XYLAN-SOFT-PVC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-SOFT-PVC-MIB.
106
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
atmxSoftPvcMIB OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2 |
RFC-1215 Unknown .1.3.6.1.4.1.800.2.9.2 |
atmxSoftPvcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.1 |
atmxSoftPvcBaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.1.1 |
atmxSoftPvcCallFailuresTrapEnableAllows the generation of traps in response to call
failures. By default, this object is set to 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.1.1 |
atmxSoftPvcCallFailuresThe number of times a series of call attempts has failed to
establish a Soft PVCC or Soft PVPC. The number of call
attempts in a series is determined by
atmSoftPVccRetryThreshold or atmSoftPVpcRetryThreshold,
respectively.ro Counter .1.3.6.1.4.1.800.2.9.2.1.1.2 |
atmxSoftPvcCurrentlyFailingSoftPVccsThe current number of Soft PVCCs for which there is
an active row in the atmSoftPVccTable having an
atmSoftPVccOperStatus with a value other than 'connected'.ro Gauge32 .1.3.6.1.4.1.800.2.9.2.1.1.3 |
atmxSoftPvcCurrentlyFailingSoftPVpcsThe current number of Soft PVPCs for which there is an
active row in the atmSoftPVpcTable having an
atmSoftPVpcOperStatus with a value other than 'connected'.ro Gauge32 .1.3.6.1.4.1.800.2.9.2.1.1.4 |
atmxSoftPvcNotificationIntervalThe minimum interval between the sending
of atmSoftPvcCallFailuresTrap notifications.rw INTEGER -- UNITS seconds .1.3.6.1.4.1.800.2.9.2.1.1.5 |
atmxCurrentlyFailingSoftPVccTableA table indicating all Soft Permanent Virtual Channel
Connections (Soft PVCCs) for which the atmSoftPVccRowStatus
is 'active' and the atmSoftPVccOperStatus is other than
'connected'. SEQUENCE OF AtmxCurrentlyFailingSoftPVccEntry .1.3.6.1.4.1.800.2.9.2.1.2 |
atmxCurrentlyFailingSoftPVccEntryEach entry in this table represents a Soft Permanent
Virtual Channel Connection (Soft PVCC) for which the
atmSoftPVccRowStatus is 'active' and the
atmSoftPVccOperStatus is other than 'connected'. AtmxCurrentlyFailingSoftPVccEntry .1.3.6.1.4.1.800.2.9.2.1.2.1 |
atmxCurrentlyFailingSoftPVccSlotIndexThe slot instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.2.1.1 |
atmxCurrentlyFailingSoftPVccPortIndexThe port instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.2.1.2 |
atmxCurrentlyFailingSoftPVccVpiThe vpi instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.2.1.3 |
atmxCurrentlyFailingSoftPVccVciThe vci instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.2.1.4 |
atmxCurrentlyFailingSoftPVccLeafReferenceThe leaf reference INTEGER .1.3.6.1.4.1.800.2.9.2.1.2.1.5 |
atmxCurrentlyFailingSoftPVccTimeStampThe time at which this Soft PVCC began to fail.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.2.1.6 |
atmxCurrentlyFailingSoftPVpcTableA table indicating all Soft Permanent Virtual Path
Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus
is 'active' and the atmSoftPVpcOperStatus is other than
'connected'. SEQUENCE OF AtmxCurrentlyFailingSoftPVpcEntry .1.3.6.1.4.1.800.2.9.2.1.3 |
atmxCurrentlyFailingSoftPVpcEntryEach entry in this table represents a Soft Permanent
Virtual Path Connection (Soft PVPC) for which the
atmSoftPVpcRowStatus is 'active' and the
atmSoftPVpcOperStatus is other than 'connected'. AtmxCurrentlyFailingSoftPVpcEntry .1.3.6.1.4.1.800.2.9.2.1.3.1 |
atmxCurrentlyFailingSoftPVpcSlotIndexThe slot instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.3.1.1 |
atmxCurrentlyFailingSoftPVpcPortIndexThe port instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.3.1.2 |
atmxCurrentlyFailingSoftPVpcVpiThe vpi instance INTEGER .1.3.6.1.4.1.800.2.9.2.1.3.1.3 |
atmxCurrentlyFailingSoftPVpcLeafReferenceThe leaf reference INTEGER .1.3.6.1.4.1.800.2.9.2.1.3.1.4 |
atmxCurrentlyFailingSoftPVpcTimeStampThe time at which this Soft PVPC began to fail.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.3.1.5 |
xylnatmSoftPVpcTableThe (conceptual) table used to manage Soft
Permanent Virtual Path Connections (Soft PVPCs)
The Soft PVPC table is applicable only to switches. SEQUENCE OF XylnatmSoftPVpcEntry .1.3.6.1.4.1.800.2.9.2.1.4 |
xylnatmSoftPVpcEntryEach entry in this table represents a Soft
Permanent Virtual Path Connection (Soft PVPC)
originating at a switch interface.
