |
ipFirewallStatusTableEntryInformation about an IP firewall status table entry. IpFirewallStatusTableEntry .1.3.6.1.4.1.559.1.2.1.28.1.1 |
ipFirewallStatusIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.28.1.1.1 |
ipFirewallFilteredPacketsThe number of packets matching this entryro Counter .1.3.6.1.4.1.559.1.2.1.28.1.1.2 |
ipFirewallConfigTableThe IP Firewall Table SEQUENCE OF IpFirewallConfigTableEntry .1.3.6.1.4.1.559.1.2.1.28.2 |
ipFirewallConfigTableEntryInformation about an IP firewall table entry. IpFirewallConfigTableEntry .1.3.6.1.4.1.559.1.2.1.28.2.1 |
ipFirewallConfigIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.28.2.1.1 |
ipFirewallSourceAddressThe IP Firewall Source Addressrw IpAddress .1.3.6.1.4.1.559.1.2.1.28.2.1.2 |
ipFirewallSourceMaskThe IP Firewall Source Maskrw IpAddress .1.3.6.1.4.1.559.1.2.1.28.2.1.3 |
ipFirewallLowerSourcePortThe Source port or the lower number of a range of source ports.rw INTEGER .1.3.6.1.4.1.559.1.2.1.28.2.1.4 |
ipFirewallHigherSourcePortThe upper number of a range of source ports.rw INTEGER .1.3.6.1.4.1.559.1.2.1.28.2.1.5 |
ipFirewallDestinationAddressThe IP Firewall Destination Addressrw IpAddress .1.3.6.1.4.1.559.1.2.1.28.2.1.6 |
ipFirewallDestinationMaskThe IP Firewall Destination Maskrw IpAddress .1.3.6.1.4.1.559.1.2.1.28.2.1.7 |
ipFirewallLowerDestinationPortThe Destination port or the lower number of a range of destination ports.rw INTEGER .1.3.6.1.4.1.559.1.2.1.28.2.1.8 |
ipFirewallHigherDestinationPortThe upper number of a range of destination ports.rw INTEGER .1.3.6.1.4.1.559.1.2.1.28.2.1.9 |
ipFirewallRouterNameThe Router name to which frames are forwarded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.2.1.10 |
ipFirewallModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.2.1.11 |
ipFirewallTypeThe type of filtering requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.2.1.12 |
ipFirewallActionAccept or Deny the framerw Enumeration .1.3.6.1.4.1.559.1.2.1.28.2.1.13 |
ipFirewallBidirApply to bidirectional trafficrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.2.1.14 |
ipFirewallTcpsynEnable TCP SYNrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.2.1.15 |
ipxFirewallStatusTableThe IPX Firewall Status Table SEQUENCE OF IpxFirewallStatusTableEntry .1.3.6.1.4.1.559.1.2.1.28.3 |
ipxFirewallStatusTableEntryInformation about an IPX firewall status table entry. IpxFirewallStatusTableEntry .1.3.6.1.4.1.559.1.2.1.28.3.1 |
ipxFirewallStatusIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.28.3.1.1 |
ipxFirewallFilteredPacketsThe number of packets matching this entryro Counter .1.3.6.1.4.1.559.1.2.1.28.3.1.2 |
ipxFirewallConfigTableThe IPX Firewall Table SEQUENCE OF IpxFirewallConfigTableEntry .1.3.6.1.4.1.559.1.2.1.28.4 |
ipxFirewallConfigTableEntryInformation about an IPX firewall table entry. IpxFirewallConfigTableEntry .1.3.6.1.4.1.559.1.2.1.28.4.1 |
ipxFirewallConfigIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.28.4.1.1 |
ipxFirewallLowerSourceNetworkThe IPX Firewall source network number or the lower number of a range of source networks.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.2 |
ipxFirewallHigherSourceNetworkThe upper network number of a range of source networks.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.3 |
ipxFirewallLowerSourceNodeThe IPX Firewall source node number or the lower number of a range of source nodes.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.4.1.4 |
ipxFirewallHigherSourceNodeThe upper node number of a range of source nodes.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.4.1.5 |
ipxFirewallLowerSourceSocketThe IPX Firewall source socket number or the lower number of a range of source sockets.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.6 |
ipxFirewallHigherSourceSocketThe upper socket number of a range of source sockets.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.7 |
ipxFirewallLowerDestinationNetworkThe IPX Firewall destination network number or the lower number of a range of destination networks.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.8 |
ipxFirewallHigherDestinationNetworkThe upper network number of a range of destination networks.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.9 |
ipxFirewallLowerDestinationNodeThe IPX Firewall destination node number or the lower number of a range of destination nodes.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.4.1.10 |
ipxFirewallHigherDestinationNodeThe upper node number of a range of destination nodes.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.4.1.11 |
ipxFirewallLowerDestinationSocketThe IPX Firewall destination socket number or the lower number of a range of destination sockets.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.12 |
ipxFirewallHigherDestinationSocketThe upper socket number of a range of destination sockets.rw OCTET STRING .1.3.6.1.4.1.559.1.2.1.28.4.1.13 |
ipxFirewallRouterNameThe Router name to which frames are forwarded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.28.4.1.14 |
ipxFirewallModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.4.1.15 |
ipxFirewallActionAccept or Deny the framerw Enumeration .1.3.6.1.4.1.559.1.2.1.28.4.1.16 |
ipxFirewallBidirApply to bidirectional trafficrw Enumeration .1.3.6.1.4.1.559.1.2.1.28.4.1.17 |
users OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.29 |
usercfgTableA table of users which are allowed to use
this router. SEQUENCE OF UserCfgEntry .1.3.6.1.4.1.559.1.2.1.29.1 |
usercfgEntryA list of users. UserCfgEntry .1.3.6.1.4.1.559.1.2.1.29.1.1 |
usercfgIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.29.1.1.1 |
usercfgNameThe user name.rw DisplayString .1.3.6.1.4.1.559.1.2.1.29.1.1.2 |
usercfgMacThe MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.29.1.1.3 |
usercfgAllowedMake user activerw Enumeration .1.3.6.1.4.1.559.1.2.1.29.1.1.4 |
usercfgModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.29.1.1.5 |
srcEnabledFlag to enabled or disabled Scaleable Router Clustering.rw Enumeration .1.3.6.1.4.1.559.1.2.1.30 |
srcPriorityObject used to manually set a device to be a Master or Slave
device as part of Scaleable Router Clustering.rw Enumeration .1.3.6.1.4.1.559.1.2.1.31 |
ipnat OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.32 |
ipNatTranslateNetwork address translation.rw Enumeration .1.3.6.1.4.1.559.1.2.1.32.1 |
ipNatIpAddressThe IP address which the network should masquerade as.rw IpAddress .1.3.6.1.4.1.559.1.2.1.32.2 |
ipNatBogusNetworkThe IP network whose addresses are to be translated.rw IpAddress .1.3.6.1.4.1.559.1.2.1.32.3 |
ipNatBogusNetmaskThe netmask of the IP network whose address are to
be translated.rw IpAddress .1.3.6.1.4.1.559.1.2.1.32.4 |
ipNatTcpFinTimeoutThe timeout period in seconds for NAT sessions using
TCP which have been closed, but for which no Finis
packet has been received.rw INTEGER .1.3.6.1.4.1.559.1.2.1.32.5 |
ipNatTcpInactiveTimeoutThe timeout period in seconds for NAT sessions
using TCP.rw INTEGER .1.3.6.1.4.1.559.1.2.1.32.6 |
ipNatUdpTimeoutThe maximum duration in seconds for a NAT session
using UDP.rw INTEGER .1.3.6.1.4.1.559.1.2.1.32.7 |
ipNatMyselfTranslation packets to unit's management address?.rw Enumeration .1.3.6.1.4.1.559.1.2.1.32.8 |
dhcpserver OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.33 |
dhcpAutoStatusIf enabled, DHCP Server will allocate addresses.
