XYLAN-DS3-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-DS3-MIB.
70
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
dsx3Port OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.11.2 |
RFC1213-MIB Unknown .1.3.6.1.4.1.800.2.11.2 |
dsx3PortConfigTableA table of DS3/E3 physical layer status and parameter
information. SEQUENCE OF Dsx3PortConfigEntry .1.3.6.1.4.1.800.2.11.2.1 |
dsx3PortConfigEntryAn entry in the table, containing information about
the physical layer of a DS3/E3 interface. Dsx3PortConfigEntry .1.3.6.1.4.1.800.2.11.2.1.1 |
dsx3PortConfigSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.11.2.1.1.1 |
dsx3PortConfigPortIndexA unique value which identifies this port.ro INTEGER .1.3.6.1.4.1.800.2.11.2.1.1.2 |
dsx3PortConfigIfTypeThis objects indicates type of interface.ro Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.3 |
dsx3PortConfigTcSubLayerThe type of specific Transmission Convergence sublayer used
on this port. Each option is described as follows:
none - specific sublayer is not present.
plcp - Physical Layer Convergence Protocol.
adm - ATM Direct Mapping.rw Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.4 |
dsx3PortConfigPlcpStatusThis object indicates current status of PLCP. This object
only applies to port which sublayer is configured to PLCP.
A value of 1 is returned for other cases.
The dsx3PortStatsPlcpStatus is a bit map represented as a
sum, therfore it can represent multiple alarms.
1 - plcpNoAlarm No alarm present
2 - plcpOof Out of frame
4 - plcpLof Loss of frame
8 - plcpYellow Receive yellow alarm from far-endro INTEGER .1.3.6.1.4.1.800.2.11.2.1.1.5 |
dsx3PortConfigFEACThis object indicates the presence FEAC being received by
this port. This object only applies to DS3 interface with
framing format configured to C-bit parity. A value of
dsx3NoFEAC(1) is returned for other cases.ro Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.6 |
dsx3PortConfigNatUseThe object indicates current state of National Use Bit
which is bit 12 of G.751 frame. This object only applies
to E3 port which line framimg is configured to G.751. A value
of one(1) is returned for other sublayers or DS3 port.ro Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.7 |
dsx3PortConfigRxPayloadTypeThe object indicates current state of payload type bits
(bit 3,4,5 of Maintenance and Adaptation byte) of an E3
G.832 frame. This objects only applies to E3 port which
framing is configured to G.832. A value of 1 is returned
for all other cases.ro Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.8 |
dsx3PortConfigTimeMarkerThe object indicates current state of Timing Marker bit
(bit 8 of Maintenanc and Adaptation byte) of an E3 G.832
frame. This objects only applies to E3 port which
framing is configured to G.832. A value of one(1) is returned
for other cases.ro Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.9 |
dsx3PortConfigTxPayloadTypeThe object reflects the value to be inserted in the payload
type bits (bit 3,4,5 of Maintenance and Adaptation byte) of
an E3 G.832 frame. This objects only applies to E3 port
whose framing is configured as G.832. Additionally if this
object is not applicable, i.e. not E3 G.832, writing to this
object will be silently ignored.rw Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.10 |
dsx3PortConfigExpectedPayloadTypeThe object indicates the current expected payload type bits
(bit 3,4,5 of Maintenance and Adaptation byte) of an E3
G.832 frame. This objects only applies to E3 port whose
framing is configured as G.832. Additionally if this
object is not applicable, i.e. not E3 G.832, writing to
this object will be silently ignored.rw Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.11 |
dsx3PortConfigTxTrailTraceIDThe object indicates the characters to be inserted as Trail
Trace Identifier of an E3 G.832 frame. This object only
applies to E3 port whose framing is configured as G.832.
A binary 0 in the first octet indicates all zeros insertion,
or this port is not configured as E3 G.832 framing.
Additionally if this object is not applicable, i.e. not E3
G.832, writing to this object will be silently ignored.rw DisplayString .1.3.6.1.4.1.800.2.11.2.1.1.12 |
dsx3PortConfigRxTrailTraceIDThe object indicates the current characters received as Trail
Trace Identifier of an E3 G.832 frame. This object only
applies to E3 port whose framing is configured as G.832.
A binary 0 in the first octet indicates all zeros insertion
received or this port is not configured as E3 G.832 framing.ro DisplayString .1.3.6.1.4.1.800.2.11.2.1.1.13 |
dsx3PortConfigExpectedTrailTraceIDThe object indicates the expected characters received as Trail
Trace Identifier of an E3 G.832 frame. This object only
applies to E3 port whose framing is configured as G.832.
A binary 0 in the first octet indicates all zeros insertion,
or this port is not configured as E3 G.832 framing.
Additionally if this object is not applicable, i.e. not E3
G.832, writing to this object will be silently ignored.rw DisplayString .1.3.6.1.4.1.800.2.11.2.1.1.14 |
dsx3PortConfigLineStatusThis object indicates the line status of a ds3/e3 interface.
