XYLAN-BACKUP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-BACKUP-MIB.
18
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
backupxConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.16.1 |
IMPORTS Unknown .1.3.6.1.4.1.800.2.16.1 |
backupxConfigTableA table of Backup Services configuration information. SEQUENCE OF BackupxConfigEntry .1.3.6.1.4.1.800.2.16.1.1 |
backupxConfigEntryAn entry in the Backup Service Entity Configuration table,
containing information about a backup service. BackupxConfigEntry .1.3.6.1.4.1.800.2.16.1.1.1 |
backupxConfigIDThe Backup Service ID. This is used as a unique
ID to identify a backup service entity.ro INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.1 |
backupxConfigDescriptionA description for this Backup Service.rw DisplayString .1.3.6.1.4.1.800.2.16.1.1.1.2 |
backupxConfigAdminStatusThis object controls the Administrative Status
of this Backup Service. Enabled will allow the
Backup Service to operate. Disabled will
disable the service without deleting it.
Delete will disable the backup and delete
the backup service configuration record.rw Enumeration .1.3.6.1.4.1.800.2.16.1.1.1.3 |
backupxConfigPrimaryTypeThis object controls the type of entity to
be backed up in case of failure.rw Enumeration .1.3.6.1.4.1.800.2.16.1.1.1.4 |
backupxConfigPrimaryIndex1This object controls the first Index object
to use to identify the Primary entity to backup
based on type:
Physical Port: slot
Frame Relay PVC: slotrw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.5 |
backupxConfigPrimaryIndex2This object controls the first Index object
to use to identify the Primary entity to backup
based on type:
Physical Port: port
Frame Relay PVC: portrw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.6 |
backupxConfigPrimaryIndex3This object controls the first Index object
to use to identify the Primary entity to backup
based on type:
Physical Port: 0
Frame Relay PVC: DLCI numberrw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.7 |
backupxConfigBackupTypeThis object controls the type of entity to
use to back up the primary entity in case of failure.rw Enumeration .1.3.6.1.4.1.800.2.16.1.1.1.8 |
backupxConfigBackupIndex1This object controls the first Index object
to use to identify the backup entity based on type:
PPP Peer: Peer IDrw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.9 |
backupxConfigBackupIndex2This object controls the second Index object
to use to identify the backup entity:
This object is currently reserved for possible
future use.rw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.10 |
backupxConfigBackupIndex3This object controls the third Index object
to use to identify the backup entity:
This object is currently reserved for possible
future use.rw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.11 |
backupxConfigStartupTimeoutThis object controls the time in seconds
after system startup to wait for the Primary
entity to come up before activating the
backup entity.rw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.12 |
backupxConfigActivateTimeoutThis object controls the time in seconds
after the Primary entity enters and stays
in a Failed state before activating the
backup entity.rw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.13 |
backupxConfigRestoreTimeoutThis object controls the time in seconds
after the Primary entity enters and stays
in a Operational state before deactivating the
backup entity.rw INTEGER .1.3.6.1.4.1.800.2.16.1.1.1.14 |