Also, if enabled, DHCP Proxy and DHCP Relay will silently be disabled.rw Enumeration .1.3.6.1.4.1.559.1.2.1.33.1 |
dhcpAutoNameThe stem of hostnames to be allocated.rw DisplayString .1.3.6.1.4.1.559.1.2.1.33.2 |
dhcpAutoDomainThe domain-name of the hostnames to be allocated.rw DisplayString .1.3.6.1.4.1.559.1.2.1.33.3 |
dhcpAutoSeedStartInitial seed address used for automatically allocating IP addresses.
Warning: if this is changed, the lease table gets cleared automatically!rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.4 |
dhcpAutoSeedEndLast seed address used for automatically allocating IP addresses.rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.5 |
dhcpAutoMaskSubnet mask supplied to clients when automatically allocating IP
addresses.rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.6 |
dhcpAutoRouterIP Addr of Default Router for client.rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.7 |
dhcpWINSTableA table of WINS addresses supplied to clients. SEQUENCE OF DhcpWINSEntry .1.3.6.1.4.1.559.1.2.1.33.8 |
dhcpWINSEntryA WINS Address. DhcpWINSEntry .1.3.6.1.4.1.559.1.2.1.33.8.1 |
dhcpWINSIndexWINS Table Index.rw INTEGER .1.3.6.1.4.1.559.1.2.1.33.8.1.1 |
dhcpWINSAddrIP Addr of a WINS server for client.rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.8.1.2 |
dhcpDNSTableA table of DNS addresses supplied to clients. SEQUENCE OF DhcpDNSEntry .1.3.6.1.4.1.559.1.2.1.33.9 |
dhcpDNSEntryA DNS Address. DhcpDNSEntry .1.3.6.1.4.1.559.1.2.1.33.9.1 |
dhcpDNSIndexDNS Table Index.rw INTEGER .1.3.6.1.4.1.559.1.2.1.33.9.1.1 |
dhcpDNSAddrIP Addr of a DNS server for client.rw IpAddress .1.3.6.1.4.1.559.1.2.1.33.9.1.2 |
dhcpAutoLeaseAddress lease lifetime (in seconds). Lower limit is 300 (i.e. 5 min),
upper limit is 43200 (i.e. 12 hours).rw INTEGER .1.3.6.1.4.1.559.1.2.1.33.10 |
dhcpAstatTableA table of automatically allocated IP addresses. SEQUENCE OF DhcpAstatEntry .1.3.6.1.4.1.559.1.2.1.33.11 |
dhcpAstatEntryAn automatically allocated IP address. DhcpAstatEntry .1.3.6.1.4.1.559.1.2.1.33.11.1 |
dhcpAstatIpAddrAutomatically allocated IP Addr.ro IpAddress .1.3.6.1.4.1.559.1.2.1.33.11.1.1 |
dhcpAstatIfInterface over which IP address was allocated.ro Enumeration .1.3.6.1.4.1.559.1.2.1.33.11.1.2 |
dhcpAstatHwAddrHardware address of client to which IP address was allocated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.1.33.11.1.3 |
dhcpAstatCIDIdentifier of client to which IP address was allocated.ro OCTET STRING .1.3.6.1.4.1.559.1.2.1.33.11.1.4 |
dhcpAstatLifeRemaining lifetime of lease. -1 if permanent.ro INTEGER .1.3.6.1.4.1.559.1.2.1.33.11.1.5 |
pppAuthTableThe PPP Authentication Table. SEQUENCE OF PppAuthTableEntry .1.3.6.1.4.1.559.1.2.1.34 |
pppAuthTableEntryPPP authentication table entry. PppAuthTableEntry .1.3.6.1.4.1.559.1.2.1.34.1 |
pppAuthIndexIndex into the PPP authentication table.ro INTEGER .1.3.6.1.4.1.559.1.2.1.34.1.1 |
pppAuthNameName of the interface or ISDN number table entry.rw DisplayString .1.3.6.1.4.1.559.1.2.1.34.1.2 |
pppAuthClassThe PPP authentication mechanism used.rw Enumeration .1.3.6.1.4.1.559.1.2.1.34.1.3 |
pppAuthLocalIdPPP authentication local ID.rw DisplayString .1.3.6.1.4.1.559.1.2.1.34.1.4 |
pppAuthLocalPwPPP authentication local passwd. Always reads blank.rw DisplayString .1.3.6.1.4.1.559.1.2.1.34.1.5 |
pppAuthRemoteIdPPP authentication remote ID.rw DisplayString .1.3.6.1.4.1.559.1.2.1.34.1.6 |
pppAuthRemotePwPPP authentication remote passwd. Always reads blank.rw DisplayString .1.3.6.1.4.1.559.1.2.1.34.1.7 |
pppAuthRetryPeriodPPP authentication retry period in milliseconds.rw INTEGER .1.3.6.1.4.1.559.1.2.1.34.1.8 |
pppAuthRenegPeriodPPP authentication renogotiation period in seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.1.34.1.9 |
pppAuthRetryCountPPP authentication maxiumum number of retries.rw INTEGER .1.3.6.1.4.1.559.1.2.1.34.1.10 |
pppAuthModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.34.1.11 |
dnsproxy OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.35 |
primaryDNSAddressThe primary Domain Name System (DNS) server address to be
advertised to clients. This value will be ignored if DNS
Proxy is enabled, as in this case the address of this unit
will be advertised instead. A value of 0.0.0.0 causes no
address to be advertised.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.1 |
secondaryDNSAddressThe secondary Domain Name System (DNS) server address to be
advertised to clients. This value will be ignored if DNS
Proxy is enabled, as in this case the address of this unit
will be advertised instead.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.2 |
primaryNBNSAddressThe primary Netbios Name Server (NBNS) address to be
advertised to clients. A value of 0.0.0.0 causes no address
to be advertised.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.3 |
secondaryNBNSAddressThe secondary Netbios Name Server (NBNS) address to be
advertised to clients.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.4 |
dnsProxyActiveTRUE if the DNS proxy is enabled.rw Enumeration .1.3.6.1.4.1.559.1.2.1.35.5 |
dnsCacheSizeMaximum number of entries which may be held in the DNS cache if
DNS Proxy is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.1.35.6 |
dnsMaxServerTimeoutThe maximum time in seconds for which DNS Proxy will wait for a
response from a remote DNS server.rw INTEGER .1.3.6.1.4.1.559.1.2.1.35.7 |
dnsServerRetriesThe maximum number of times that transmission of a query to
remote DNS servers will be attempted.rw INTEGER .1.3.6.1.4.1.559.1.2.1.35.8 |
dnsDomainTableThe DNS Domain Table SEQUENCE OF DnsDomainTableEntry .1.3.6.1.4.1.559.1.2.1.35.9 |
dnsDomainTableEntryInformation about a DNS domain table entry. DnsDomainTableEntry .1.3.6.1.4.1.559.1.2.1.35.9.1 |
dnsDomainTableIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.35.9.1.1 |
dnsDomainDomainNameThe DNS Domain Name to which this table entry applies.rw DisplayString .1.3.6.1.4.1.559.1.2.1.35.9.1.2 |
dnsDomainProfileIndexThe index of the DNS Profile table entry associated with
this domain table entry. 0 indicates that there
is no profile associated with this entry.rw INTEGER .1.3.6.1.4.1.559.1.2.1.35.9.1.3 |
dnsDomainRemoteServerThe name of the route from which the addresses for remote DNS servers
will be obtained. This field does not need to be set if there is a DNS
Profile associated with this table entry.rw DisplayString .1.3.6.1.4.1.559.1.2.1.35.9.1.4 |
dnsDomainPrimaryDNSThe primary DNS server address for this domain. If this has the value
0.0.0.0 then the address is obtained from the remote server. This field
does not need to be set if there is a DNS Profile associated with this
table entry.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.9.1.5 |
dnsDomainSecondaryDNSThe secondary DNS server address for this domain. This field does not
need to be set if there is a DNS Profile associated with this entry.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.9.1.6 |
dnsDomainModeThe operation requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.35.9.1.7 |
dnsProfileTableA table of configuration profiles which describe the route to a remote
DNS server. Each entry may be associated with one or more entries in the
DNS domain table. SEQUENCE OF DnsProfileEntry .1.3.6.1.4.1.559.1.2.1.35.10 |
dnsProfileEntryA list of configuration profiles for remote DNS servers. DnsProfileEntry .1.3.6.1.4.1.559.1.2.1.35.10.1 |
dnsProfileIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.35.10.1.1 |
dnsProfileNameThe name of this DNS Profile.rw DisplayString .1.3.6.1.4.1.559.1.2.1.35.10.1.2 |
dnsProfileRemoteServerThe name of the route from which the addresses for remote DNS servers
will be obtained.rw DisplayString .1.3.6.1.4.1.559.1.2.1.35.10.1.3 |