Each bit position (bit-0 to bit-18) represents one failure
condition of the interface. Bit-19 and bit-20 are used to
represent Timing Marker bit and National Use bit. Note that
the SYNTAX type of Counter instead of INTEGER is used here
as there are more than 16 different conditions to represent.
The followings define the various bit position and their
meanings:
Bit Description
0: No alarm present
1: Out of Frame Alarm received
2: Loss Of Signal Alarm received
3: Alarm Indication Signal Alarm received
4: Red Alarm received
5: Far End Receive Failure Alarm received (Non E3 G.751 only)
Remote Alarm Indication Alarm received (E3 G.751 only)
6: Change Of Frame Alignment Alarm received
7: PLCP Out Of Frame Alarm received
8: PLCP Yellow Alarm received
9: PLCP Framing Bit Error Alarm received
10: PLCP Bit Interleaved Parity Error Alarm received
11: PLCP Loss Of Frames Alarm received
12: PLCP Far End Block Error Alarm received
13: Cell Loss Alarm received
14: Far End Block Error Alarm received
15: Parity Error Alarm received
16: Trail Trace ID Mismatch Alarm received (E3 G.832 only)
17: Rx Payload Type Mismatch Alarm received (E3 G.832 only)
18: Unequipped Payload Type received (E3 G.832 only)
19: Timing Marker Bit (bit 8 of the E3 G.832 Maintenance and
Adaptation bye) received.
20: National Use bit (bit 12 of the frame in a E3 G.751 frame)
received.ro INTEGER .1.3.6.1.4.1.800.2.11.2.1.1.15 |
dsx3PortConfigPlScramblePayload Scrambling Enable.rw Enumeration .1.3.6.1.4.1.800.2.11.2.1.1.16 |
dsx3PortStatsTableA table of DS3/E3 physical port statistics. SEQUENCE OF Dsx3PortStatsEntry .1.3.6.1.4.1.800.2.11.2.2 |
dsx3PortStatsEntryAn entry in the table, containing information about
the physical port statistics of a DS3/E3 interface. Dsx3PortStatsEntry .1.3.6.1.4.1.800.2.11.2.2.1 |
dsx3PortStatsSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.11.2.2.1.1 |
dsx3PortStatsPortIndexA unique value which identifies this port.ro INTEGER .1.3.6.1.4.1.800.2.11.2.2.1.2 |
dsx3PortStatsLossOfSignalTotal number of Loss of Signals that have been detected on
this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.3 |
dsx3PortStatsOutOfFrameTotal number of Out of Frames that have been detected on this
port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.4 |
dsx3PortStatsAISEventTotal number of AIS events that have been detected on this
port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.5 |
dsx3PortStatsRedAlarmEventTotal number of Red Alarm events that have been detected on
this port. This object only applies to DS3 interface.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.6 |
dsx3PortStatsFarEndReceiveErrorTotal number of Far-end Receive Error events that have been
received on this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.7 |
dsx3PortStatsFarEndBlkErrorTotal number of Far-end Block Error events that have been
received on this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.8 |
dsx3PortStatsLineCodeVioEventTotal number of Line Code Violation events that have been
received on this port. This is a count of both Bipolar
Violation (BPV) and Excessive zeros (EXZs).ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.9 |
dsx3PortStatsFramingBitErrorTotal number of Framing Bit Error events that have been
detected on this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.10 |
dsx3PortStatsChangeOfFrameAlignTotal number of Change of Frame Alignment events that have
been detected on this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.11 |
dsx3PortStatsParityBitErrorTotal number of parity bit errors that have been detected on
this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.12 |
dsx3PortStatsPathParityBitErrorTotal number of path parity bit errors that have been
detected on this port.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.13 |
dsx3PortStatsPlcpLossOfFrameTotal number of PLCP loss of frame events that have been
detected on this port. A value of zero is returned if
port sublayer is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.14 |
dsx3PortStatsPlcpOutOfFrameTotal number of PLCP out of frame events that have been
detected on this port. A value of zero is returned if
port sublayer is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.15 |
dsx3PortStatsPlcpYellowAlarmTotal number of PLCP Yellow Alarms that have been detected
on this port. A value of zero is returned if port sublayer
is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.16 |
dsx3PortStatsPlcpFarEndBlkErrorTotal number of PLCP Far-end Block Errors that have been
detected on this port. A value of zero is returned if port
sublayer is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.17 |
dsx3PortStatsPlcpFramingErrorTotal number of PLCP Framing Octet Errors that have been
detected on this port. A value of zero is returned if port
sublayer is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.18 |
dsx3PortStatsPlcpBIPErrorTotal number of PLCP Bit Interleaved Parity Errors that have
been detected on this port. A value of zero is returned if
port sublayer is not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.19 |
dsx3PortStatsPayloadTypeMismatchErrorTotal number of payload type mismatch failure that have
been detected on this port. This object is applicable to
E3 G.832 only. A value of zero is returned if the port is
not configured as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.20 |
dsx3PortStatsUnequippedErrorTotal number of unequipped failure that have
been detected on this port. This object is applicable to
E3 G.832 only. A value of zero is returned if the port is
