ETHERNET-MIB
Standard SNMP MIB module defining data structures for ETHERNET-MIB.
Imported Objects
Objects
22 total| Object Name |
|---|
ethernetEthernet interfaces. OBJECT IDENTIFIER .1.3.6.1.4.1.25651.1.2.3.2.1 |
ethernetNumChannelsThe maximum number of available ethernet channels.ro Gauge32 UNITS "channels" .1.3.6.1.4.1.25651.1.2.3.2.1.3 |
ethernetInterfacesAttributes for ethernet ports. SEQUENCE OF EthernetPortEntry .1.3.6.1.4.1.25651.1.2.3.2.1.4 |
ethernetInterfaceAn entry in the Ethernet table. EthernetPortEntry .1.3.6.1.4.1.25651.1.2.3.2.1.4.1 |
functionEthernet port function.rw EthernetFunctionT .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.1 |
modeEthernet mode .rw EthernetModeT .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.2 |
alarmEthernet port alarm.rw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.3 |
muteEthernet can be muted, when there is a system/ethernet alarm. When MHS is enabled, the ethernet mute is termed as 'Auto', setting a value as 2, when MHS disabled, the value is restoredrw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.4 |
rateConfigEthernet rate limit status, default is disabledrw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.5 |
rateTypeEthernet rate limit type, default is KBPSrw EthRateLimitTypeT .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.6 |
rateLimitEthernet rate limit type default is 64KBPSrw EthRateLimitValueT .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.7 |
dhcpDHCP (Enable/Disable) on port.rw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.4.1.8 |
ethernetLearningEtherner Learning (Enable/Disable) on the switchrw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.5 |
ethernetMgmtEtherner Management Type (Inband/Out-of-Band/Port-to-Port/Legacy) for the switchrw EthernetMgmtTypeT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.6 |
ethernetFlowControlEtherner Flow Control (Disable/Enable) on the switchrw EnableStatusT (ExaltComm) .1.3.6.1.4.1.25651.1.2.3.2.1.7 |
commitEthernetSettingsThe Commit ethernet command.rw DisplayString .1.3.6.1.4.1.25651.1.2.3.2.1.1000 |
locETHAlarmsThe Local Ethernet Interface Alarms. SEQUENCE OF LocalEthAlarmsEntry .1.3.6.1.4.1.25651.1.2.4.2.3.2.1 |
locEthAlarmsEntryEthernet Alarms table Entry. LocalEthAlarmsEntry .1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1 |
locEthAlarmThe Alarms state for the Local Ethernet Channel.ro AlarmLevelT (ExaltComm) .1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1.1 |
remETHAlarmsThe Local Ethernet Interface Alarms. SEQUENCE OF RemoteEthAlarmsEntry .1.3.6.1.4.1.25651.1.2.4.2.4.2.1 |
remEthAlarmsEntryEthernet Alarms table Entry. RemoteEthAlarmsEntry .1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1 |
remEthAlarmThe Alarms state for the Remote Ethernet Channel.ro AlarmLevelT (ExaltComm) .1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1.1 |
More MIBs from Exaltcommunications
Browse all ExaltcommunicationsMIBs →The ExaltComProducts MIB module facilitates the monitoring and management of ExaltCom hardware appliances, specifically exposing operational metrics such as interface status, traffic counters, system resource utilization, and device health indicators via SNMP.
Standard SNMP MIB module defining data structures for ExaltComm.
SNMP MIB module
The DHCP-V4-RELAY-MIB enables monitoring and management of IPv4 DHCP relay agent interfaces, tracking relay statistics such as packet counts, drop rates, and agent circuit ID configurations. It provides visibility into the operational state of BOOTP/DHCP relay processes, including interface status, message forwarding metrics, and agent discovery parameters.
SNMP MIB module
Standard SNMP MIB module defining data structures for ExaltComm-TRAPS-MIB.