dnsProfilePrimaryDNSThe primary DNS server address associated with this profile. If this has
the value 0.0.0.0 then the address is obtained from the remote server.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.10.1.4 |
dnsProfileSecondaryDNSThe secondary DNS server address associated with this profile.rw IpAddress .1.3.6.1.4.1.559.1.2.1.35.10.1.5 |
dnsProfileModeThe operation requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.35.10.1.6 |
memoryusage OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.1.36 |
memoryFreeTotal number of free bytes of memoryro INTEGER .1.3.6.1.4.1.559.1.2.1.36.1 |
memoryTotalTotal number of bytes of memory.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.2 |
fragmentCountNumber of fragments of memory.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.3 |
fragmentLargestSize of biggest fragment in bytes.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.4 |
pool1sizeSize of pool 1 in bytes.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.5 |
pool2sizeSize of pool 2 in bytes.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.6 |
pool3sizeSize of pool 3 in bytes.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.7 |
pool4sizeSize of pool 4 in bytes.ro INTEGER .1.3.6.1.4.1.559.1.2.1.36.8 |
traptableA table of trap addresses, ports and event-masks. SEQUENCE OF TrapTableEntry .1.3.6.1.4.1.559.1.2.1.37 |
traptableEntryTrap Details. TrapTableEntry .1.3.6.1.4.1.559.1.2.1.37.1 |
trapIndexTrap-Table Index.rw INTEGER .1.3.6.1.4.1.559.1.2.1.37.1.1 |
trapAddrIP Addr of a trap target.rw IpAddress .1.3.6.1.4.1.559.1.2.1.37.1.2 |
trapPortUDP Port on trap target.rw INTEGER .1.3.6.1.4.1.559.1.2.1.37.1.3 |
trapLogFullSend LogFull Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.4 |
trapLogThresholdSend LogThreshold Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.5 |
trapWarmStartSend WarmStart Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.6 |
trapLinkDownSend LinkDown Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.7 |
trapLinkUpSend LinkUp Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.8 |
trapVoiceDownSend VoiceDown Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.9 |
trapVoiceUpSend VoiceUp Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.10 |
trapISDNDownSend ISDNDown Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.11 |
trapISDNUpSend ISDNUp Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.12 |
trapAlarmSend Alarm Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.13 |
trapQ931FailSend Q931Fail Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.14 |
trapDASS2FailSend DASS2Fail Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.15 |
trapBriFailSend BriFail Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.16 |
trapLoginAuthSend LoginAuth Trap?rw Enumeration .1.3.6.1.4.1.559.1.2.1.37.1.17 |
patTableA table of Port Address Translation entries. SEQUENCE OF PatEntry .1.3.6.1.4.1.559.1.2.1.38 |
patEntryA list of PAT entries. PatEntry .1.3.6.1.4.1.559.1.2.1.38.1 |
patIndexIndexro INTEGER .1.3.6.1.4.1.559.1.2.1.38.1.1 |
patPortThe port to listen on.rw INTEGER .1.3.6.1.4.1.559.1.2.1.38.1.2 |
patInternalIPThe IP address to forward to.rw IpAddress .1.3.6.1.4.1.559.1.2.1.38.1.3 |
patInternalPortThe port to forward to.rw INTEGER .1.3.6.1.4.1.559.1.2.1.38.1.4 |
patModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.1.38.1.5 |
tpadLanPortThe port number of the virtual LAN connection to the AT
interface.rw INTEGER .1.3.6.1.4.1.559.1.2.1.39 |
ports OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.2 |
portsTableA table of configured physical ports. SEQUENCE OF PortsEntry .1.3.6.1.4.1.559.1.2.2.1 |
portsEntryA list of port configurations. PortsEntry .1.3.6.1.4.1.559.1.2.2.1.1 |
portsIndexThe physical port index, in the range 1 to
number-of-ports.ro INTEGER .1.3.6.1.4.1.559.1.2.2.1.1.1 |
portsNameThe port name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.2.1.1.2 |
portsTypeThe configured type of the port.rw Enumeration .1.3.6.1.4.1.559.1.2.2.1.1.3 |
portsPhysThe connector type.ro Enumeration .1.3.6.1.4.1.559.1.2.2.1.1.4 |
portsTxutilThe percentage of the port transmit capacity being
used multiplied by 1000.ro INTEGER .1.3.6.1.4.1.559.1.2.2.1.1.5 |
portsRxutilThe percentage of the port receive capacity being
used multiplied by 1000.ro INTEGER .1.3.6.1.4.1.559.1.2.2.1.1.6 |
portsCompressFor ports operating with LempelZiv compression,
this is the compression ratio multiplied by 10.ro INTEGER .1.3.6.1.4.1.559.1.2.2.1.1.7 |
portsStateThe operational state of the port.ro Enumeration .1.3.6.1.4.1.559.1.2.2.1.1.8 |
portsRxoctetsThe number of received octets on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.9 |
portsTxoctetsThe number of transmitted octets on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.10 |
portsRxpacketsThe number of received packets on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.11 |
portsTxpacketsThe number of transmitted packets on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.12 |
portsRxerrsThe number of receive errors on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.13 |
portsTxerrsThe number of transmit errors on this port.ro Counter .1.3.6.1.4.1.559.1.2.2.1.1.14 |
portslanTableA table of configured lan ports. SEQUENCE OF ArpPlusPortsLanEntry .1.3.6.1.4.1.559.1.2.2.2 |
portslanEntryA list of lan port configurations. ArpPlusPortsLanEntry .1.3.6.1.4.1.559.1.2.2.2.1 |
portslanIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.2.1.1 |
portslanNameThe name of the lan port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.2.1.2 |
portslanPriorityThe spanning tree priority of this port.rw INTEGER .1.3.6.1.4.1.559.1.2.2.2.1.3 |
portslanLinespeedThe linespeed of this port. Normally this should be
10000000 bits/secondrw INTEGER .1.3.6.1.4.1.559.1.2.2.2.1.4 |
portslanIpAddressThe IP Address assigned to this port when routing
is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.2.1.5 |
portslanIpMaskThe IP Address Mask assigned to this port when
routing is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.2.1.6 |
portslanIpMetricThe IP routing metric assigned to this port when
routing is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.2.2.1.7 |
portslanIpxNetworkThe IPX Network Address assigned to this port when
routing is enabled.rw OCTET STRING .1.3.6.1.4.1.559.1.2.2.2.1.8 |
portslanIpxTypeThe frame type used for IPX RIP and SAP messages
emanating from this port.rw Enumeration .1.3.6.1.4.1.559.1.2.2.2.1.9 |
portshdlcTableA table of configured hdlc ports. SEQUENCE OF ArpPlusPortsHdlcEntry .1.3.6.1.4.1.559.1.2.2.3 |
portshdlcEntryA list of hdlc port configurations. ArpPlusPortsHdlcEntry .1.3.6.1.4.1.559.1.2.2.3.1 |
portshdlcIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.1 |
portshdlcNameThe name of the hdlc port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.3.1.2 |
portshdlcPriorityThe spanning tree priority of this port.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.3 |
portshdlcLinespeedThe linespeed of this port. This is used to
calculate percentage load and Spanning tree
costs.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.4 |
portshdlcCompressionIf enabled, data is compressed using the Lempel
Ziv algorithm.rw Enumeration .1.3.6.1.4.1.559.1.2.2.3.1.5 |
portshdlcScrambleIf enabled, data is scrambled.rw Enumeration .1.3.6.1.4.1.559.1.2.2.3.1.6 |
portshdlcBackupdemandwhether to use the dialup backup and/or demand.rw Enumeration .1.3.6.1.4.1.559.1.2.2.3.1.7 |
portshdlcDemandthreshThreshold at which dialup demand is
invoked, if Backup/Demand is set to demand
or both in fraction of capacity * 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.8 |
portshdlcDemandperiodTime over which demand must exceed the demand
threshold before call will be established.
