XYLO-NTP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
28 total| Object Name |
|---|
RFC1155-SMIEnable/Disable NTPrw Unknown .1.3.6.1.4.1.25651.1.2.2.18.1 |
ntpModeset the mode of NTP on annex. Only unicast client mode is supported in the current releaserw Enumeration .1.3.6.1.4.1.25651.1.2.2.18.2 |
ntpStateThe current state of NTPro Enumeration .1.3.6.1.4.1.25651.1.2.2.18.3 |
ntpVersionThe NTP version on the RAC NTP client softwarero INTEGER .1.3.6.1.4.1.25651.1.2.2.18.4 |
ntpStratumRAC NTP client software stratumro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.5 |
ntpRootDelayDelay from synchronization serverro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.6 |
ntpReferenceIdReference ID of time synchronization sourcero IpAddress .1.3.6.1.4.1.25651.1.2.2.18.7 |
ntpLeapHappenedFlag indicating whether leap occurred or not
leap: a leap second is added / subtracted from the
last second of a particular day for e.g. the time of
a particular day will end with 23:59:60 instead of
23:59:59. This is done to conform with universal
standard time conventionsro Enumeration .1.3.6.1.4.1.25651.1.2.2.18.8 |
ntpLeapTimeNext leap adjustment in 1/100 secondro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25651.1.2.2.18.9 |
ntpPeerTableThe list of configured NTP Peers/Servers SEQUENCE OF NtpPeerEntry .1.3.6.1.4.1.25651.1.2.2.18.10 |
ntpPeerEntryAn NTP peer description NtpPeerEntry .1.3.6.1.4.1.25651.1.2.2.18.10.1 |
ntpPeerIndexNumberIndex numberro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.1 |
ntpPeerStateState of Peerro Gauge .1.3.6.1.4.1.25651.1.2.2.18.10.1.2 |
ntpConfigPeerModePeer configured as peer or serverrw Enumeration .1.3.6.1.4.1.25651.1.2.2.18.10.1.3 |
ntpPeerModeThe peer mode of operationro Enumeration .1.3.6.1.4.1.25651.1.2.2.18.10.1.4 |
ntpPeerHostModeRAC NTP moderw Enumeration .1.3.6.1.4.1.25651.1.2.2.18.10.1.5 |
ntpPeerIpAddressIP address of Peerro IpAddress .1.3.6.1.4.1.25651.1.2.2.18.10.1.6 |
ntpSourceIpAddressSource IP address of Peerrw IpAddress .1.3.6.1.4.1.25651.1.2.2.18.10.1.7 |
ntpPeerPrefPeer preference:not usedrw INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.8 |
ntpPeerRefIdPeer Reference clock IP Addressro IpAddress .1.3.6.1.4.1.25651.1.2.2.18.10.1.9 |
ntpPeerVersionPeer NTP version numberro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.10 |
ntpPeerPrecisionPeer Clock precisionro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.11 |
ntpPeerStratumPeer stratumro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.12 |
ntpPeerRootDelayDelay from Synchronization clock in secondsro INTEGER .1.3.6.1.4.1.25651.1.2.2.18.10.1.13 |
ntpPeerDispersionPeer clock dispersionro Gauge .1.3.6.1.4.1.25651.1.2.2.18.10.1.14 |
ntpPeerOffsetPeer clock offsetro Gauge .1.3.6.1.4.1.25651.1.2.2.18.10.1.15 |
ntpPeerPollsNumber of times this peer has been polledro Counter .1.3.6.1.4.1.25651.1.2.2.18.10.1.16 |
ntpPeerFramesReceivedNumber of frames this peer has receivedro Counter .1.3.6.1.4.1.25651.1.2.2.18.10.1.17 |
More MIBs from Exaltcommunications
Browse all ExaltcommunicationsMIBs →The ExaltComProducts MIB module facilitates the monitoring and management of ExaltCom hardware appliances, specifically exposing operational metrics such as interface status, traffic counters, system resource utilization, and device health indicators via SNMP.
Standard SNMP MIB module defining data structures for ExaltComm.
SNMP MIB module
The DHCP-V4-RELAY-MIB enables monitoring and management of IPv4 DHCP relay agent interfaces, tracking relay statistics such as packet counts, drop rates, and agent circuit ID configurations. It provides visibility into the operational state of BOOTP/DHCP relay processes, including interface status, message forwarding metrics, and agent discovery parameters.
Standard SNMP MIB module defining data structures for ETHERNET-MIB.
Standard SNMP MIB module defining data structures for ExaltComm-TRAPS-MIB.