XYLAN-ASCONFIG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-ASCONFIG-MIB.
28
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
ascfgControl OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.21.1 |
IMPORTS Unknown .1.3.6.1.4.1.800.2.21.1 |
ascfgInputFileNameThe name of the configuration file to be
read by the device. The file specified
should be present on the device.rw DisplayString .1.3.6.1.4.1.800.2.21.1.1 |
ascfgActionDetermines whether or not configuration
values in ascfgInputFile will be applied
to current device configuration. A value of
checkSyntax causes ascfgInputFile to be
checked for syntax, with no changes to the
device configuration. A value of checkSyntaxAndApply
also causes ascfgInputFile to be checked for
syntax. In addition, all commands free of
syntax errors are applied to device configuration.
Setting this object causes ascfgInputFile
to be processed in the manner specified.rw Enumeration .1.3.6.1.4.1.800.2.21.1.2 |
ascfgErrorFileNameThe name of the file which contains the
error messages is automatically generated by the device.ro DisplayString .1.3.6.1.4.1.800.2.21.1.3 |
ascfgStatusStatus of current (if in progress) or
most recent application of ASCII configuration
data to the device.ro Enumeration .1.3.6.1.4.1.800.2.21.1.4 |
ascfgErrorsNumber of errors found in most recent
application of ASCII configuration file
to the device. This object is meaningful
only in cases where ascfgStatus has a value
of completeErrors.ro INTEGER .1.3.6.1.4.1.800.2.21.1.5 |
ascfgTimerFileNameThe name of the configuration file to be
read later by the device. The file specified
should be present on the device.rw DisplayString .1.3.6.1.4.1.800.2.21.1.6 |
ascfgTimerFileTimeThe (local)time when the configuration
file will read by the device.
The following formats are valid:
YY/MM/DD hh:mm
MM/DD hh:mm - uses current year if
after current date and time,
next year otherwise.
hh:mm - uses today's date if later
than current time,
tommorow's date otherwise.
where
YY - year (0-38,99)
MM - month (1-12)
DD - day (1-31)
hh - hour (0-23)
mm - minute (0-59)rw DisplayString .1.3.6.1.4.1.800.2.21.1.7 |
ascfgTimerFileStatusThe current status of the ASCII configuration timer.ro Enumeration .1.3.6.1.4.1.800.2.21.1.8 |
ascfgTimerClearA set of this object causes the ASCII
configuration timer to be cleared.rw INTEGER .1.3.6.1.4.1.800.2.21.1.9 |
ascfgSnapshotFileNameThe name of the configuration snapshot
file to be produced by the device. The file specified should not be present on
the device.rw DisplayString .1.3.6.1.4.1.800.2.21.1.10 |
ascfgSnapshotInitiateA set of this object causes a configuration
snapshot to be generated by the device,
provided that object ascfgSnapshotFileName
has been set.rw INTEGER .1.3.6.1.4.1.800.2.21.1.11 |
ascfgSnapshotIpSelectThe value of this object determines whether
or not IP configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.12 |
ascfgSnapshotIpxSelectThe value of this object determines whether
or not IPX configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.13 |
ascfgSnapshotSystemSelectThe value of this object determines whether
or not system configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.14 |
ascfgSnapshotSnmpSelectThe value of this object determines whether
or not SNMP configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.15 |
ascfgSnapshotAtmSelectThe value of this object determines whether
or not ATM configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.16 |
ascfgSnapshotVlanSelectThe value of this object determines whether
or not group/VLAN configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.18 |
ascfgSnapshotInterfaceSelectThe value of this object determines whether
or not interface configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.19 |
ascfgSnapshotBrdgSelectThe value of this object determines whether
or not bridging configuration data is included
in the snapshot to be generated by the device.
Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.20 |
ascfgSnapshotAllSelectThe value of this object determines whether
or not all configuration data is included
in the snapshot to be generated by the device.
Setting this object is equivalent to setting
all the individual snapshot select objects
to the same value. Default is excludeFromSnapshot.rw AscSnapshotAction .1.3.6.1.4.1.800.2.21.1.21 |
ascfgSnapshotSelectSummaryThis object is a bit mask which represents
the current state of the snapshot select
objects. Each selection object is represented
by a single bit. The mapping between selection
objects and mask bits is as follows:
IP 0x001
IPX 0x002
SYSTEM 0x004
SNMP 0x008
ATM 0x010
VLAN 0x040
INTERFACE 0x080
BRIDGING 0x100
ALL 0xffffffff.ro INTEGER .1.3.6.1.4.1.800.2.21.1.22 |
ascfgCommandStrThis object is to be interpreted as a text-based
configuration command and executed.rw DisplayString .1.3.6.1.4.1.800.2.21.1.23 |
ascfgCommandStatusThis object contains the completion status
of ascfgCommandStr as a text-based configuration
command.ro Enumeration .1.3.6.1.4.1.800.2.21.1.24 |
ascfgSaveConfigurationThis object triggers the process of
saving the configuration info to
the cache. It is applicable
when the device is in the cache-only mode.rw INTEGER .1.3.6.1.4.1.800.2.21.1.25 |
ascfgConfigurationFileNameThe name of the ASCII configuration file to be
used by the device to boot.
* If a NULL string is passed, that signifies
the switch will be booted up using the conventional
mpm.cnf file in the flash;
** If a non-NULL string is passed in, and the file is
present on the device, then the switch/device will
booted up in the cache-only mode, *and* the
specified will be used to boot up the device.rw DisplayString .1.3.6.1.4.1.800.2.21.1.26 |
ascfgCacheOnlyThis object is the flag for the device
to toggle its configuration mode. When it
is set to TRUE, all the subsequent configuration
info is stored in the cache only; when is
set to FALSE, the device will sync up the
cache and the flash, and subsequent config info
is stored in both.rw Enumeration .1.3.6.1.4.1.800.2.21.1.27 |