Measured in secondsrw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.9 |
portshdlcIdlethreshThreshold at which once dialup demand is
invoked, it will drop once load drops below
fraction of capacity * 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.10 |
portshdlcIdleperiodTime over which demand must be less than the idle
threshold before call will be dropped. Measured
in seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.11 |
portshdlcBackupalertIf enabled, the alert light will be lit whilst
a backup call is made.rw Enumeration .1.3.6.1.4.1.559.1.2.2.3.1.12 |
portshdlcDemandpriorityPriority of the demand call, since it may be
bumped by a higher priority call.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.13 |
portshdlcBackuppriorityPriority of the backup call, since it may be
bumped by a higher priority call.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.14 |
portshdlcBackupnumberTelephone number(name of remote router)
of the backup link.rw DisplayString .1.3.6.1.4.1.559.1.2.2.3.1.15 |
portshdlcBackupMacThe MAC address of the backup bridge.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.2.3.1.16 |
portshdlcIpAddressThe IP Address assigned to this port when routing
is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.3.1.17 |
portshdlcIpMaskThe IP Address Mask assigned to this port when
routing is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.3.1.18 |
portshdlcIpMetricThe IP routing metric assigned to this port when
routing is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.2.3.1.19 |
portshdlcIpxNetworkThe IPX Network Address assigned to this port when
routing is enabled.rw OCTET STRING .1.3.6.1.4.1.559.1.2.2.3.1.20 |
portshdlcIpxTypeThe frame type used for IPX RIP and SAP messages
emanating from this port.rw Enumeration .1.3.6.1.4.1.559.1.2.2.3.1.21 |
portspppTableA table of configured ppp ports. SEQUENCE OF ArpPlusPortsPppEntry .1.3.6.1.4.1.559.1.2.2.4 |
portspppEntryA list of ppp port configurations. ArpPlusPortsPppEntry .1.3.6.1.4.1.559.1.2.2.4.1 |
portspppIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.4.1.1 |
portspppNameThe name of the ppp port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.4.1.2 |
portspppPriorityThe spanning tree priority of this port.rw INTEGER .1.3.6.1.4.1.559.1.2.2.4.1.3 |
portspppLinespeedThe linespeed of this port. This is used to
calculate percentage load and Spanning tree
costs.rw INTEGER .1.3.6.1.4.1.559.1.2.2.4.1.4 |
portspppIpAddressThe IP Address assigned to this port when routing
is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.4.1.5 |
portspppIpMaskThe IP Address Mask assigned to this port when
routing is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.4.1.6 |
portspppIpMetricThe IP routing metric assigned to this port when
routing is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.2.4.1.7 |
portspppIpxNetworkThe IPX Network Address assigned to this port when
routing is enabled.rw OCTET STRING .1.3.6.1.4.1.559.1.2.2.4.1.8 |
portspppIpxTypeThe frame type used for IPX RIP and SAP messages
emanating from this port.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.9 |
portspppBaudThe Baud Rate.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.10 |
portspppDataBitsThe number of data bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.11 |
portspppStopBitsThe number of stop bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.12 |
portspppFlowControlFlow Control.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.13 |
portspppTxParityTransmit Parity.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.14 |
portspppRxParityReceive Parity.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.15 |
portspppRemoteUnitRemote Unit Type.rw Enumeration .1.3.6.1.4.1.559.1.2.2.4.1.16 |
portspppIPRemoteAddressRemote IP Address.rw IpAddress .1.3.6.1.4.1.559.1.2.2.4.1.17 |
portstaTableA table of configured ta ports. SEQUENCE OF PortstaEntry .1.3.6.1.4.1.559.1.2.2.5 |
portstaEntryA list of ta port configurations. PortstaEntry .1.3.6.1.4.1.559.1.2.2.5.1 |
portstaIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.1 |
portstaNameThe name of the ta port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.5.1.2 |
portstaPriorityThe spanning tree priority of this port.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.3 |
portstaLinespeedThe linespeed of this port. This is used to
calculate percentage load and Spanning tree
costs.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.4 |
portstaCompressionIf enabled, data is compressed using the Lempel
Ziv algorithm.rw Enumeration .1.3.6.1.4.1.559.1.2.2.5.1.5 |
portstaScrambleIf enabled, data is scrambled.rw Enumeration .1.3.6.1.4.1.559.1.2.2.5.1.6 |
portstaDemandwhether to use enable demand top-up.rw Enumeration .1.3.6.1.4.1.559.1.2.2.5.1.7 |
portstaDemandthreshThreshold at which dialup demand is
invoked, if Backup/Demand is set to demand
or both in fraction of capacity * 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.8 |
portstaDemandperiodTime over which demand must exceed the demand
threshold before call will be established.