A Soft PVPC is a VPC that is:
- provisioned at the originating (source)
interface of the connection
- established by signalling procedures
across a network to a destination interface.
When a row is made active, an attempt is made
to set up a switched connection to an interface at
the destination switch. No objects (other than
atmSoftPVpcRowStatus) can be set while the row is
active.
At the destination, the VPL may be defined (but
not cross-connected) prior to arrival of the Setup
request.
The combination of slot/port, atmVplVpi specified
in the index clause of this entry serves to
identify the VPL on the source interface. The
atmSoftPVpcLeafReference object aids in distinguishing
between leaves of a point-to-multipoint Soft PVPC. XylnatmSoftPVpcEntry .1.3.6.1.4.1.800.2.9.2.1.4.1 |
xylnatmSoftPVpcSlotIndexThe slot index for this vpcro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.1 |
xylnatmSoftPVpcPortIndexThe port numberro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.2 |
xylnatmSoftPVpcVpiThe VPI value of the VPL used at the
in interface.ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.3 |
xylnatmSoftPVpcLeafReferenceThe leaf reference for this Vplro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.4 |
xylnatmSoftPVpcTargetAddressThe target ATM Address of this Soft PVPC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.4.1.5 |
xylnatmSoftPVpcTargetSelectTypeIndicates whether the target VPI value
is to be used at the destination.
If the value 'any' is specified, the
destination switch will choose the VPI
value. In such a case, once the Soft PVPC
atmSoftPVpcOperStatus value is 'connected',
the value of this object changes to 'required',
such that the same VPI value will continue to
be used even if the connection is subsequently
torn down and re-established. The VPI value
chosen will be available for reading in
atmSoftPVpcTargetVpi.
If the value 'required' is specified, then
a value must be supplied for object
atmSoftPVpcTargetVpi prior to activation
of the row. This value is then to be used
at the destination.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.4.1.6 |
xylnatmSoftPVpcTargetVpiThe VPI value of the VPL used at the
target interface.
This value must be filled in when the
atmSoftPVpcTargetSelectType is set to 'required'.
This value is not relevant when the value of
atmSoftPVpcTargetSelectType is 'any'.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.7 |
xylnatmSoftPVpcLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVPC.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.8 |
xylnatmSoftPVpcLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVPC.ro OCTET STRING .1.3.6.1.4.1.800.2.9.2.1.4.1.9 |
xylnatmSoftPVpcOperStatusDescribes the status of the Soft PVPC. When the
row is not 'active', the value of this
object is 'other'.ro Enumeration .1.3.6.1.4.1.800.2.9.2.1.4.1.10 |
xylnatmSoftPVpcRestartWhen the value is set to 'restart', the Soft PVPC is
released if necessary and a new setup procedure is begun.
As a result of this action, the atmSoftPVpcOperStatus
object transitions to 'establishmentInProgress' (if not
already in this state) and the atmSoftPVpcRetryFailures
object is cleared.
