XEROX-PRINTER-EXT-MIB
Version: 2.36.pub
Xerox Printer MIB Extensions Module. This Module provides extension to the IETF Printer MIB.
Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
Main OID:
xcmPrintMIB.1.3.6.1.4.1.253.8.55
128
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
128 total| Object Name |
|---|
xcmPrintMIBVersion: 2.36.pub
Xerox Printer MIB Extensions Module.
This Module provides extension to the IETF Printer MIB.
Copyright (C) 1997 Xerox Corporation. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.253.8.55 |
xcmPrtBase OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.1 |
xcmPrtBaseTableA table of general counters and information for ease of use of
the XCMI Printer MIB Extensions Module and the
IETF Printer MIB (RFC 1759) on this host system.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1'). SEQUENCE OF XcmPrtBaseEntry .1.3.6.1.4.1.253.8.55.1.2 |
xcmPrtBaseEntryAn entry of general counters and information for ease of use of
the XCMI Printer MIB Extensions Module and the
IETF Printer MIB (RFC 1759) on this host system.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1'). XcmPrtBaseEntry .1.3.6.1.4.1.253.8.55.1.2.1 |
xcmPrtBaseIndexA unique value used by this host system to identify this
conceptual row in the 'xcmPrtBaseTable'.
Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1'). Ordinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.1.2.1.1 |
xcmPrtBaseRowStatusThis object is used to display status of the ONLY valid
conceptual row in the 'xcmPrtBaseTable'.
Usage: 'xcmPrtBaseRowStatus' is 'read-only' because
the ONLY valid conceptual row shall NOT be deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.1.2.1.2 |
xcmPrtBaseGroupSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.ro XcmPrtGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.3 |
xcmPrtBaseUpdateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.ro XcmPrtGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.4 |
xcmPrtBaseCreateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.ro XcmPrtGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.5 |
xcmPrtBaseIETFMIBGroupSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
which are supported by this management agent
implementation (ie, version) on this host system,
specified in a bit-mask.ro XcmPrtIETFPrintMIBGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.6 |
xcmPrtBaseIETFMIBUpdateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.ro XcmPrtIETFPrintMIBGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.7 |
xcmPrtBaseIETFMIBCreateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Currently there are no groups within the IETF Printer MIB which
provide for dynamic row creation, and this object shall always
return '0'. Dynamic row creation is provided to these groups
through the XCMI Printer MIB Extensions Module, but
CreateSupport should be reflected in xcmPrtBaseCreateSupport.
This object is included for completeness.ro XcmPrtIETFPrintMIBGroupSupport (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.1.2.1.8 |
xcmPrtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.2 |
xcmPrtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.2.2 |
xcmPrtGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.5 |
xcmPrtGeneralTableA table of general information per printer.
This table augments the prtGeneralTable. SEQUENCE OF XcmPrtGeneralEntry .1.3.6.1.4.1.253.8.55.5.1 |
xcmPrtGeneralEntryAn entry exists in this table for each device entry in the
hostmib device table whose type is printer. XcmPrtGeneralEntry .1.3.6.1.4.1.253.8.55.5.1.1 |
xcmPrtGeneralRowStatusManages the status of this conceptual row in the
xcmPrtGeneralTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.5.1.1.1 |
xcmPrtGeneralAuxSheetPackageThis object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets at the printer box level.
The value zero shall mean not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.5.1.1.2 |
xcmPrtGeneralManualFeedTimeoutThe duration in seconds after which the printer shall either:
(a) switch to another input subunit, if the value of
prtInputNextIndex is non-zero and prtGeneralAutoSwitch is on
or
(b) abort any job waiting for manually fed input, if the value
value of prtInputNextIndex is zero or prtGeneralAutoSwitch
is off or notPresent.
The event which causes the printer to enter the waiting state
is product specific.
A value of (-1) implies 'other' or 'infinite' which translates
to 'this input subunit doesn't support manual feed'.
A value of (-2) implies 'unknown'.rw Integer32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.5.1.1.3 |
xcmPrtGeneralInputAutoSwitchIndicates the state of the auto input switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.4 |
xcmPrtGeneralOutputAutoSwitchIndicates the state of the auto output tray switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.5 |
xcmPrtGeneralMediumClassDefaultThis object sets the default medium size class for the printer.
This object sets the medium size for printer management
functions such as printing the configuration sheet.
It may affect any media related object, such as form length.rw XcmPrtMediumClassType (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.5.1.1.6 |
xcmPrtGeneralDarknessLevelsThis value indicates the maximum number of darkness levels
supported by this printer.
