XYLAN-NTP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-NTP-MIB.
155
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
155 total| Object Name |
|---|
xylanNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.27.1 |
IMPORTS Unknown .1.3.6.1.4.1.800.2.27.1 |
xylanNtpEnableEnables/disables NTP server.rw Enumeration .1.3.6.1.4.1.800.2.27.1.1 |
xylanNtpMonitorEnableEnables/disables NTP monitor.rw Enumeration .1.3.6.1.4.1.800.2.27.1.2 |
xylanNtpPeerTableTable containing the synchronization host this
switch will be associated with. SEQUENCE OF NtpPeerEntry .1.3.6.1.4.1.800.2.27.1.3 |
xylanNtpPeerEntryEach entry corresponds to a synchronization host. NtpPeerEntry .1.3.6.1.4.1.800.2.27.1.3.1 |
xylanNtpPeerAddressThe IP address of the synchronization host.ro IpAddress .1.3.6.1.4.1.800.2.27.1.3.1.1 |
xylanNtpPeerTypeType of synchronization host that will communicate
with this switch.rw Enumeration .1.3.6.1.4.1.800.2.27.1.3.1.2 |
xylanNtpPeerAuthThe authorization keyid for the remote host.rw INTEGER .1.3.6.1.4.1.800.2.27.1.3.1.3 |
xylanNtpPeerVersionThe NTP version to communicate with the remote host.rw INTEGER .1.3.6.1.4.1.800.2.27.1.3.1.4 |
xylanNtpPeerMinpollThe minimum poll duration to the remote host. This
value is a power of 2 seconds when the poll will occur.
For example, 4 (2 to the power 4) is 16 seconds.rw INTEGER .1.3.6.1.4.1.800.2.27.1.3.1.5 |
xylanNtpPeerPreferMarks the host as a preferred connection.rw Enumeration .1.3.6.1.4.1.800.2.27.1.3.1.6 |
xylanNtpPeerAdminThe current state of the table entry.
If the value written is a 2, the entry is
deleted.rw Enumeration .1.3.6.1.4.1.800.2.27.1.3.1.7 |
xylanNtpPeerNameThe DNS name for the peer association,rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.1.3.1.8 |
xylanNtpAuthDelayThis field sets a specified time interval
that is added to timestamps included in
requests to the server that required
authentication. Typically this delay is
needed in cases of long delay paths, or servers
whose clocks are unsynchronized. Value is
in milli-secondsrw INTEGER .1.3.6.1.4.1.800.2.27.1.4 |
xylanNtpKeysFileName of the file which has the authorization keys.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.1.5 |
xylanNtpConfigReqKeyIdRequest messages ask for information from the NTP
entity such as timestamp information, statistics, etc.
This changes the authentication key identifier for
request messages sent from the switch to another NTP
entity.rw INTEGER .1.3.6.1.4.1.800.2.27.1.6 |
xylanNtpConfigCtlKeyIdControl messages attempt to change the configuration
of the NTP entity in some fashion. This changes
the authentication key identifier for control messages
sent from the switch to another NTP entity.rw INTEGER .1.3.6.1.4.1.800.2.27.1.7 |
xylanNtpConfigCfgKeyIdConfiguration messages changes information on the
NTP entity.rw INTEGER .1.3.6.1.4.1.800.2.27.1.8 |
xylanNtpPrecisionThis sets the server's advertised precision.rw INTEGER( -20..-1 ) .1.3.6.1.4.1.800.2.27.1.9 |
xylanNtpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.27.2 |
xylanNtpPeerListTableUsed to display a brief list of all NTP associations
related to this switch (servers, peers, etc.). SEQUENCE OF NtpPeerListEntry .1.3.6.1.4.1.800.2.27.2.1 |
xylanNtpPeerListEntryEach entry corresponds to one association. NtpPeerListEntry .1.3.6.1.4.1.800.2.27.2.1.1 |
xylanNtpPeerListAddressThe IP address of the association.ro IpAddress .1.3.6.1.4.1.800.2.27.2.1.1.1 |
xylanNtpPeerListLocalThe local interface address assigned by
NTP to the remote association. If this address is
0.0.0.0, then the local address has yet to be
determined.ro IpAddress .1.3.6.1.4.1.800.2.27.2.1.1.2 |
xylanNtpPeerListStratumThe stratum level of the remote peer. If this
number is 16, the remote peer has not been
synchronized.ro INTEGER .1.3.6.1.4.1.800.2.27.2.1.1.3 |
xylanNtpPeerListPollThe polling interval, in seconds.ro INTEGER .1.3.6.1.4.1.800.2.27.2.1.1.4 |