When the value is set to 'noop', no operation is performed.
When read, the value 'noop' is returned.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.4.1.11 |
xylnatmSoftPVpcRetryIntervalDefines the period to wait before attempting
to establish the Soft PVPC connection after the first
failed call attempt. Zero represents an infinite
interval indicating no retries.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.12 |
xylnatmSoftPVpcRetryTimerIndicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the Soft PVPC. When the
timer is not running, the value zero shall be returned.ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.13 |
xylnatmSoftPVpcRetryThresholdIndicates the number of consecutive call setup attempts for
the same Soft PVPC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicates that an infinite number of call attempts
are required to increment the atmSoftPvcCallFailures object
and thus disables alarms for the Soft PVPC.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.14 |
xylnatmSoftPVpcRetryFailuresIndicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVPC is restarted.ro Gauge32 .1.3.6.1.4.1.800.2.9.2.1.4.1.15 |
xylnatmSoftPVpcRetryLimitSets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. setting
atmSoftPVpcRestart to 'restart') to initiate a new attempt
to establish the connection. A value of zero indicates no
limit - the attempts will continue until successful.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.16 |
xylnatmSoftPVpcLowTDIndexThe low end Traffic Descriptor ..refer rfc1695 for detailsrw AtmxTrafficDescrParamIndex .1.3.6.1.4.1.800.2.9.2.1.4.1.17 |
xylnatmSoftPVpcHighTDIndexThe high end of the TDrw AtmxTrafficDescrParamIndex .1.3.6.1.4.1.800.2.9.2.1.4.1.18 |
xylnatmSoftPVpcLastChangeThe value of MIB II sysUptime object at the time this VPL entered
its current op state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.4.1.19 |
xylnatmSoftPVpcOutSlotThe outgoing slot once the connection is established..else its 0ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.20 |
xylnatmSoftPVpcOutPortThe out going slot if the connection is established..else its 0ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.21 |
xylnatmSoftPVpcOutVpiThe outgoing vpi if established..else 0ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.22 |
xylnatmSoftPVpcAdminStatusThe admin status of the VPLrw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.23 |
xylnatmSoftPVpcCrossConnectIdentifierA unique non-zero value if the VPL is exiting the switch apart
from the inputro INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.24 |
xylnatmSoftPVpcBbcIndexThe BBC Index from the BBC Tablerw INTEGER .1.3.6.1.4.1.800.2.9.2.1.4.1.25 |
xylnatmSoftPVpcRowStatusUsed to create and delete a Soft PVPC.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.4.1.26 |
xylnatmSoftPVccTableThe (conceptual) table used to manage Soft
Permanent Virtual Channel Connections (Soft PVCCs).
The Soft PVCC table is applicable only to switches. SEQUENCE OF XylnatmSoftPVccEntry .1.3.6.1.4.1.800.2.9.2.1.5 |
xylnatmSoftPVccEntryEach entry in this table represents a Soft
Permanent Virtual Channel Connection (Soft PVCC)
originating at a switch interface.
When a row is made active, an attempt is made
to set up a switched connection to an interface at
the destination switch. No objects (other than
atmSoftPVccRowStatus) can be set while the row is
active.
At the destination, the VCL may be defined (but
not cross-connected) prior to arrival of the Setup
request.
The combination of Slot/Port, atmVclVpi, and atmVclVci
specified in the index clause of this entry serves to
identify the VCL on the source interface. The
atmSoftPVccLeafReference object aids in distinguishing
between leaves of a point-to-multipoint Soft PVCC. XylnatmSoftPVccEntry .1.3.6.1.4.1.800.2.9.2.1.5.1 |
xylnatmSoftPVccSlotIndexSlot Instancero INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.1 |
xylnatmSoftPVccPortIndexPort Instancero INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.2 |
xylnatmSoftPVccVpiVpi instancero INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.3 |
xylnatmSoftPVccVciVcl instancero INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.4 |
xylnatmSoftPVccLeafReferenceAn arbitrary integer which, in the case of the
source VCL having an atmVclCastType of
'p2mpRoot', serves to distinguish between the
multiple leaves attached to a root of a
point-to-multipoint Soft PVCC. If the atmVclCastType
is not 'p2mpRoot' the value 1 shall be used.ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.5 |
xylnatmSoftPVccTargetAddressThe target ATM Address of this Soft PVCC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.5.1.6 |
xylnatmSoftPVccTargetSelectTypeIndicates whether the target VPI/VCI values
are to be used at the destination.
