CTRON-BDG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-BDG-MIB.
157
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
lmcommon OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.1 |
mAC OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2 |
ieee8023 OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1 |
pcIF OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1 |
pcIfRev OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1.1 |
pcDeviceNameName of the PC devicero OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.1 |
pcBoardTypeAn object Identifier that indicates the type of the PC
board. This will include MAC type and Media type.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1.1.2 |
pcOwnerNameThe owner of this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.3 |
pcLocationA text description of the location of this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.4 |
pcMMACAddrThe MAC address of the MMAC that this PC is connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.5 |
pcMMACBoardThe slot number of the board in the MMAC that this PC is
connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.6 |
pcMMACPortThe number of the port on the board of the MMAC that this
PC is connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.7 |
pcApplicationA text description of the network application running on
this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.8 |
pcDriverRevThe revision of the LAN card driver.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.9 |
pcOnboardMemoryThe number of Kilobytes of memory (eg. a 16K board would
reply 16)ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.10 |
pcCommentA user-defined character string.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.11 |
pcMACAddrThe MAC address of the PC card.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.12 |
pcFramesXmitThe number of MAC frames transmitted by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.13 |
pcBytesXmitThe number bytes transmitted by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.14 |
pcMcastXmitThe number of multicasted frames sent by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.15 |
pcBcastXmitThe number of broadcast frames from this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.16 |
pcDeferXmitThe number of transmit packets that were deferred due to
busy media.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.17 |
pcSglCollThe number of transmit packet experiencing a single
collision.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.18 |
pcMultiCollThe number of transmit packets that have experienced
multiple collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.19 |
pcTotXmitErrsThe total number of transmit errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.20 |
pcLateCollsThe number of transmit packets that experienced late
collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.21 |
pcXcessCollsThe number of transmit packets aborted due to excess
collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.22 |
pcCarrErrThe number of transmit packets that experience carrier
sense errors (ie. lose carrier during transmission).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.23 |
pcFramesRecThe number of frames received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.24 |
pcBytesRecThe number of bytes received by this station.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.25 |
pcMcastRecThe number of multicasted frames received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.26 |
pcBcastRecThe number of broadcast packets received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.27 |
pcTotRecErrsThe total number of receive errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.28 |
pcTooLongThe number of packets received that are too long (over 1518
bytes).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.29 |
pcTooShortThe number of packets that are too short. (under 64 bytes
long).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.30 |
pcAlignErrsThe number of alignment errors in receive packets.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.31 |
pcCRCErrsThe number of receive packets with CRC errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.32 |
pcLenErrsThe number of packets whose length is not equal to the
number of bytes received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.33 |
pcIntRecErrThe number of receive packets that experienced internal
errors (eg. no receive buffers).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.34 |
pcSqeErrThe number of SQE errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.35 |
bridgeRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1 |
IMPORTS Unknown .1.3.6.1.4.1.559.1.2.3.1 |
bdgdevice OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.1 |
bdgdeviceDisableBdgIndicates if the bridge will be disabled.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.1 |
bdgdeviceRestoreSettingsRestore the following settings to their default values:
Bridge Name to ETHERNET_BRIDGE,
Location to LOCAL,
Port 1 Name to PORT_1,
Port 2 Name to PORT_2,
Port 1 Network Name to LAN_1,
Port 2 Network Name to LAN_2,
Ageing Time for Acquired Database to 300 seconds,
Erase the acquired database,
Erase the permanent database,
Place sixteen default multicast addresses into
the permanent and acquired databases,
Type of Spanning Tree to 802.1,
Type of Filtering to IEEE 802.1,
Bridge Max Age to 20 seconds,
Bridge Forward Delay to 15 seconds,
Bridge Hello Time to 2 seconds,
Bridge Priority to 8000,
Port 1 Priority to 80,
Port 2 Priority to 80,
Port 1 Path Cost to 100,
Port 2 Path Cost to 100,
Restart the bridge.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.2 |
bdgdeviceBdgNameThe user-defined name (up to 32 characters long) of the bridge.