xylanNtpPeerListReachThe reachability register of the remote
association, in octal format. This number is
determined by the NTP algorithm.ro INTEGER .1.3.6.1.4.1.800.2.27.2.1.1.5 |
xylanNtpPeerListDelayThe currently estimated delay of this remote
association, in seconds. This time is determined
by the NTP algorithm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.1.1.6 |
xylanNtpPeerListOffsetThe currently estimated offset of this remote
association, in seconds. This time is determined
by the NTP algorithm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.1.1.7 |
xylanNtpPeerListDispersionThe currently estimated dispersion of this remote
association, in seconds. This time is determined
by the NTP algorithm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.1.1.8 |
xylanNtpPeerListSyncedIndicates that NTP is synchronized with this
entity.ro Enumeration .1.3.6.1.4.1.800.2.27.2.1.1.9 |
xylanNtpPeerListNameThe DNS name for the peer association,ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.1.1.10 |
xylanNtpLocalInfoUsed to display information about the local
switch's implementation of NTP. INTEGER .1.3.6.1.4.1.800.2.27.2.2 |
xylanNtpInfoPeerThe IP address of the remote association.ro IpAddress .1.3.6.1.4.1.800.2.27.2.2.1 |
xylanNtpInfoModeThe peer mode of this remote association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.2 |
xylanNtpInfoLeapIndicatorThe status of leap second insertion for
this association.ro INTEGER .1.3.6.1.4.1.800.2.27.2.2.3 |
xylanNtpInfoStratumThe stratum level of the remote peer.
If this number is 16, the remote peer has not
been synchronized.ro INTEGER .1.3.6.1.4.1.800.2.27.2.2.4 |
xylanNtpInfoPrecisionThe advertised precision of the switch.
It will be a number between -4 and -20.ro INTEGER( -20..-4 ) .1.3.6.1.4.1.800.2.27.2.2.5 |
xylanNtpInfoDistanceThis is a signed fixed-point number indicating
the total roundtrip delay to the primary reference
source at the root of the synchronization subnet,
in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.6 |
xylanNtpInfoDispersionThis is a signed fixed-point number indicating
the maximum error relative to the primary reference
source at the root of the synchronization subnet,
in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.7 |
xylanNtpInfoReferenceIdThis is a 32-bit code identifying the particular
reference clock. Can be an IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.8 |
xylanNtpInfoReferenceTimeThis is the local time at which the local clock
was last set or corrected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.9 |
xylanNtpInfoFrequencyA number determining the local clocks frequency
in relation to a reference clock's Pulse per
Second (PPS). If the clock is running in perfect
synchronization, this number should be 1. Otherwise,
it will be slightly lower or higher in order to
compensate for the time differ-ence.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.10 |
xylanNtpInfoStabilityThe stability of the clock in relation to a
reference clock's Pulse per Second (PPS).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.11 |
xylanNtpInfoBroadcastDelayThe broadcast delay, in seconds, of this association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.12 |
xylanNtpInfoAuthDelayThe authentication delay, in seconds, of this
association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.2.13 |
xylanNtpPeerShowTableUsed to display a brief list of all NTP associations
related to this switch (servers, peers, etc.). SEQUENCE OF NtpPeerShowEntry .1.3.6.1.4.1.800.2.27.2.3 |
xylanNtpPeerShowEntryEach entry corresponds to one association. NtpPeerShowEntry .1.3.6.1.4.1.800.2.27.2.3.1 |
xylanNtpPeerShowRemoteThe IP address of the remote association.ro IpAddress .1.3.6.1.4.1.800.2.27.2.3.1.1 |
xylanNtpPeerShowLocalThe local interface address assigned by NTP to the
remote associations.ro IpAddress .1.3.6.1.4.1.800.2.27.2.3.1.2 |