Measured in secondsrw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.9 |
portstaIdlethreshThreshold at which once dialup demand is
invoked, it will drop once load drops below
fraction of capacity * 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.10 |
portstaIdleperiodTime over which demand must be less than the idle
threshold before call will be dropped. Measured
in seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.11 |
portstaDemandpriorityPriority of the demand call, since it may be
bumped by a higher priority call.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.13 |
portstaDialtimeoutThe time in seconds for which bridge will wait for an
OK response from the external TA.rw INTEGER .1.3.6.1.4.1.559.1.2.2.5.1.17 |
portstaAtzstringInitialization string for the TA.rw DisplayString .1.3.6.1.4.1.559.1.2.2.5.1.18 |
portstaSpidstringSPID string for the TA.rw DisplayString .1.3.6.1.4.1.559.1.2.2.5.1.19 |
portsslipTableA table of configured slip ports. SEQUENCE OF ArpPlusPortsSlipEntry .1.3.6.1.4.1.559.1.2.2.6 |
portsslipEntryA list of slip port configurations. ArpPlusPortsSlipEntry .1.3.6.1.4.1.559.1.2.2.6.1 |
portsslipIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.6.1.1 |
portsslipNameThe name of the slip port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.6.1.2 |
portsslipPriorityThe spanning tree priority of this port.rw INTEGER .1.3.6.1.4.1.559.1.2.2.6.1.3 |
portsslipLinespeedThe linespeed of this port. This is used to
calculate percentage load and Spanning tree
costs.rw INTEGER .1.3.6.1.4.1.559.1.2.2.6.1.4 |
portsslipIpAddressThe IP Address assigned to this port when routing
is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.6.1.5 |
portsslipIpMaskThe IP Address Mask assigned to this port when
routing is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.2.6.1.6 |
portsslipIpMetricThe IP routing metric assigned to this port when
routing is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.2.6.1.7 |
portsslipBaudThe Baud Rate.rw Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.8 |
portsslipDataBitsThe number of data bits.ro Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.9 |
portsslipStopBitsThe number of stop bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.10 |
portsslipFlowControlFlow Control.rw Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.11 |
portsslipTxParityTransmit Parity.ro Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.12 |
portsslipRxParityReceive Parity.ro Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.13 |
portsslipMTUMaximum Transmit Unit Lengthrw INTEGER .1.3.6.1.4.1.559.1.2.2.6.1.14 |
portsslipRIPPrivateAdvertise IP Routerw Enumeration .1.3.6.1.4.1.559.1.2.2.6.1.15 |
portsslipIPRemoteAddressRemote IP Address.rw IpAddress .1.3.6.1.4.1.559.1.2.2.6.1.16 |
portsasyncTableA table of configured asynchronous serial manager ports. SEQUENCE OF ArpPlusPortsAsyncEntry .1.3.6.1.4.1.559.1.2.2.7 |
portsasyncEntryA list of asynchronous serial manager port configurations. ArpPlusPortsAsyncEntry .1.3.6.1.4.1.559.1.2.2.7.1 |
portsasyncIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.1 |
portsasyncNameThe name of the asynchronous serial manager port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.2 |
portsasyncBaudThe Baud Rate.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.3 |
portsasyncDataBitsThe number of data bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.4 |
portsasyncStopBitsThe number of stop bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.5 |
portsasyncFlowControlFlow Control.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.6 |
portsasyncTxParityTransmit Parity.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.7 |
portsasyncRxParityReceive Parity.rw Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.8 |
portsvoiceTableA table of configured voice ports. SEQUENCE OF PortsvoiceEntry .1.3.6.1.4.1.559.1.2.2.8 |
portsvoiceEntryA list of voice port configurations. PortsvoiceEntry .1.3.6.1.4.1.559.1.2.2.8.1 |
portsvoiceIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.8.1.1 |
portsvoiceNameThe name of the voice port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.8.1.2 |
portsvoiceCallsPermittedControls whether incoming, outgoing or both types
of voice call are permitted.rw Enumeration .1.3.6.1.4.1.559.1.2.2.8.1.3 |
portsvoiceEncodingThe sound encoding mecanism used.rw Enumeration .1.3.6.1.4.1.559.1.2.2.8.1.4 |
portsvoiceDialModeControls whether each digit dialed is sent to the
network immediately, or the whole number sent complete.rw Enumeration .1.3.6.1.4.1.559.1.2.2.8.1.5 |
portstpadTableA table of configured tpad ports. SEQUENCE OF PortstpadEntry .1.3.6.1.4.1.559.1.2.2.9 |
portstpadEntryA list of tpad port configurations. PortstpadEntry .1.3.6.1.4.1.559.1.2.2.9.1 |
portstpadIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.2.9.1.1 |
portstpadNameThe name of the tpad port.rw DisplayString .1.3.6.1.4.1.559.1.2.2.9.1.2 |
portstpadBaudThe Baud Rate.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.3 |
portstpadDataBitsThe number of data bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.4 |
portstpadStopBitsThe number of stop bits.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.5 |
portstpadParityParity.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.6 |
portstpadTxFlowControlTransmit Flow Control.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.7 |
portstpadRxFlowControlReceive Flow Control.rw Enumeration .1.3.6.1.4.1.559.1.2.2.9.1.8 |
portstpadX25MinLCNX25 Minimum LCNrw INTEGER .1.3.6.1.4.1.559.1.2.2.9.1.9 |
portstpadX25MaxLCNX25 Maximum LCNrw INTEGER .1.3.6.1.4.1.559.1.2.2.9.1.10 |
bridge OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3 |
mlink OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1 |
mlinkTableA table of Multi-link links. SEQUENCE OF MlinkEntry .1.3.6.1.4.1.559.1.2.3.1.1 |
mlinkEntryA MLINK ports. MlinkEntry .1.3.6.1.4.1.559.1.2.3.1.1.1 |
mlinkIndexThe index of this mlink link 1 to N.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.1.1 |
mlinkNameThe name of the Bridge connected to by this linkro DisplayString .1.3.6.1.4.1.559.1.2.3.1.1.1.2 |
mlinkNumberOfPortsNumber of actual ports that make this mlinkro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.1.3 |
mlinkInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.1.4 |
mlinkOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.1.5 |
mlinkInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.1.6 |
mlinkStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.1.7 |
filter OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.2 |
filterTableA table of filter address pairs. SEQUENCE OF FilterEntry .1.3.6.1.4.1.559.1.2.3.2.1 |
filterEntryA list of information for each filter pair. FilterEntry .1.3.6.1.4.1.559.1.2.3.2.1.1 |
filterDestThe destination Mac Address for the filter pair.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.2.1.1.1 |
filterSourceThe source Mac Address for the filter pair.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.2.1.1.2 |
filterPrimaryThis is the primary entry of the filter pair.ro Enumeration .1.3.6.1.4.1.559.1.2.3.2.1.1.3 |
filterTypeThis is a permanent not a learned entry. Set
this to delete to delete the entry and its partner.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.1.1.4 |
filterRouteThe link down which the destination is to be
found.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.2.1.1.5 |
filterPacketcountThe number of packets received by this destination
from this source; may be reset to 0.rw INTEGER .1.3.6.1.4.1.559.1.2.3.2.1.1.6 |
filterBytecountThe number of bytes received by this destination
from this source; may be reset to 0.rw INTEGER .1.3.6.1.4.1.559.1.2.3.2.1.1.7 |
filtertypeTableA table filter types. SEQUENCE OF FilterTypeEntry .1.3.6.1.4.1.559.1.2.3.2.2 |
filtertypeEntryA list of types to filter on. FilterTypeEntry .1.3.6.1.4.1.559.1.2.3.2.2.1 |
filtertypeIndexThe index of the type filter entry.rw INTEGER .1.3.6.1.4.1.559.1.2.3.2.2.1.1 |
filtertypeClassThe entry class, or set to delete to remove.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.2.1.2 |
filtertypeLsapFor ieee, this is in the range 0..255,
For ethernet, in the range 0..65535.rw INTEGER .1.3.6.1.4.1.559.1.2.3.2.2.1.3 |
filtertypeModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.2.2.1.4 |
filterAgingtimeFor learned entries, this gives the time in
seconds after which the learned entries are
discarded.rw INTEGER .1.3.6.1.4.1.559.1.2.3.2.3 |
filterLearningIf disabled, this stops the bridge from learning
new entries.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.4 |
filterActiononmatchIf packet matches an entry in the filter table,
reject or forward the packet.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.5 |
filterFiltermcastIf disabled, pass through multicast addresses
unfiltered.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.6 |
filterTypematchingIf enabled, then check whether the Type/Lsap of
the packet is in the type table before forwarding.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.7 |
filterTypematchactionIf type matching enabled, then reject or forward
packets whose Lsap/Type are in the table.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.8 |
filterLearnsourceonmcastIf enabled, then learn source location from
multicast packets.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.9 |
filterFlushallIf true, then the bridge will retire all learned
entries.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.10 |
filterLearnnovellIf true, then the bridge will learn Novell server
addresses and enter them into the autocall table.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.11 |
filterLearnbridgingEnables or disables bridging.rw Enumeration .1.3.6.1.4.1.559.1.2.3.2.12 |