not configured as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.21 |
dsx3PortStatsTrailTraceIDMismatchErrorTotal number of trail trace identification mismatch
failure that have been detected on this port. This
object is applicable to E3 G.832 only. A value of zero
is returned if the port is not configured as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.2.1.22 |
dsx3PortIntervalTableA table of DS3/E3 physical port statistics. SEQUENCE OF Dsx3PortIntervalEntry .1.3.6.1.4.1.800.2.11.2.3 |
dsx3PortIntervalEntryAn entry in the table, containing information about
the physical port statistics of a DS3/E3 interface. Dsx3PortIntervalEntry .1.3.6.1.4.1.800.2.11.2.3.1 |
dsx3PortIntervalSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.11.2.3.1.1 |
dsx3PortIntervalPortIndexA unique value which identifies this port.ro INTEGER .1.3.6.1.4.1.800.2.11.2.3.1.2 |
dsx3PortIntervalClearThis object allows clearing all interval statistics of this
port to value of zero. Setting this object to clearRequest
will initiate managed entity to clear the statistics of
this table.rw Enumeration .1.3.6.1.4.1.800.2.11.2.3.1.3 |
dsx3PortIntervalLastClearThe value of MIB II's sysUpTime object at the time this
table statistics is cleared.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.800.2.11.2.3.1.4 |
dsx3PortIntervalLossOfSignalTotal number of Loss of Signals that have been detected on
this port since it's cleared by the managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.5 |
dsx3PortIntervalOutOfFrameTotal number of Out of Frames that have been detected on
this port since it's cleared by the managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.6 |
dsx3PortIntervalAISEventTotal number of AIS events that have been detected on this
port since it's cleared by the managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.7 |
dsx3PortIntervalRedAlarmEventTotal number of Red Alarm events that have been detected on
this port since it's cleared by the managing station. This
object only applies to DS3 interface.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.8 |
dsx3PortIntervalFarEndReceiveErrorTotal number of far-end receive error events that have
been received on this port since it's cleared by the
managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.9 |
dsx3PortIntervalFarEndBlkErrorTotal number of far-end block error events that have been
received on this port since it's cleared by the managing
station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.10 |
dsx3PortIntervalLineCodeVioEventTotal number of line code violation events that have been
received on this port. This is a count of both Bipolar
Violation (BPV) and Excessive zeros (EXZs) since it's
cleared by the managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.11 |
dsx3PortIntervalFramingBitErrorTotal number of Framing Bit Error events that have been
detected on this port since it's cleared by the managing
station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.12 |
dsx3PortIntervalChangeOfFrameAlignTotal number of change of frame alignment events that have
been detected on this port since it's cleared by the managing
station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.13 |
dsx3PortIntervalParityBitErrorTotal number of parity bit errors that have been detected on
this port since it's cleared by the managing station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.14 |
dsx3PortIntervalPathParityBitErrorTotal number of path parity bit errors that have been
detected on this port since it's cleared by the managing
station.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.15 |
dsx3PortIntervalPlcpLossOfFrameTotal number of PLCP loss of frame events that have been
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.16 |
dsx3PortIntervalPlcpOutOfFrameTotal number of PLCP out of frame events that have been
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.17 |
dsx3PortIntervalPlcpYellowAlarmTotal number of PLCP Yellow Alarms that have been detected
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.18 |
dsx3PortIntervalPlcpFarEndBlkErrorTotal number of PLCP Far-end Block Errors that have been
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.19 |
dsx3PortIntervalPlcpFramingErrorTotal number of PLCP Framing Octet Errors that have been
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.20 |
dsx3PortIntervalPlcpBIPErrorTotal number of PLCP Bit Interleaved Parity Errors that have
detected on this port since it's cleared by the managing
station. A value of zero is returned if port sublayer is
not PLCP.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.21 |
dsx3PortIntervalPayloadTypeMismatchErrorTotal number of payload type mismatch failure that have
been detected on this port since it's cleared by the managing
station. This object is applicable to E3 G.832 only. A value of
zero is returned if the port is not configured as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.22 |
dsx3PortIntervalUnequippedErrorTotal number of unequipped failure that have
been detected on this port sinece it's cleared by the managing
station. This object is applicable to E3 G.832 only.
A value of zero is returned if the port is not configured
as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.23 |
dsx3PortIntervalTrailTraceIDMismatchErrorTotal number of trail trace identification mismatch
failure that have been detected on this port since
it's cleared by the managing station. This
object is applicable to E3 G.832 only. A value of zero
is returned if the port is not configured as E3 and G.832.ro Counter .1.3.6.1.4.1.800.2.11.2.3.1.24 |