xylanNtpPeerShowHmodeThe host mode of this remote association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.3 |
xylanNtpPeerShowPmodeThe peer mode of this remote association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.4 |
xylanNtpPeerShowStratumThe stratum level of the remote peer.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.5 |
xylanNtpPeerShowPrecisionThe advertised precision of this association,
which is a number from -4 to -20.ro INTEGER(-20..-4) .1.3.6.1.4.1.800.2.27.2.3.1.6 |
xylanNtpPeerShowLeapIndicatorThe status of leap second insertion for
this association.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.7 |
xylanNtpPeerShowReferenceIdThe status of leap second insertion for
this association. Normally an IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.8 |
xylanNtpPeerShowRootDistanceThis is a signed fixed-point number indicating
the total roundtrip delay to the primary reference
source at the root of the synchronization subnet,
in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.9 |
xylanNtpPeerShowRootDispersionThis is a signed fixed-point number indicating
the maximum error relative to the primary reference
source at the root of the synchronization subnet,
in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.10 |
xylanNtpPeerShowPpollThe poll time for this association when it is a peer.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.11 |
xylanNtpPeerShowHpollThe poll time for this association when it is a host.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.12 |
xylanNtpPeerShowKeyidThis is an integer identifying the cryptographic
key used to generate the message authentication code.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.13 |
xylanNtpPeerShowVersionWhat version of NTP this association is using.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.14 |
xylanNtpPeerShowAssociationThe number of seconds since this NTP entity was
associated with the switch.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.15 |
xylanNtpPeerShowValidThis is an integer counter indicating the valid
samples remaining in the filter register.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.16 |
xylanNtpPeerShowReachThis is a shift register used to determine the
reachability status of this peer.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.17 |
xylanNtpPeerShowUnreachThe number of times this NTP entity was unreachable.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.18 |
xylanNtpPeerShowFlashThese reveal the state at the last grumble from the
peer and are most handy for diagnosing problems.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.19 |
xylanNtpPeerShowBroadcastOffsetThe broadcast delay.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.20 |
xylanNtpPeerShowTTLThis fields displays the Time-to-Live (TTL) time
in seconds and the mode (unicast, multicast, or
broadcast) of NTP messages sent to a broadcast address.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.21 |
xylanNtpPeerShowTimerThe time to next poll.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.22 |
xylanNtpPeerShowFlagsThis counter lists what flags have been configured
for this NTP entity.
0x01 - Configured
0x02 - System Peer
0x10 - Preferred
0x20 - Authentable.ro INTEGER .1.3.6.1.4.1.800.2.27.2.3.1.23 |
xylanNtpPeerShowReferenceTimeThis is the local time, in timestamp format, when
the local clock was last updated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.24 |
xylanNtpPeerShowOriginateTimeThis is the local time, in timestamp format, of
the peer when its latest NTP message was sent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.25 |
xylanNtpPeerShowReceiveTimeThis is the local time, in timestamp format, when
the latest NTP message from the peer arrived.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.26 |