The level settings range from 1 to xcmPrtGeneralDarknessLevels
where 1 represents the lightest level and
xcmPrtGeneralDarknessLevels represents the darkest level.
The value 1 implies no user settables.
The value 0 means unspecified.
The selection of a darkness levels specifies that the
printer shall process the page images so that they appear
either 'lighter' or 'darker'.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.5.1.1.7 |
xcmPrtGeneralDarknessLevelNormThe normal setting for the darkness printing object.
The value 0 means unspecified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.5.1.1.8 |
xcmPrtGeneralDarknessLevelDfltThe default setting for the density printing option.
The value (-2) indicates unknown.
The value (-4) indicates the auto setting.rw Integer32 .1.3.6.1.4.1.253.8.55.5.1.1.9 |
xcmPrtGeneralHexDumpEnableThis object controls whether the printer is in a special
diagnostic mode wherein all received print data is printed in
hexadecimal format.
Whether a reset or power-cycles turns xcmPrtGeneralHexDumpEnable
to Off is product dependent.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.10 |
xcmPrtGeneralStartupPageUsed to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test patterns and/or printer configuration
information.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.11 |
xcmPrtGeneralBannerPageUsed to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.12 |
xcmPrtGeneralScanlineCompactionThis object enables a printing mode wherein the printer
compresses selected scanlines of raster image data as they are
received and holds them in compressed form until they are to
be printed. This allows particular jobs to be processed with
less memory, but often reduced performance as well.
On some Printers, turning this feature Off is referred to as
'PerformanceEnhancement'.
When xcmInterpPageProtect is set to Off,
some complex jobs may not print successfully with minimum
memory. The ScanlineCompaction feature enables printing some
complex jobs without resorting to reserving additional memory
by turning on the PageProtect option or installing additional
memory.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.5.1.1.50 |
xcmPrtInput OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.8 |
xcmPrtInputTableThis table logically augments the Printer MIB's prtInputTable. SEQUENCE OF XcmPrtInputEntry .1.3.6.1.4.1.253.8.55.8.1 |
xcmPrtInputEntryEntries may exist for each entry in the prtInputTable. XcmPrtInputEntry .1.3.6.1.4.1.253.8.55.8.1.1 |
xcmPrtInputRowStatusManages the status of this conceptual row
in the xcmPrtInputTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.8.1.1.1 |
xcmPrtInputNextPrtInputIndexThe value of prtInputIndex corresponding to the input subunit
which will be used when this input subunit is emptied.
The value of zero indicates that auto input switching will not
occur when this input subunit is emptied.
Two different mechanisms for input tray switching,
xcmPrtNextPrtInputIndex and xcmPrtInputAliasGroup, are provided.
A device agent may make use of one or the other, none, or both.
Use the model that fits best for the given application.rw Integer32 .1.3.6.1.4.1.253.8.55.8.1.1.2 |
xcmPrtOutput OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.9 |
xcmPrtOutputTableThis table logically augments the prtOutputTable in the
Printer MIB. SEQUENCE OF XcmPrtOutputEntry .1.3.6.1.4.1.253.8.55.9.1 |
xcmPrtOutputEntryEntries may exist for each entry in the prtOutputTable. XcmPrtOutputEntry .1.3.6.1.4.1.253.8.55.9.1.1 |
xcmPrtOutputRowStatusManages the status of this conceptual row in the
xcmPrtOutputTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.9.1.1.1 |
xcmPrtOutputNextIndexThe value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will not
occur when this output subunit is filled.rw Integer32 .1.3.6.1.4.1.253.8.55.9.1.1.2 |
xcmPrtOutputPasswordThis object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray.rw OCTET STRING .1.3.6.1.4.1.253.8.55.9.1.1.3 |
xcmPrtOutputOffsetStackingTypeThis object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.rw XcmPrtOutputOffsetStackingType (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.9.1.1.4 |
xcmPrtOutputTrayTimeoutSupportDetermines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
'On' indicates that would should wait as specified by
xcmPrtOutputTrayTimeout.
'Off' indicates this feature is off and should immediately
seek to send the printed output to another destination.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.9.1.1.5 |
xcmPrtOutputTrayTimeoutDetermines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.
A value of (0) implies 'other' or 'infinite' which translates
to this input subunit does not support this feature.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.9.1.1.6 |
xcmPrtChannel OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.14 |
xcmPrtChannelTableThis table logically augments Printer MIB's prtChannelTable. SEQUENCE OF XcmPrtChannelEntry .1.3.6.1.4.1.253.8.55.14.1 |
xcmPrtChannelEntryAn entry exists corresponding to each entry in the
prtChannelTable. XcmPrtChannelEntry .1.3.6.1.4.1.253.8.55.14.1.1 |
xcmPrtChannelRowStatusManages the status of this conceptual row in the
xcmPrtChannelTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.14.1.1.1 |
xcmPrtChannelEOJTimeoutDefines the number of seconds that the channel waits before
timing out. For example, this may be used for the parallel
channel.