If the value 'any' is specified, the destination
switch will choose the VPI/VCI values. In such a
case, once the Soft PVCC atmSoftPVccOperStatus
value is 'connected', the value of this object
changes to 'required', such that the same VPI/VCI
values will continue to be used even if the connection
is subsequently torn down and re-established. The
VPI/VCI values chosen will be available for reading in
atmSoftPVccTargetVpi and atmSoftPVccTargetVci.
If the value 'required' is specified, then values
must be supplied for objects atmSoftPVccTargetVpi
and atmSoftPVccTargetVci prior to activation of the
row. These values are then to be used at the destination.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.5.1.7 |
xylnatmSoftPVccTargetVpiThe VPI value of the VCL used at the target interface.
This value is not relevant when the value of
atmSoftPVccTargetSelectType is 'any'.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.8 |
xylnatmSoftPVccTargetVciThe VCI value of the VCL used at the target interface.
This value must be filled in when the
atmSoftPVccTargetSelectType is set to 'required'.This
value is not relevant when the value of
atmSoftPVccTargetSelectType is 'any'.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.9 |
xylnatmSoftPVccLastReleaseCauseValue of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVCC.
Indicates the reason for the Release.ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.10 |
xylnatmSoftPVccLastReleaseDiagnosticValue of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVCC.ro OCTET STRING .1.3.6.1.4.1.800.2.9.2.1.5.1.11 |
xylnatmSoftPVccOperStatusDescribes the status of the Soft PVCC. When the
row is not 'active', the value of this
object is 'other'.ro Enumeration .1.3.6.1.4.1.800.2.9.2.1.5.1.12 |
xylnatmSoftPVccRestartWhen the value is set to 'restart' the Soft PVCC
is released if necessary and a new setup procedure
is begun. As a result of this action, the
atmSoftPVccOperStatus object transitions to
'establishmentInProgress' (if not already in this state)
and the atmSoftPVccRetryFailures object is cleared
When the value is set to 'noop' no operation is
performed. When read, the value 'noop' is returned.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.5.1.13 |
xylnatmSoftPVccRetryIntervalDefines the period to wait before attempting
to establish the Soft PVC after the first failed call
attempt. Zero represents an infinite interval indicating no
retries.rw INTEGER --UNITS seconds .1.3.6.1.4.1.800.2.9.2.1.5.1.14 |
xylnatmSoftPVccRetryTimerIndicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the Soft PVCC. When the timer
is not running, the value zero shall be returned.ro INTEGER --UNITS seconds .1.3.6.1.4.1.800.2.9.2.1.5.1.15 |
xylnatmSoftPVccRetryThresholdIndicates the number of consecutive call setup attempts for
the same Soft PVCC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicates that an infinite number of call attempts
are required to increment the atmSoftPvcCallFailures object
and thus disables alarms for the Soft PVCC.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.16 |
xylnatmSoftPVccRetryFailuresIndicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVCC is restarted.ro Gauge32 .1.3.6.1.4.1.800.2.9.2.1.5.1.17 |
xylnatmSoftPVccRetryLimitSets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. setting
atmSoftPVccRestart to 'restart') to initiate a new attempt
to establish the connection. A value of zero indicates
no limit - the attempts will continue until successful.rw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.18 |
xylnatmSoftPVccLowTDIndexThe low end TD...Refer 1695 for interpretationrw AtmxTrafficDescrParamIndex .1.3.6.1.4.1.800.2.9.2.1.5.1.19 |
xylnatmSoftPVccHighTDIndexThe high end TDrw AtmxTrafficDescrParamIndex .1.3.6.1.4.1.800.2.9.2.1.5.1.20 |
xylnatmSoftPVccLastChangeThe value of MIB II sysUpTime at the time this VCL entered its