xylanNtpPeerShowTransmitTimeThis is the local time, in timestamp format, at
which the last NTP message was sent from this
association.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.27 |
xylanNtpPeerShowOffsetThe currently estimated offset of this remote
association, in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.28 |
xylanNtpPeerShowDelayThe currently estimated delay of this remote
association, in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.29 |
xylanNtpPeerShowDispersionThe currently estimated dispersion of this remote
association, in seconds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.30 |
xylanNtpPeerShowNameThe DNS name for the peer association,ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.2.3.1.31 |
xylanNtpStats OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.27.3 |
xylanNtpStatsStatThe local server statistics. INTEGER .1.3.6.1.4.1.800.2.27.3.1 |
xylanNtpStatsStatUptimeThe number of seconds the local NTP server has
been associated with the switch.ro Counter .1.3.6.1.4.1.800.2.27.3.1.1 |
xylanNtpStatsStatResetThe number of seconds since the last time the
local NTP server has been restarted.ro Counter .1.3.6.1.4.1.800.2.27.3.1.2 |
xylanNtpStatsStatBadStratumThe number of NTP packets received that had a
corrupted stratum bit in the data of the packet.ro Counter .1.3.6.1.4.1.800.2.27.3.1.3 |
xylanNtpStatsStatOldVersionThe number of NTP packets received that were
of an older version of NTP (either version 1 or 2).ro Counter .1.3.6.1.4.1.800.2.27.3.1.4 |
xylanNtpStatsStatNewVersionThe number of NTP packets received that were
version 3 of NTP.ro Counter .1.3.6.1.4.1.800.2.27.3.1.5 |
xylanNtpStatsStatUnknownVersionThe number of NTP packets received that the
version was unknown (most likely due to packet
corruption).ro Counter .1.3.6.1.4.1.800.2.27.3.1.6 |
xylanNtpStatsStatBadLengthThe number of NTP packets received that did not
fit the NTP packet structure (most likely due to
packet corruption).ro Counter .1.3.6.1.4.1.800.2.27.3.1.7 |
xylanNtpStatsStatProcessedThe total number of NTP packets processed.ro Counter .1.3.6.1.4.1.800.2.27.3.1.8 |
xylanNtpStatsStatBadAuthThe number of NTP packets rejected because they
did not meet authentication standards.ro Counter .1.3.6.1.4.1.800.2.27.3.1.9 |
xylanNtpStatsStatLimitRejectsThe number of NTP packets rejected because they
did not meet authentication standards.ro Counter .1.3.6.1.4.1.800.2.27.3.1.10 |
xylanNtpStatsPeerTableTable containing the synchronization host statistics. SEQUENCE OF NtpStatsPeerEntry .1.3.6.1.4.1.800.2.27.3.2 |
xylanNtpStatsPeerEntryEach entry corresponds to a synchronization host. NtpStatsPeerEntry .1.3.6.1.4.1.800.2.27.3.2.1 |
xylanNtpStatsPeerAddressThe IP address of the synchronization host.ro IpAddress .1.3.6.1.4.1.800.2.27.3.2.1.1 |
xylanNtpStatsPeerLocalThe local interface address assigned by
NTP to the remote association.ro IpAddress .1.3.6.1.4.1.800.2.27.3.2.1.2 |
xylanNtpStatsPeerLastRcvThe time since the last packet was received.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.3 |
xylanNtpStatsPeerNextSendThe time until the next packet is to be sent.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.4 |
xylanNtpStatsPeerReachChangeThe time that the peer has been reachable.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.5 |
xylanNtpStatsPeerPacketsSentThe number of packets that have been sent.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.6 |
xylanNtpStatsPeerPacketsRcvdThe number of packets that have been received.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.7 |
xylanNtpStatsPeerBadAuthThe number of packets received with bad
authentication.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.8 |
xylanNtpStatsPeerBogusOriginThe number of bogus packets.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.9 |
xylanNtpStatsPeerDuplicateThe number of duplicated packets received.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.10 |