The default bridge name is ETHERNET_BRIDGE.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.4 |
bdgdeviceNumPortsThe number of ports present on the bridge.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.5 |
bdgdeviceTypeThe type of bridge, NB25E, IRBM, or NB20E.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.6 |
bdgdeviceVersionThe release version of the firmware installed in the bridge.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.7 |
bdgdeviceLocationThe user-defined name to indicate the location of the bridge on
the network. The default location name is LOCAL.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.8 |
bdgdeviceStatusThe status of the bridge, ON-LINE, STAND BY or DISABLED.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.9 |
bdgdeviceRestartBdgForce the bridge to undergo a software reset.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.10 |
bdgdeviceFrFwdThe number of frames forwarded by the bridge.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.11 |
bdgdeviceFrRxThe number of frames received by the bridge.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.12 |
bdgdeviceFrFltThe number of frames filtered by the bridge.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.13 |
bdgdeviceErrThe total number of network errors that have occurred.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.14 |
bdgdeviceSwitchSettingIndicates the current switch settings read from the bridge
hardware.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.15 |
bdgdeviceNumRestartsThe number of times the bridge has been powered up or restarted.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.16 |
bdgdeviceTypeFilteringThe type of filtering to be performed by the bridge. The default
is IEEE 802.1.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.17 |
bdgdeviceSTAProtocolThe spanning tree algorithm under which the bridge is operating.
The selections are as follows:
- IEEE 802.1 compliant spanning tree algorithm
environment (802.1)
- DEC LAN Bridge 100 environment (DEC)
- Without the spanning tree algorithm enabled (NONE)
The default is 802.1.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.18 |
bdgdeviceBridgeIDThe unique identifier of the bridge. The first two bytes of the
identifier are the bridge priority and the last six bytes are the
Ethernet address.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.19 |
bdgdeviceTopChgCntThe number of times the bridge's Topology Change Flag has been
changed since the bridge was powered up or initialized.ro Counter .1.3.6.1.4.1.559.1.2.3.1.1.20 |
bdgdeviceRootCostThe cost of the path to the root from this bridge.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.21 |
bdgdeviceRootPortThe port identifier for the port which offers the lowest cost
path to the root, i.e. that port for which the sum of the values
of the designated cost and path cost parameters held for the port
is lowest.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.22 |
bdgdeviceHelloTimeThe time interval between the transmission of Configuration
BPDU's by a bridge which is attempting to become the root or is
the root.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.23 |
bdgdeviceBdgMaxAgeThe value of the Max Age parameter when the bridge is the root
or is attempting to become the root. A time of 6 to 40 seconds is
allowed. The default is 20 seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.24 |
bdgdeviceBdgFwdDlyThe value of the forward delay parameter when the bridge is the
root or is attempting to become the root. A time of 4 to 30
seconds is allowed.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.25 |
bdgdeviceTimeTopChgThe time in seconds that has elapsed since the bridge's Topology
Change Flag last recorded the value of a topology change.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.26 |
bdgdeviceTopChgIndicates if a bridge topology change is in progress.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.27 |
bdgdeviceDesigRootThe unique identifier of the bridge recorded as the root.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.1.28 |
bdgdeviceMaxAgeThe maximum age of received protocol information before it is
discarded.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.29 |
bdgdeviceHoldTimeThe minimum time period elapsing between the transmission of
configuration BPDU's through a given bridge port.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.30 |
bdgdeviceFwdDlyThe time spent in the listening state while moving from the
blocking state to the learning state, or the time spent in the
learning state while moving from the listening state to the
forwarding state.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.31 |
bdgdeviceBdgHelloThe value of the Hello Time parameter when the bridge is the
root or is attempting to become the root. A time of 1 to 10
seconds is allowed. The default is 2 seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.32 |
bdgdeviceBdgPriorityThe part of the bridge address that contains the identifier used
in the spanning tree for priority comparisons. Allowed range is 0
through FFFF. The default is 8000.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.33 |
bdgdeviceResetCountsReset all counters to zero.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.1.34 |
bdgdeviceUptimeThe time, in seconds, that has elapsed since the bridge was last
reset or initialized.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.1.35 |
bdgdeviceTrapTypeContains the object identifier of the first VarBinding in the
last trap generated by the bridge.ro OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.1.36 |
bdgPort OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.2 |
bdgPortAddressThe Ethernet address of the port.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.1 |
bdgPortNameThe user-defined name assigned to the port. The default port 1
name is PORT_1 and the default Port 2 name is PORT_2.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.2 |
bdgPortTypeThe IEEE specification the port meets, e.g. 802.3.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.3 |
bdgPortStatusThe status in which the port is operating. The status messages
for Ports 1 and 2 are:
OFF - The port is off, due to a failed network interface
chip associated with that port.
