XYLAN-IPX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-IPX-MIB.
63
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
xylanIpxRoutingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.1 |
IMPORTS Unknown .1.3.6.1.4.1.800.2.6.1 |
xylanIpxStaticRouteTableThe Static Routes table contains information about all
destinations reached via statically configured routes. SEQUENCE OF IPXStaticRouteEntry .1.3.6.1.4.1.800.2.6.1.1 |
xylanIpxStaticRouteEntryEach entry corresponds to one static route. IPXStaticRouteEntry .1.3.6.1.4.1.800.2.6.1.1.1 |
xylanIpxStaticRouteNetNumThe IPX network number of the route's destination.rw OCTET STRING .1.3.6.1.4.1.800.2.6.1.1.1.1 |
xylanIpxStaticRouteAdminStateThe current status of this route. active (1) means
the route is functioning, delete (2) tell SNMP to
delete the routerw Enumeration .1.3.6.1.4.1.800.2.6.1.1.1.2 |
xylanIpxStaticRouteNextHopNetThe IPX network number of the router used to
reach the first hop in the static route.rw OCTET STRING .1.3.6.1.4.1.800.2.6.1.1.1.3 |
xylanIpxStaticRouteNextHopNodeThe IPX node number of the router used to
reach the first hop in the static route.rw OCTET STRING .1.3.6.1.4.1.800.2.6.1.1.1.4 |
xylanIpxStaticRouteTicksThe delay, in ticks, to reach the route's destination.ro INTEGER .1.3.6.1.4.1.800.2.6.1.1.1.5 |
xylanIpxStaticRouteHopCountThe number of hops necessary to reach the destination.ro INTEGER .1.3.6.1.4.1.800.2.6.1.1.1.6 |
xylanIpxFilterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.2 |
xylanIpxRipSapFilterTableThe IPX Rip/Sap Filter Table contains information about
all filters that have been defined. SEQUENCE OF IPXRipSapFilterEntry .1.3.6.1.4.1.800.2.6.2.1 |
xylanIpxRipSapFilterEntryEach entry corresponds to one filter. IPXRipSapFilterEntry .1.3.6.1.4.1.800.2.6.2.1.1 |
xylanIpxRipSapFilterNumThe number identifying this instance. This number can
be used when specifying a filter to delete.ro INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.1 |
xylanIpxRipSapFilterAdminStateThe current status of this filter, active (1) means
the filter is functioning, delete (2) tells SNMP to
delete the filterrw Enumeration .1.3.6.1.4.1.800.2.6.2.1.1.2 |
xylanIpxRipSapFilterTypeThe type of filter.rw Enumeration .1.3.6.1.4.1.800.2.6.2.1.1.3 |
xylanIpxRipSapFilterNetThe IPX Network Address to filter. A network address
of all 0's is used to denote All Networks.rw OCTET STRING .1.3.6.1.4.1.800.2.6.2.1.1.4 |
xylanIpxRipSapFilterNetMaskThe IPX Network Mask to be used.rw OCTET STRING .1.3.6.1.4.1.800.2.6.2.1.1.5 |
xylanIpxRipSapFilterNodeThe IPX node address to filter. A node address
of all 0's is used to denote All Nodes.rw OCTET STRING .1.3.6.1.4.1.800.2.6.2.1.1.6 |
xylanIpxRipSapFilterNodeMaskThe IPX node address mask to be used.rw OCTET STRING .1.3.6.1.4.1.800.2.6.2.1.1.7 |
xylanIpxRipSapFilterSvcTypeThe SAP service type on which to filter. The SAP
service types are defined by Novell. A value of
ALL (65535) indicates that all services will be filtered.rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.8 |
xylanIpxRipSapFilterModeThe action defined by this filter. block (1) means
packets matching this filter will be blocked, and
allow (0) means that packets matching this filter
will be allowed.rw Enumeration .1.3.6.1.4.1.800.2.6.2.1.1.9 |
xylanIpxRipSapFilterGroupIdThe GroupId can be used to apply this filter to a