xylanNtpStatsPeerBadDispersionThe number bad dispersions.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.11 |
xylanNtpStatsPeerBadRefTimeThe number of bad reference times received.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.12 |
xylanNtpStatsPeerCandidateOrderThe order of synchronization candidates.ro Counter .1.3.6.1.4.1.800.2.27.3.2.1.13 |
xylanNtpStatsPeerResetResets the statistics for the peer.rw INTEGER .1.3.6.1.4.1.800.2.27.3.2.1.14 |
xylanNtpStatsPeerNameThe DNS name for the peer association,ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.3.2.1.15 |
xylanNtpStatsLoopThe loop filter is used to control and correct
the phase of timestamps as processed by the local
clock. The loop filter examines timestamps sent to
and from the local clock and can adjust them to
account for natural wander and jitter. INTEGER .1.3.6.1.4.1.800.2.27.3.3 |
xylanNtpStatsLoopOffsetThe currently estimated offset of this remote
association, in seconds. This counter indicates
the offset of the peer clock relative to the local
clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.3.3.1 |
xylanNtpStatsLoopFrequencyA number determining the local clocks frequency
in relation to a reference clocks Pulse per Second
(PPS). If the clock is running in perfect
synchronization, this number should be 1. Otherwise,
it will be slightly lower or higher in order to
compensate for the time discrepancy between the
reference clock and the local clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.3.3.2 |
xylanNtpStatsLoopPollAdjustDetermines the peer polling time.ro INTEGER .1.3.6.1.4.1.800.2.27.3.3.3 |
xylanNtpStatsLoopWatchdogMakes sure that NTP timer continues to run.ro Counter .1.3.6.1.4.1.800.2.27.3.3.4 |
xylanNtpStatsIoGeneral statistics on received and transmitted
NTP packets for this switch. INTEGER .1.3.6.1.4.1.800.2.27.3.4 |
xylanNtpStatsIoResetThe number of seconds since the last restart of NTP.ro Counter .1.3.6.1.4.1.800.2.27.3.4.1 |
xylanNtpStatsIoRcvBuffersThe number of switch receive buffers currently being
used by this NTP entity.ro Counter .1.3.6.1.4.1.800.2.27.3.4.2 |
xylanNtpStatsIoFreeRcvBuffersThe number of free receive buffers.ro Counter .1.3.6.1.4.1.800.2.27.3.4.3 |
xylanNtpStatsIoUsedRcvBuffersThe number of receive buffers currently being used.ro Counter .1.3.6.1.4.1.800.2.27.3.4.4 |
xylanNtpStatsIoRefillsThe number of times we added packets.ro Counter .1.3.6.1.4.1.800.2.27.3.4.5 |
xylanNtpStatsIoDroppedPacketsThe number of packets dropped.ro Counter .1.3.6.1.4.1.800.2.27.3.4.6 |
xylanNtpStatsIoIgnoredPacketsThe number of packets ignored.ro Counter .1.3.6.1.4.1.800.2.27.3.4.7 |
xylanNtpStatsIoRcvPacketsThe total number of NTP packets received by the
switch.ro Counter .1.3.6.1.4.1.800.2.27.3.4.8 |
xylanNtpStatsIoSentPacketsThe total number of NTP packets sent by the switch.ro Counter .1.3.6.1.4.1.800.2.27.3.4.9 |
xylanNtpStatsIoNotSentPacketsThe number of NTP packets generated but not sent
due to restrictions.ro Counter .1.3.6.1.4.1.800.2.27.3.4.10 |
xylanNtpStatsIoInterruptsThe number of times NTP information was interrupted
in the process of transmitting or receiving.ro Counter .1.3.6.1.4.1.800.2.27.3.4.11 |
xylanNtpStatsIoInterruptsRcvThe number of packets received by the interrupt
handler.ro Counter .1.3.6.1.4.1.800.2.27.3.4.12 |
xylanNtpStatsResetResets the statistics counters for the following
subsystems:
0x01 - all peers
0x02 - i/o
0x04 - system
0x08 - memory
0x10 - timer
0x20 - authentication
0x40 - controlrw INTEGER .1.3.6.1.4.1.800.2.27.3.5 |
xylanNtpStatsMonitorTableTable containing the association monitoring list. SEQUENCE OF NtpStatsMonitorEntry .1.3.6.1.4.1.800.2.27.3.6 |
xylanNtpStatsMonitorEntryEach entry corresponds to a synchronization host. NtpStatsMonitorEntry .1.3.6.1.4.1.800.2.27.3.6.1 |
xylanNtpStatsMonitorIndexTable index.ro Counter .1.3.6.1.4.1.800.2.27.3.6.1.1 |