authorised OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.3 |
authorisedTableA table of bridges allowed to join the network. SEQUENCE OF AuthorisedEntry .1.3.6.1.4.1.559.1.2.3.3.1 |
authorisedEntryA list of authorised bridges. AuthorisedEntry .1.3.6.1.4.1.559.1.2.3.3.1.1 |
authorisedIndexThe MAC address of an authorised bridge.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.3.1.1.1 |
authorisedAddressThe Mac Address of the bridge authorised to use the
network.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.3.1.1.2 |
authorisedModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.3.1.1.3 |
isdn OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4 |
autocall OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.1 |
autocallMacTableA table of telephone numbers which are
automatically dialled upon receipt of MAC addresses. SEQUENCE OF AutocallMacEntry .1.3.6.1.4.1.559.1.2.3.4.1.2 |
autocallMacEntryA list of calls. AutocallMacEntry .1.3.6.1.4.1.559.1.2.3.4.1.2.1 |
autocallMacIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.2.1.1 |
autocallMacDefaultDefault MAC Autocallrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.2.1.2 |
autocallMacBumpableMake autocall bumpablerw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.2.1.3 |
autocallMacIdleNumber of seconds this call can be idle before call
is dropped.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.2.1.4 |
autocallMacIdleThresholdIdle is defined by the line being less than a
certain activity. Full load is 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.2.1.5 |
autocallMacAddressThe MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.2.1.6 |
autocallMacIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.2.1.7 |
autocallMacModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.2.1.8 |
autocallIpTableA table of telephone numbers which are
automatically dialled upon receipt of IP addresses. SEQUENCE OF AutocallIpEntry .1.3.6.1.4.1.559.1.2.3.4.1.3 |
autocallIpEntryA list of calls. AutocallIpEntry .1.3.6.1.4.1.559.1.2.3.4.1.3.1 |
autocallIpIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.3.1.1 |
autocallIpBumpableMake autocall bumpablerw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.3.1.2 |
autocallIpIdleNumber of seconds this call can be idle before call
is dropped.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.3.1.3 |
autocallIpIdleThresholdIdle is defined by the line being less than a
certain activity. Full load is 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.3.1.4 |
autocallIpAddressThe IP address.rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.1.3.1.5 |
autocallIpMaskThe IP mask.rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.1.3.1.6 |
autocallIpInverseMake inverse autocallrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.3.1.7 |
autocallIpIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.3.1.8 |
autocallIpModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.3.1.9 |
autocallIpxSapTableA table of telephone numbers which are
automatically dialled upon receipt of IPX SAP addresses. SEQUENCE OF AutocallIpxSapEntry .1.3.6.1.4.1.559.1.2.3.4.1.4 |
autocallIpxSapEntryA list of calls. AutocallIpxSapEntry .1.3.6.1.4.1.559.1.2.3.4.1.4.1 |
autocallIpxSapIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.4.1.1 |
autocallIpxSapServerThe SAP server name.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.4.1.2 |
autocallIpxSapNetworkThe SAP network number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.4.1.3 |
autocallIpxSapNodeThe SAP node number.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.4.1.4 |
autocallIpxSapSocketThe SAP socket number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.4.1.5 |
autocallIpxSapServiceThe SAP service type.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.4.1.6 |
autocallIpxSapHopsNumber of hops.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.4.1.7 |
autocallIpxSapIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.4.1.8 |
autocallIpxSapFrameTypeThe frame type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.4.1.9 |
autocallIpxSapDirectNetworkThe Direct network number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.4.1.10 |
autocallIpxSapRouterMacThe Router Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.4.1.11 |
autocallIpxSapNearestIn bridging mode, generate nearest server response for this server.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.4.1.12 |
autocallIpxSapPppPPP Mode.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.4.1.13 |
autocallIpxSapIsdnTypeThe ISDN type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.4.1.14 |
autocallIpxSapModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.4.1.15 |
autocallIpxTableA table of telephone numbers which are
automatically dialled upon receipt of IPX addresses. SEQUENCE OF AutocallIpxEntry .1.3.6.1.4.1.559.1.2.3.4.1.5 |
autocallIpxEntryA list of calls. AutocallIpxEntry .1.3.6.1.4.1.559.1.2.3.4.1.5.1 |
autocallIpxIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.5.1.1 |
autocallIpxNetworkThe network number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.5.1.2 |
autocallIpxNodeThe node number.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.5.1.3 |
autocallIpxPacketTypePacket Type.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.5.1.4 |
autocallIpxTransportControlTransport Control.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.5.1.5 |
autocallIpxIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.5.1.6 |
autocallIpxBumpableMake autocall bumpablerw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.7 |
autocallIpxIdleNumber of seconds this call can be idle before call
is dropped.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.5.1.8 |
autocallIpxIdleThresholdIdle is defined by the line being less than a
certain activity. Full load is 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.5.1.9 |
autocallIpxDefaultDefault IPX Autocallrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.10 |
autocallIpxFrameTypeThe frame type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.11 |
autocallIpxPppPPP Mode.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.12 |
autocallIpxIsdnTypeThe ISDN type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.13 |
autocallIpxModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.5.1.14 |
autocallIpxRipTableA table of telephone numbers which are
automatically dialled upon receipt of IPX RIP addresses. SEQUENCE OF AutocallIpxRipEntry .1.3.6.1.4.1.559.1.2.3.4.1.6 |
autocallIpxRipEntryA list of calls. AutocallIpxRipEntry .1.3.6.1.4.1.559.1.2.3.4.1.6.1 |
autocallIpxRipIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.6.1.1 |
autocallIpxRipNetworkThe network number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.6.1.2 |
autocallIpxRipHopsNumber of Hops.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.6.1.3 |
autocallIpxRipTicksNumber of Ticks.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.6.1.4 |
autocallIpxRipNodeThe node number.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.6.1.5 |
autocallIpxRipIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.6.1.6 |
autocallIpxRipFrameTypeThe frame type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.6.1.7 |
autocallIpxRipDirectNetworkThe Direct network number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.6.1.8 |
autocallIpxRipRouterMacThe Router Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.1.6.1.9 |
autocallIpxRipLinkTicksNumber of Link Ticks.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.6.1.10 |
autocallIpxRipPppPPP Mode.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.6.1.11 |
autocallIpxRipIsdnTypeThe ISDN type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.6.1.12 |
autocallIpxRipModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.6.1.13 |
autocallDialTableA table of telephone numbers which are
automatically dialled upon receipt of an ISDN call with
a matching CLI response. SEQUENCE OF AutocallDialEntry .1.3.6.1.4.1.559.1.2.3.4.1.7 |
autocallDialEntryA list of calls. AutocallDialEntry .1.3.6.1.4.1.559.1.2.3.4.1.7.1 |
autocallDialIndexIndexro OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.1.7.1.1 |
autocallDialCliThe ISDN telephone number to match.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.7.1.2 |
autocallDialIsdnThe ISDN telephone number to call.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.1.7.1.3 |
autocallDialBumpableMake autocall bumpablerw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.7.1.4 |
autocallDialIdleNumber of seconds this call can be idle before call
is dropped.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.7.1.5 |
autocallDialIdleThresholdIdle is defined by the line being less than a
certain activity. Full load is 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.1.7.1.6 |
autocallDialModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.1.7.1.7 |
isdnbands OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.2 |
isdnbandsTableA table of isdn timebands and their properties. SEQUENCE OF IsdnbandsEntry .1.3.6.1.4.1.559.1.2.3.4.2.1 |
isdnbandsEntryA list of isdn timebands. IsdnbandsEntry .1.3.6.1.4.1.559.1.2.3.4.2.1.1 |
isdnbandsIndexThe index of this ISDN band.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.2.1.1.1 |
isdnbandsNameThe name of this ISDN band.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.2.1.1.2 |
isdnbandsStarttimeThe start time in seconds since midnight.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.2.1.1.3 |
isdnbandsEndtimeThe end time in seconds since midnight.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.2.1.1.4 |
isdnbandsDaysDays of the week assigned to this timeband,
separated by colons.
