Home/Catalog/XYLAN-POS3-MIB

XYLAN-POS3-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for XYLAN-POS3-MIB.

Objects

Active

Status

Dependencies

Imported Objects

RFC1213-MIB

RFC-1212

XYLAN-BASE-MIB

Objects

13 total

Object Name	Syntax	OID
sonetPort OBJECT IDENTIFIER `.1.3.6.1.4.1.800.2.11.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.800.2.11.4`
RFC1213-MIB Unknown `.1.3.6.1.4.1.800.2.11.4`	Unknown	`.1.3.6.1.4.1.800.2.11.4`
sonetPortConfigTableA table of Sonet physical layer status and parameter information. SEQUENCE OF SonetPortConfigEntry `.1.3.6.1.4.1.800.2.11.4.1`	SEQUENCE OF SonetPortConfigEntry	`.1.3.6.1.4.1.800.2.11.4.1`
sonetPortConfigEntryAn entry in the table, containing information about the physical layer of a Sonet interface. SonetPortConfigEntry `.1.3.6.1.4.1.800.2.11.4.1.1`	SonetPortConfigEntry	`.1.3.6.1.4.1.800.2.11.4.1.1`
sonetPortConfigSlotIndexA unique value which identifies this HSM board slot.ro INTEGER `.1.3.6.1.4.1.800.2.11.4.1.1.1`	INTEGER	`.1.3.6.1.4.1.800.2.11.4.1.1.1`
sonetPortConfigPortIndexA unique value which identifies this port.ro INTEGER `.1.3.6.1.4.1.800.2.11.4.1.1.2`	INTEGER	`.1.3.6.1.4.1.800.2.11.4.1.1.2`
sonetPortDescriptionThe name in ascii characters describing the interfacerw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.800.2.11.4.1.1.3`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.800.2.11.4.1.1.3`
sonetPortFramingTypePhysical layer medium type.rw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.4`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.4`
sonetPortLoopbackConfigThis variable represents the loopback confi- guration of the Sonet interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. sonetPayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. sonetLineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. sonetOtherLoop Loopbacks that are not defined here.rw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.5`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.5`
sonetPortTransmitClockSourceThe source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used.rw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.6`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.6`
sonetPortPlScramblePayload Scrambling enabled/disabledrw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.7`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.7`
sonetPortStatusChangeTrapEnableIndicates whether traps should be generated for this interface.rw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.8`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.8`
sonetPortFcsSizeThe size of the FCS, in bits.rw Enumeration `.1.3.6.1.4.1.800.2.11.4.1.1.9`	Enumeration	`.1.3.6.1.4.1.800.2.11.4.1.1.9`