current operational state. If the current state was entered
prior to the last re-initialization of the agent, then this object
contains a zero valuero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.9.2.1.5.1.21 |
xylnatmSoftPVccOutSlotThe outgoing slot if the connection has been established..else 0ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.22 |
xylnatmSoftPVccOutPortThe outgoing port...ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.23 |
xylnatmSoftPVccOutVpiThe outgoing vpiro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.24 |
xylnatmSoftPVccOutVciThe outgoing vci..ro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.25 |
xylnatmSoftPVccAdminStatusThe admin status of this VCLrw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.26 |
xylnatmSoftPVccCrossConnectIdentifierA non zero value if the VCL is cross-connectedro INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.27 |
xylnatmSoftPVccBbcIndexThe BBC Index from the BBC Tablerw INTEGER .1.3.6.1.4.1.800.2.9.2.1.5.1.28 |
xylnatmSoftPVccRowStatusUsed to create and delete a Soft PVCC.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.5.1.29 |
atmxSoftPvcBbcTableThis table contains information related to ATM bearer capability
type and associated parameters. SEQUENCE OF AtmxSoftPvcBbcEntry .1.3.6.1.4.1.800.2.9.2.1.6 |
atmxSoftPvcBbcEntryAn entry in this table is used to specify the bearer capa-
bility of a given soft PVC. AtmxSoftPvcBbcEntry .1.3.6.1.4.1.800.2.9.2.1.6.1 |
atmxSoftPvcBbcIndexIdentifies an entry in the atmSoftPvcBbcTable. AtmxSoftPvcBbcIndex .1.3.6.1.4.1.800.2.9.2.1.6.1.1 |
atmxSoftPvcBbcClassIndicates the broadband bearer capability class.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.2 |
atmxSoftPvcBbcTrafficTypeIndicates the broadband bearer capability traffic class.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.3 |
atmxSoftPvcBbcTimingRequirementsIndicates the broadband bearer capability timing requirements.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.4 |
atmxSoftPvcBbcSusceptibilityToClippingIndicates the broadband bearer capability susceptibility to
clipping parameter.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.5 |
atmxSoftPvcBbcUserPlaneConnectionConfigIndicates the broadband bearer capability user plane configuration
parmmeter.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.6 |
atmxSoftPvcBbcRowStatusThis object is used to create, modify, and delete rows
in the 'atmSoftPvcBbcTable'.rw Enumeration .1.3.6.1.4.1.800.2.9.2.1.6.1.7 |
atmxSoftPvcMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.2 |
atmxSoftPvcTraps OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.2.1 |
atmxSoftPvcTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.2.1.1 |
atmxSoftPvcCallFailuresTrapA notification indicating that one or more series of
call attempts in trying to establish a Soft PVPC or
Soft PVCC have failed since the last
atmSoftPvcCallFailureTrap was sent. If this trap has
not been sent for the last atmSoftPvcNotificationInterval,
then it will be sent on the next increment of
atmSoftPvcCallFailures. TRAP-TYPE .1.3.6.1.4.1.800.2.9.2.2.1.1.0.1 |
atmxSoftPvcMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3 |
atmxSoftPvcMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.1 |
atmxSoftPvcMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.1.1 |
atmxSoftPvcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2 |
atmxSoftPvcBaseMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.1 |
atmxSoftPvcVccMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.2 |
atmxSoftPvcVpcMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.3 |
atmxSoftPvcAddressMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.4 |
atmxCurrentlyFailingSoftPVccMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.5 |
atmxCurrentlyFailingSoftPVpcMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.9.2.3.2.6 |