particular interface. A GroupId of 0 means that the
filter is global.rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.10 |
xylanIpxRipSapFilterVlanIdThe VlanId for this filter.rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.11 |
xylanIpxRipSapFilterWanTypeIf the Vlan has Wan Routing enabled, this object
can be used to specify whether this interface is
a Frame Relay service or a PPP service. This will
be used to determine whether the slot/port/vc or
PeerId fields are applicable to this entry. A value
of 1 implies that this field is not used. (The
interface is not a WAN interface or the filter is
not being applied to a specific VC or PeerId.) A
value of 2 indicates that this is a Frame Relay service
in which case the slot/port/vc fields can be used to
apply the filter to a specific VC. A value of 3
indicates that this is a PPP service and the Peer ID
field may be used.rw Enumeration .1.3.6.1.4.1.800.2.6.2.1.1.12 |
xylanIpxRipSapFilterSlotIf the WanType specifies a Frame Relay service, the
slot/port/vc can be used to apply this filter to a
particular Virtual Circuit (VC).rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.13 |
xylanIpxRipSapFilterPortIf the WanType specifies a Frame Relay service, the
slot/port/vc can be used to apply this filter to a
particular Virtual Circuit (VC).rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.14 |
xylanIpxRipSapFilterVcIf the WanType specifies a Frame Relay service, the
slot/port/vc can be used to apply this filter to a
particular Virtual Circuit (VC).rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.15 |
xylanIpxRipSapFilterPeerIdIf the WanType specifies a PPP service, the
PeerId can be used to apply this filter to a
particular Peer.rw INTEGER .1.3.6.1.4.1.800.2.6.2.1.1.16 |
xylanIpxWatchdogSpoofGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.3 |
xylanIpxWatchdogSpoofTableThe IPX Watchdog Spoofing Table contains information about
all of the WAN routing services and their current IPX spoofing
status. SEQUENCE OF IPXWatchdogSpoofEntry .1.3.6.1.4.1.800.2.6.3.1 |
xylanIpxWatchdogSpoofEntryEach entry corresponds to one WAN routing service. IPXWatchdogSpoofEntry .1.3.6.1.4.1.800.2.6.3.1.1 |
xylanIpxWatchdogSpoofGroupIdThe GroupId of the WAN routing service that this entry
applies to.rw INTEGER .1.3.6.1.4.1.800.2.6.3.1.1.1 |
xylanIpxWatchdogSpoofModeThis controls whether the IPX Watchdog Spoofing is
enabled or disabled. When enabled, this routing service
will spoof IPX Watchdog packets. When disabled,
this routing service will not spoof IPX Watchdog packets.rw Enumeration .1.3.6.1.4.1.800.2.6.3.1.1.2 |
xylanIpxSerialFilterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.4 |
xylanIpxSerialFilterTableThe IPX Serialization Filtering Table contains
information about all of the WAN routing services and their
current IPX Serialization Filtering status. SEQUENCE OF IPXSerialFilterEntry .1.3.6.1.4.1.800.2.6.4.1 |
xylanIpxSerialFilterEntryEach entry corresponds to one WAN routing service. IPXSerialFilterEntry .1.3.6.1.4.1.800.2.6.4.1.1 |
xylanIpxSerialFilterGroupIdThe GroupId of the WAN routing service that this entry
applies to.rw INTEGER .1.3.6.1.4.1.800.2.6.4.1.1.1 |
xylanIpxSerialFilterModeThis controls whether the IPX Serialization Filtering is
enabled or disabled. When enabled, this routing service
will filter IPX Serialization packets. When disabled,