Use abbreviations : monday - Mo
tuesday - Tu
wednesday - We
thursday - Th
friday - Fr
saturday - Sa
sunday - Su
eg saturday and sunday is Sa:Su .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.2.1.1.5 |
isdnbandsAllowbackupAllow isdn calls to be made to back up bridge links
during this time.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.2.1.1.6 |
isdnbandsAllowdemandAllow isdn calls to be made for demand bandwidth
during this time.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.2.1.1.7 |
isdnbandsAllowautocallAllow isdn calls to be made for autocalls
during this time.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.2.1.1.8 |
isdnbandsAllowlistAllow isdn calls to be made to ISDN numbers on the
list for this timeband during this time.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.2.1.1.9 |
isdnbandsModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.2.1.1.12 |
isdnbandsBridgeListTableA table of isdn timebands and their properties. SEQUENCE OF IsdnbandsBridgeListEntry .1.3.6.1.4.1.559.1.2.3.4.2.2 |
isdnbandsBridgeListEntryA list of isdn timebands. IsdnbandsBridgeListEntry .1.3.6.1.4.1.559.1.2.3.4.2.2.1 |
isdnbandsBridgeListIndexThe index of this ISDN band.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.2.2.1.1 |
isdnbandsBridgeListBandNameThe name of this ISDN band.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.2.2.1.2 |
isdnbandsBridgeListBridgeNameThe name of this ISDN band.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.2.2.1.3 |
isdnnumbers OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.3 |
isdnnumbersTableA table of isdn numbers against names. SEQUENCE OF ArpPlusIsdnNumbersEntry .1.3.6.1.4.1.559.1.2.3.4.3.1 |
isdnnumbersEntryA list of isdn numbers. ArpPlusIsdnNumbersEntry .1.3.6.1.4.1.559.1.2.3.4.3.1.1 |
isdnnumbersIndexThe index of this ISDN number.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.3.1.1.1 |
isdnnumbersNameThe name of this ISDN number.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.2 |
isdnnumbersNumber1The ISDN number (1).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.3 |
isdnnumbersNumber2The ISDN number (2).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.4 |
isdnnumbersNumber3The ISDN number (3).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.5 |
isdnnumbersNumber4The ISDN number (4).ro DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.6 |
isdnnumbersCallIf set to request, then call will be immediately
made to this destination. Cancel will cancel any
calls to this destination.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.7 |
isdnnumbersTesttimeThe time at which a test-call will be made
(in seconds since midnight).rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.3.1.1.8 |
isdnnumbersDaysDays of the week on which testcalls will be made,
separated by colons.
Use abbreviations : monday - Mo
tuesday - Tu
wednesday - We
thursday - Th
friday - Fr
saturday - Sa
sunday - Su
eg saturday and sunday is Sa:Su .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.3.1.1.9 |
isdnnumbersLasttestThe Day/Month of the last successful testcall.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.3.1.1.10 |
isdnnumbersIpAddressThe IP Address assigned to this port when routing
is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.3.1.1.11 |
isdnnumbersIpMaskThe IP Address Mask assigned to this port when
routing is enabled.rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.3.1.1.12 |
isdnnumbersIpMetricThe IP routing metric assigned to this port when
routing is enabled.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.3.1.1.13 |
isdnnumbersIpxNetworkThe IPX Network Address assigned to this port when
routing is enabled.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.4.3.1.1.14 |
isdnnumbersIpxTypeThe frame type used for IPX RIP and SAP messages
emanating from this port.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.15 |
isdnnumbersPppEnable/Disable the PPP protocol for this number.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.16 |
isdnnumbersRemoteIpAddressThe IP Address for the remote unit.rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.3.1.1.17 |
isdnnumbersRemoteUnitTypeThe remote unit type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.18 |
isdnnumbersHdlcTypeThe HDLC link type.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.19 |
isdnnumbersPppAuthenticationThe PPP negotiation status.ro Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.20 |
isdnnumbersMaxCircuitsThe max number of ISDN Circuits (1 or 2).rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.3.1.1.21 |
isdnnumbersMPEnablePPP Multilink.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.22 |
isdnnumbersLearntEDLearnt endpoint descriminator.ro DisplayString .1.3.6.1.4.1.559.1.2.3.4.3.1.1.23 |
isdnnumbersModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.24 |
isdnnumbersCallType1rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.25 |
isdnnumbersCallType2rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.26 |
isdnnumbersCallType3rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.27 |
isdnnumbersCallType4rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.3.1.1.28 |
isdnports OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.4 |
isdnportsTableA table of isdn ports. SEQUENCE OF IsdnportsEntry .1.3.6.1.4.1.559.1.2.3.4.4.1 |
isdnportsEntryA table of isdn ports. IsdnportsEntry .1.3.6.1.4.1.559.1.2.3.4.4.1.1 |
isdnportsIndexThe physical port index, in the range 1 to
number-of-ports, as found in the ports table.ro INTEGER .1.3.6.1.4.1.559.1.2.3.4.4.1.1.1 |
isdnportsDestinationThe destination number that this ISDN number is connected to.ro DisplayString .1.3.6.1.4.1.559.1.2.3.4.4.1.1.2 |
isdnportsStateCurrent state of the portro Enumeration .1.3.6.1.4.1.559.1.2.3.4.4.1.1.3 |
isdnportsConnTimeThe connection time (in hundredths of a second).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.559.1.2.3.4.4.1.1.4 |
isdnportsBackupIf set to true, then the call is a backup call.ro Enumeration .1.3.6.1.4.1.559.1.2.3.4.4.1.1.5 |
isdnportsDemandIf set to true, then the call is a demand call.ro Enumeration .1.3.6.1.4.1.559.1.2.3.4.4.1.1.6 |
isdnportsBumpableIf set to true, then the call is a bumpable call.ro Enumeration .1.3.6.1.4.1.559.1.2.3.4.4.1.1.7 |
isdnportsAlertcurrent Alert Statero Enumeration .1.3.6.1.4.1.559.1.2.3.4.4.1.1.8 |
isdnportsPrioritycurrent call priorityro INTEGER .1.3.6.1.4.1.559.1.2.3.4.4.1.1.9 |
isdnportsSourceMacSource Mac of Bridge that requested the callro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.4.1.1.10 |
isdnhistory OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.5 |
isdnhistoryTableA table of isdn ports. SEQUENCE OF IsdnhistoryEntry .1.3.6.1.4.1.559.1.2.3.4.5.1 |
isdnhistoryEntryA table of isdn ports. IsdnhistoryEntry .1.3.6.1.4.1.559.1.2.3.4.5.1.1 |
isdnhistoryIndexThe index of this ISDN history 1 to N.ro INTEGER .1.3.6.1.4.1.559.1.2.3.4.5.1.1.1 |
isdnhistoryDestinationThe destination ISDN number.ro DisplayString .1.3.6.1.4.1.559.1.2.3.4.5.1.1.2 |
isdnhistoryTotalTimeTotal Time of all calls to this destination
(in hundredths of a second)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.559.1.2.3.4.5.1.1.3 |
isdnhistoryTotalCallsThe total number of calls to this destinationro INTEGER .1.3.6.1.4.1.559.1.2.3.4.5.1.1.4 |
isdnhistoryFailedCallsThe total number of failed calls to this destinationro INTEGER .1.3.6.1.4.1.559.1.2.3.4.5.1.1.5 |
isdncla OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.6 |
isdnCliTableA table of ISDN Numbers for bridges allowed to
join the network. SEQUENCE OF IsdnCliEntry .1.3.6.1.4.1.559.1.2.3.4.6.1 |
isdnCliEntryA list of ISDN Numbers for authorised bridges. IsdnCliEntry .1.3.6.1.4.1.559.1.2.3.4.6.1.1 |
isdnCliIndexThe number of the entry.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.6.1.1.1 |
isdnCliNumberThe ISDN number of the bridge authorised to use the
network.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.3.4.6.1.1.2 |
isdnCliModeThe Operation Requiredrw Enumeration .1.3.6.1.4.1.559.1.2.3.4.6.1.1.3 |
isdnlists OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.7 |
isdnlistsTableA table of isdn timeband bridge lists. SEQUENCE OF IsdnlistsEntry .1.3.6.1.4.1.559.1.2.3.4.7.1 |
isdnlistsEntryA list of isdn bridge lists. IsdnlistsEntry .1.3.6.1.4.1.559.1.2.3.4.7.1.1 |
isdnlistsIndexThe index of this bridge.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.7.1.1.1 |
isdnlistsBandThe timeband for this list.