OK/SQE ON - The port is communicating with the network
and the transceiver making the connection to the network
has SQE enabled.
OK/SQE OFF - The port is communicating with the network
and the transceiver making the connection to the network
has SQE disabled.
CARRIER LOST - Communication with the network has not
been established or has been lost.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.4 |
bdgPortNetNameThe user-defined name assigned to a network segment connected to
the port. The default network name for Port 1 is LAN_1 and the
default network name for Port 2 is LAN_2.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.5 |
bdgPortFrRxThe number of frames received at the specified port.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.6 |
bdgPortDisInbThe total number of valid frames that were received at the port
but then discarded by the bridge in the forwarding process.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.7 |
bdgPortFwdOutbThe number of frames forwarded successfully to the appropriate
port.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.8 |
bdgPortDisLOBThe number of packets that were discarded by the bridge because
of a lack of buffer space to maintain the data.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.9 |
bdgPortDisTDEThe number of frames that were intended for forwarding but were
discarded when the maximum time period set for transmission was
exceeded before forwarding was possible.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.10 |
bdgPortDisErrThe number of frames that could not be transmitted because the
frame was too large for the attached network (1526 bytes,
including preamble, for 802.3 networks).ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.11 |
bdgPortCollThe number of collisions that have occurred on the network at
the specified port.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.12 |
bdgPortTxAbrtThe number of transmissions that have been aborted due to
excessive collisions (over 16 attempts to transmit the same
packet).ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.13 |
bdgPortOowCollThe number of collisions out of the standard collision window
(51.2 uS). This indicates a network problem.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.14 |
bdgPortCRCErrThe number of packets detected with Cyclical Redundancy Check
failures.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.15 |
bdgPortFrAlErrThe number of errors due to misaligned packets.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.16 |
bdgPortPriorityThe part of the port identifier which is used with the spanning
tree algorithm when determining which port in a LAN segment has
priority. The default is 80.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.2.17 |
bdgPortStateThe current state of the port, DISABLED, LISTENING, LEARNING,
FORWARDING or BLOCKING.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.18 |
bdgPortPathCostThe contributory cost of the applicable port to the overall cost
of the path when the specified port is the root port. Allowable
range is 1 to 65535. The default is 100.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.2.19 |
bdgPortDesigCostThe cost of the path of this port to the root bridge on the
network.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.2.20 |
bdgPortDesigBrdgThe network address of the bridge that is assumed to be the root
bridge on the network.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.21 |
bdgPortDesigPortThe port identifier of the bridge port believed to be the
designated port for the LAN associated with the port.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.2.22 |
bdgPortTopChgAckThe value of the topology change acknowledgement flag in the
next configuration BPDU to be transmitted on the associated port.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.2.23 |
bdgPortDesigRootThe unique bridge identifier of the bridge that is assumed to be
the root bridge on the network.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.2.24 |
bdgPortRuntPacketsThe number of packets received at the indicated bdgPort that were
less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.25 |
bdgPortOversizePacketsThe number of packets received at the indicated port that were
greater than the IEEE 802.3 maximum Ethernet frame size of 1518
bytes.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.26 |
bdgPortFrFiltThe number of frames received at the indicated port that were
filtered by the bridge.ro Counter .1.3.6.1.4.1.559.1.2.3.1.2.27 |
filterDB OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3 |
acqDB OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.1 |
acqStats OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.1.1 |
acqTotalEntriesThe total number of entries in the acquired database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.1 |
acqMaxEntriesThe maximum number of entries allowed in the acquired database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.2 |
acqStaticEntriesThe number of addresses added to the Acquired database by the
user or network manager.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.3 |
acqStaticAgeTimeThe length of time allowed for a static entry in the Acquired
database to be inactive before it is dropped from the database.