this routing service will not filter IPX Serialization
packets.rw Enumeration .1.3.6.1.4.1.800.2.6.4.1.1.2 |
xylanSpxKeepaliveSpoofGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.5 |
xylanSpxKeepaliveSpoofTableThe SPX Keepalive Spoofing Table contains information about
all of the WAN routing services and their current SPX Keepalive
spoofing status. SEQUENCE OF SPXKeepaliveSpoofEntry .1.3.6.1.4.1.800.2.6.5.1 |
xylanSpxKeepaliveSpoofEntryEach entry corresponds to one WAN routing service. SPXKeepaliveSpoofEntry .1.3.6.1.4.1.800.2.6.5.1.1 |
xylanSpxKeepaliveSpoofGroupIdThe GroupId of the WAN routing service that this entry
applies to.rw INTEGER .1.3.6.1.4.1.800.2.6.5.1.1.1 |
xylanSpxKeepaliveSpoofModeThis controls whether the SPX Keepalive Spoofing is
enabled or disabled. When enabled, this routing service
will spoof SPX Keepalive packets. When disabled,
this routing service will not spoof SPX Keepalive packets.rw Enumeration .1.3.6.1.4.1.800.2.6.5.1.1.2 |
xylanIpxType20Group OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.6 |
xylanIpxType20TableThe IPX Type 20 packets allow NetBios to use IPX. This
can enable the passing of packet on each interface. SEQUENCE OF IPXType20Entry .1.3.6.1.4.1.800.2.6.6.1 |
xylanIpxType20EntryEach entry corresponds to one Virtual LAN. IPXType20Entry .1.3.6.1.4.1.800.2.6.6.1.1 |
xylanIpxType20VlanIdThe VLAN Id of the routing interface that this entry
applies to.rw INTEGER .1.3.6.1.4.1.800.2.6.6.1.1.1 |
xylanIpxType20ModeThis controls whether IPX Type 20 packet are
enabled or disabled. When enabled, this routing interface
will forward Type 20 packets. When disabled,
the packets will not.rw Enumeration .1.3.6.1.4.1.800.2.6.6.1.1.2 |
xylanIpxTimerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.7 |
xylanIpxTimerTableThe IPX Timer allows adjustable variation of the RIP and SAP
timers. SEQUENCE OF IPXTimerEntry .1.3.6.1.4.1.800.2.6.7.1 |
xylanIpxTimerEntryEach entry corresponds to one Virtual LAN. IPXTimerEntry .1.3.6.1.4.1.800.2.6.7.1.1 |
xylanIpxTimerVlanIdThe VLAN Id of the routing interface that this entry
applies to.rw INTEGER .1.3.6.1.4.1.800.2.6.7.1.1.1 |
xylanIpxTimerSapThis controls whether IPX SAP packet timer duration.rw INTEGER .1.3.6.1.4.1.800.2.6.7.1.1.2 |
xylanIpxTimerRipThis controls whether IPX RIP packet timer duration.rw INTEGER .1.3.6.1.4.1.800.2.6.7.1.1.3 |
xylanIpxDefRouteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.8 |
xylanIpxDefRouteTableThe default route table contains information about
the destinations to which all packets are sent when the
destination network is not known. SEQUENCE OF IPXDefRouteEntry .1.3.6.1.4.1.800.2.6.8.1 |
xylanIpxDefRouteEntryOne table entry per switch for default route. IPXDefRouteEntry .1.3.6.1.4.1.800.2.6.8.1.1 |
xylanIpxDefRouteNumThe table row ID will always be 1.rw INTEGER .1.3.6.1.4.1.800.2.6.8.1.1.1 |
xylanIpxDefRouteNetThe IPX network number of the router used to
reach the first hop in the default route.rw OCTET STRING .1.3.6.1.4.1.800.2.6.8.1.1.2 |
xylanIpxDefRouteNodeThe IPX node number of the router used to
reach the first hop in the default route.rw OCTET STRING .1.3.6.1.4.1.800.2.6.8.1.1.3 |
xylanIpxExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.6.9 |
xylanIpxExtMsgA boolean variable that indicated whether extended RIP/SAP
packets are sent and received.rw INTEGER .1.3.6.1.4.1.800.2.6.9.1 |