Set null-length string here to delete an entry.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.7.1.1.2 |
isdnlistsNameThe name of this bridge.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.7.1.1.3 |
isdnParams OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.8 |
isdnParamsNetworkTypeISDN Network Type. The device must be rebooted for a change of
of this object to take effect.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.1 |
isdnParamsSpid1Service Profile ID 1 (USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.2 |
isdnParamsSpid2Service Profile ID 2 (USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.3 |
isdnParamsSpid3Service Profile ID 1 (2nd TA - USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.4 |
isdnParamsSpid4Service Profile ID 2 (2nd TA - USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.5 |
isdnParamsDirectoryNumber1Directory Number 1 (USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.6 |
isdnParamsDirectoryNumber2Directory Number 2 (USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.7 |
isdnParamsDirectoryNumber3Directory Number 3 (2nd TA for USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.8 |
isdnParamsDirectoryNumber4Directory Number 4 (2nd TA for USA Network Types only).rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.9 |
isdnParamsReportBusySend a positibe Busy reponse to an incoming call if no free port.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.10 |
isdnParamsIncomingDovShould an incoming voice call be answerred as a data call.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.11 |
isdnParamsMaxCallTimeMaximum Call time in seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.8.12 |
isdnParamsMsn OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.8.13 |
isdnParamsMsnLanMultiple Subscriber Number for LAN access.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.13.1 |
isdnParamsMsnVoiceMultiple Subscriber Number for Voice access.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.13.2 |
isdnParamsMsnCheckShould the incoming MSN be checked before answerring an
incoming call.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.13.3 |
isdnParamsMsnSendShould the MSN be sent in outgoing calls.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.13.4 |
isdnParamsSubAddr OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.8.14 |
isdnParamsSubAddrLanSub Address for LAN access.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.14.1 |
isdnParamsSubAddrVoiceSub Address for Voice access.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.8.14.2 |
isdnParamsSubAddrCheckShould the incoming Sub Address be checked before answerring an
incoming call.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.14.3 |
isdnParamsSubAddrSendShould the Sub Address be sent in outgoing calls.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.14.4 |
isdnParamsSubAddrTypeWhat format should outgoing an Sub Address take.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.14.5 |
isdnParamsTokenValueISDN time token value. When tokens are refilled,
the isdnParamsTokenRemain variable is set to this value
NOTE: -1 = disabledrw INTEGER .1.3.6.1.4.1.559.1.2.3.4.8.15 |
isdnParamsTokenRefillISDN token Refill Mechanism type
- 'disabled' No token mechanism.
- 'manual' left for user to refill tokens manually.
- 'auto' reset the tokens every day at 23:59.59
- 'refill' refills the tokens.
NOTE: In order to set 'manuall and 'auto',
isdnParamsTokenRemain must not be -1 (disabled)rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.8.16 |
isdnParamsTokenRemainDisplays the remaining number of ISDN tokens left for ISDN usage.
NOTE: -1 = disabledro INTEGER .1.3.6.1.4.1.559.1.2.3.4.8.17 |
bootp OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.4.9 |
bootpActiveTRUE if BOOTP/DHCP broadcasts are to be bridged (when box is in bridge mode).
TRUE if BOOTP/DHCP relay agent is to be active (when box is in router mode).
If set, then DHCP Proxy and DHCP Server will be silent disabled.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.9.1 |
bootpBumpable(Bridge mode only) If we receive an autocall
to another destination and no free channels,
bump this call.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.9.2 |
bootpIdle(Bridge mode only) Number of seconds this call
can be idle before call is dropped.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.9.3 |
bootpIdleThreshold(Bridge mode only) Idle is defined by the line
being less than a certain activity. Full load
is 1000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.9.4 |
bootpIsdnName(Bridge mode only) The name of the ISDN telephone
number entry to be called.rw DisplayString .1.3.6.1.4.1.559.1.2.3.4.9.5 |
bootpAddress(Router mode only) The IP Address of the BOOTP/DHCP
server. Format: xxx.xxx.xxx.xxx .rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.9.6 |
bootpDelaySecs(Bridge mode or Router Mode) The age in seconds of
a BOOTP/DHCP message after which the bridge or relay
starts doing anything. Zero means no delay.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.9.7 |
dhcpProxyActiveTRUE if the DHCP proxy is enabled. If set, then DHCP Relay
and DHCP Server will be silent disabled.rw Enumeration .1.3.6.1.4.1.559.1.2.3.4.9.8 |
referenceAddress(Router mode only) The refernece IP Address (giaddr) for the
pool. Format: xxx.xxx.xxx.xxx .rw IpAddress .1.3.6.1.4.1.559.1.2.3.4.9.9 |
minPoolSizeThe minimum number of addresses in the pool.rw INTEGER .1.3.6.1.4.1.559.1.2.3.4.9.10 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.4 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.4.1 |
alarmCodeError code for reported Alarm trap event.ro Enumeration .1.3.6.1.4.1.559.1.2.4.1.1 |
alarmTextExplanatory text describing the event which caused
the Alarm trap to be generated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.4.1.2 |
isdnFailCause OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.4.2 |
isdnFailDestinationContainins the ISDN destination dialled to cause
the call to failro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.4.2.1 |
q931FailCauseCodeContains the cause of a failed Q931 ISDN callro Enumeration .1.3.6.1.4.1.559.1.2.4.2.2 |
dass2FailCauseCodeContains the cause of a failed DASS2 ISDN callro Enumeration .1.3.6.1.4.1.559.1.2.4.2.3 |
briFailCauseCodeContains the cause of a failed DASS2 ISDN callro INTEGER .1.3.6.1.4.1.559.1.2.4.2.4 |
radius OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.4.3 |
radiusReplyCodeContains the result of a call to RADIUS.ro Enumeration .1.3.6.1.4.1.559.1.2.4.3.1 |
radiusUsernameThis is the username authenticated by RADIUS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.4.3.2 |
login OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.4.4 |
loginCodeContains the result of a login after no RADIUS
server can be found.ro Enumeration .1.3.6.1.4.1.559.1.2.4.4.1 |
registration OBJECT IDENTIFIER .1.3.6.1.4.1.559.2 |
regArpeggio OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10 |
arpStandard OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.1 |
arpFocus OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.2 |
arpOffice OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.3 |
arpPlus OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.4 |
arpMultiLan OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.5 |
arpLite OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.6 |
arpPlusRPrimary OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.7 |
arpPlusRBasic OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.10.8 |
officeConnect OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13 |
officeConnectRemote510s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.1 |
officeConnectRemote520s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.2 |
officeConnectRemote530s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.3 |
officeConnectRemote510u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.4 |
officeConnectRemote520u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.5 |
officeConnectRemote530u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.6 |
officeConnectRemote531s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.7 |
officeConnectRemote531u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.13.8 |
accessBuilder OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14 |
accessBuilderRemoteUser400s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.1 |
accessBuilderRemoteUser400u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.2 |
accessBuilderInternet400s OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.3 |
accessBuilderInternet400u OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.4 |
accessBuilderRemoteOffice500 OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.5 |
accessBuilderRemoteOffice600 OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.6 |
accessBuilderRemoteOffice700 OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.7 |
accessBuilder7000BriBridgeRouter OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.8 |
accessBuilder7000PriBridgeRouter OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.14.9 |
serviceConnect2000 OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.15 |
serviceConnect2000Base OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.15.1 |
serviceConnect2000BaseBri OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.15.1.1 |
serviceConnect2000BasePri OBJECT IDENTIFIER .1.3.6.1.4.1.559.2.15.1.2 |
cscmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.559.3 |
cscmEventNumberContains the CSCM event numberro Enumeration .1.3.6.1.4.1.559.3.1 |
cscmOriginatingIPThis is the IP address of the unit that caused the
trap to be generated by CSCMro IpAddress .1.3.6.1.4.1.559.3.2 |
cscmTrapDetailThis is the IP address of the unit that caused the
trap to be generated by CSCMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.3.3 |