xylanNtpStatsMonitorAddressThe IP address of the remote association.ro IpAddress .1.3.6.1.4.1.800.2.27.3.6.1.2 |
xylanNtpStatsMonitorPortThe IP port number of the association.ro INTEGER .1.3.6.1.4.1.800.2.27.3.6.1.3 |
xylanNtpStatsMonitorLocalAddressThe local IP address of the association.ro IpAddress .1.3.6.1.4.1.800.2.27.3.6.1.4 |
xylanNtpStatsMonitorCountThe number of NTP packets received from
this association.ro Counter .1.3.6.1.4.1.800.2.27.3.6.1.5 |
xylanNtpStatsMonitorModeThe mode the NTP association uses in relation
to the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.3.6.1.6 |
xylanNtpStatsMonitorVersionThe version of NTP the association is using.ro INTEGER .1.3.6.1.4.1.800.2.27.3.6.1.7 |
xylanNtpStatsMonitorDropThe number of NTP packets received from this
association that were dropped.ro Counter .1.3.6.1.4.1.800.2.27.3.6.1.8 |
xylanNtpStatsMonitorLastThe number of seconds since the last NTP message
has been received from this association.ro Counter .1.3.6.1.4.1.800.2.27.3.6.1.9 |
xylanNtpStatsMonitorFirstThe number of seconds since the first NTP message
has been received from this association.ro Counter .1.3.6.1.4.1.800.2.27.3.6.1.10 |
xylanNtpStatsMonitorNameThe DNS name for the peer association,ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.800.2.27.3.6.1.11 |
xylanNtpAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.27.4 |
xylanNtpAccess OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.27.5 |
xylanNtpAccessKeyIdTableTable containing the trusted keys. SEQUENCE OF NtpAccessKeyIdEntry .1.3.6.1.4.1.800.2.27.5.1 |
xylanNtpAccessKeyIdEntryEntry of a trusted key. NtpAccessKeyIdEntry .1.3.6.1.4.1.800.2.27.5.1.1 |
xylanNtpAccessKeyIdKeyIdKeyid of the key in the key file.ro INTEGER .1.3.6.1.4.1.800.2.27.5.1.1.1 |
xylanNtpAccessKeyIdAdminThe current state of the table entry.
If the value written is a 2, the entry is
deleted.rw Enumeration .1.3.6.1.4.1.800.2.27.5.1.1.2 |
xylanNtpAccessRestrictedTableTable containing the restricted addresses. SEQUENCE OF NtpAccessRestrictedEntry .1.3.6.1.4.1.800.2.27.5.2 |
xylanNtpAccessRestrictedEntryEntry of a restricted address. NtpAccessRestrictedEntry .1.3.6.1.4.1.800.2.27.5.2.1 |
xylanNtpAccessRestrictedIpAddressIP address to restrict.ro IpAddress .1.3.6.1.4.1.800.2.27.5.2.1.1 |
xylanNtpAccessRestrictedMaskIP mask to restrict.ro IpAddress .1.3.6.1.4.1.800.2.27.5.2.1.2 |
xylanNtpAccessRestrictedRestrictionsA mask indicating the restrictions to apply
to the entry.
0x0001 - ignore, Ignore all packets from hosts.
0x0002 - noquery, Ignore all NTP information
queries and configuration requests
from the source.
0x0004 - nomodify, Ignore all NTP information
queries and configuration requests
that attempt to modify the state of the server.
0x0008 - notrap, Decline to provide control message
trap service to matching hosts.
0x0010 - lowpriotrap, Declare traps set by matching
hosts to be low priority.
0x0020 - noserve, Ignore NTP packets other than
information queries and config-uration requests.
0x0040 - nopeer, Provide stateless time service to
polling hosts, but do not allocate peer
memory resources to these hosts even if
they otherwise might be considered useful
as future synchronization partners.
0x0080 - notrust, Treat these hosts normally in other
respects, but never use them as synchronization
sources.
0x0100 - limited, These hosts are subject to a
limitation of the number of clients from the
same net.rw INTEGER .1.3.6.1.4.1.800.2.27.5.2.1.3 |
xylanNtpAccessRestrictedCountNumber of packets matched.ro INTEGER .1.3.6.1.4.1.800.2.27.5.2.1.4 |
xylanNtpAccessRestrictedAdminThe current state of the table entry.
If the value written is a 2, the entry is
deleted.rw Enumeration .1.3.6.1.4.1.800.2.27.5.2.1.5 |
xylanNtpAccessRereadKeyFileRe-examining the keys file will load all currently
existing keys in the file into the switch's memory.rw INTEGER .1.3.6.1.4.1.800.2.27.5.3 |