This time is fixed at zero.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.4 |
acqDynEntriesThe number of entries that have been accumulated in the Acquired
database through the bridge's learning process.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.5 |
acqDynAgeTimeThe length of time allowed for a dynamic entry in the acquired
database to be inactive before it is dropped from the database. A
time from 10 - 1,000,000 seconds is allowed. The default is 300
seconds.rw INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.1.1.6 |
acqEraseDatabaseSet to zero to erase all entries in the acquired database.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.1.7 |
acqOptions OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.1.2 |
acqCreate00Add an entry to the acquired database to filter packets entering
ports 1 and 2 if those packets are destined for the specified
address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.1 |
acqCreate20Add an entry to the acquired database to forward packets
entering port1 to port2 and filter packets entering port2 if
those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.2 |
acqCreate01Add an entry to the acquired database to filter packets entering
port 1 and forward packets entering port 2 to port 1 if those
packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.3 |
acqCreate21Add an entry to the acquired database to forward packets
entering port 1 to port 2 and to forward packets entering port 2
to port 1 if those packets are destined for the specified
address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.4 |
acqDeleteDelete an entry from the acquired database.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.5 |
acqDispTypeDisplay the entry type, STATIC or DYNAMIC.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.1.2.6 |
acqDispOutp1The outbound port for packets entering port 1.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.7 |
acqDispOutp2The outbound port for packets entering port 2.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.1.2.8 |
acqSrcAddressThe source address of this acquired database entry, i.e. the
instance.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.1.2.9 |
permDB OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.2 |
permStats OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.2.1 |
permMaxEntriesThe maximum number of entries allowed in the permanent database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.2.1.1 |
permCurrEntriesThe number of entries currently recorded in the bridge's
permanent database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.2.1.2 |
permEraseDatabaseErase all entries in the permanent database.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.1.3 |
permOptions OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.2.2 |
permCreate00Add an entry to the permanent database to filter packets
entering ports 1 and 2 if those packets are destined for the
specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.1 |
permCreate20Add an entry to the permanent database to forward packets
entering port 1 and filter packets entering port 2 if those
packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.2 |
permCreate01Add an entry to the permanent database to filter packets
entering port 1 and forward packets entering port 2 if those
packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.3 |
permCreate21Add an entry to the permanent database to forward packets
entering ports 1 and 2 if those packets are destined for the
specified address.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.4 |
permDeleteDelete an entry from the permanent database.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.5 |
permDispTypeDisplay the entry type, STATIC or DYNAMIC.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.2.2.6 |
permDispOutp1The outbound port for packets entering port 1.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.7 |
permDispOutp2The outbound port for packets entering port 2.ro Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.2.2.8 |
permSrcAddressThe source address in this permanent database entry, i.e. the
instance.ro OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.2.2.9 |
specialDB OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.3 |
specStats OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.3.1 |
specNumEntriesThe number of filters in the special database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.3.1.1 |
specMaxEntriesThe maximum number of filters the special database can contain.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.3.1.2 |
specNextFilterNumThe number of the next available filter that can be added to the
special database.ro INTEGER .1.3.6.1.4.1.559.1.2.3.1.3.3.1.3 |
specFilters OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.3.3.2 |
specEnableEnable or disable the filter.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.3.2.1 |
specPort1Set port 1 to filter or forward packets.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.3.2.2 |
specPort2Set port 2 to filter or forward packets.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.3.2.3 |
specDestAddressSet the special database to filter packets with a specific
destination address.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.3.2.4 |
specSrcAddressSet the special database to filter packets with a specific
source address.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.3.2.5 |
specTypeSet the special database to filter packets with a specific type
field.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.3.2.6 |
specDataFieldSet the special database to filter packets based on the first
sixteen bytes of data in the packet.rw OCTET STRING .1.3.6.1.4.1.559.1.2.3.1.3.3.2.7 |
specDeleteFilterDelete a filter from the special database.rw Enumeration .1.3.6.1.4.1.559.1.2.3.1.3.3.2.8 |
trapTypes OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.4 |
bdgTables OBJECT IDENTIFIER .1.3.6.1.4.1.559.1.2.3.1.5 |