The value zero means infinite or no timeout on the channel.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.14.1.1.2 |
xcmPrtChannelAuxSheetPackageThis object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this channel.
The value zero shall mean not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.14.1.1.3 |
xcmPrtChannelSpoolingEnableThis object controls spooling to a large data store such as a
hard disk.
When set to On, data received and waiting to be processed from
any port is spooled onto the large data store and later
retrieved for processing. This allows the printer to receive
the data more rapidly, thus freeing the data source sooner.
It may also increase throughput by having the next job's print
data already local for processing.
When set to Off, the spooling feature is disabled.
Data received is not spooled to the large data store, and is
accepted by the printer only as needed for printing.
You may want to disable this spooling feature if spooling is
already done outside the printer; having the spooling done on
the printer as well, may not add value, and may create error
recovery and queue monitoring difficulties.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.14.1.1.4 |
xcmPrtChannelLangSensingThis object indicates whether the channel supports detection of
the input PDL language type, and if so, whether the feature is
enabled.
Currently, the prtChannelDefaultPageDescLangIndex points to the
Page Description Language Interpreter for this channel. One of
the PDL types enumerated in the prtInterpreterLangFamily object
is langAutomatic(37), to be used for automatic PDL sensing;
however, if the language sensing fails there is no fallback
language for the channel.
Conforming implementations shall use xcmPrtChannelLangSensing
for each channel and deprecate use of the langAutomatic(37) enum
in favor of the literal default language in the
prtInterpreterLangFamily object.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.14.1.1.5 |
xcmPrtChannelAutoJobEndControls automatic ending of a print job that does not finish
printing.
When 'On', after the current print job has paused long enough
to exceed the xcmPrtChannelEOJTimeout interval,
the current print job will be stopped.
When 'Off', the print job does not end after the timeout
interval. Instead, the printer waits to continue until another
print job is received on any port. A partial page will remain
unprinted until the next print job is received. The current
job will then be stopped.
The value 'other' shall indicate not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.14.1.1.80 |
xcmPrtInterpreter OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.15 |
xcmPrtInterpreterTableThis table logically augments the Printer MIB's
prtInterpreterTable. SEQUENCE OF XcmPrtInterpreterEntry .1.3.6.1.4.1.253.8.55.15.1 |
xcmPrtInterpreterEntryAn entry exists corresponding to each entry in the
prtInterpreterTable. XcmPrtInterpreterEntry .1.3.6.1.4.1.253.8.55.15.1.1 |
xcmPrtInterpRowStatusManages the status of this conceptual row in the
xcmPrtInterpreterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.15.1.1.1 |
xcmPrtInterpAuxSheetPackageThis object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this interpreter.
The value zero shall mean not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.2 |
xcmPrtInterpContextSavingEnables reserving memory for saving permanently downloaded fonts
and macros, when the printer switches between this and another
interpreter. The effect is to save the memory for a subsequent
job using this interpreter.
When set to Off, all permanently downloaded fonts and macros are
cleared from memory when switching PDLs. They must be
downloaded again when the printer switches back to using the
current PDL.
When set to On, permanently downloaded fonts and macros are
stored in printer memory. You eliminate the time to download
them again when the printer switches back to the current PDL.
In PCL, this is referred to as Resource Savings.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.3 |
xcmPrtInterpEdgeEnhancementSpecifies whether the printer should perform EdgeEnhancement of
the image of the printed document for this interpreter.
interpreter.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.4 |
xcmPrtInterpFontIndexDefaultThe value of xcmFontIndex corresponding to the xcmFontEntry
which represents the default font for this Interpreter.
A value of (-1) means 'other'.
A value of (-2) means 'unknown'.
A value of (-3) means 'notPresent'.
A value of 'other' (-3) should be used for those
interpreters which have no default font (e.g. PostScript).
For agents that choose not to implement the Resources MIB,
this object specifies the ID of the default font. This use
of this object is significant only to the specific product.rw Integer32 .1.3.6.1.4.1.253.8.55.15.1.1.5 |
xcmPrtInterpGrayLevelsThis object describes the gray levels supported by this
interpreter. This may represent gray levels within a color
plane.
The value zero means not specified for this interpreter.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.6 |
xcmPrtInterpGrayLevelDefaultThis object controls the number of gray scales for this
interpreter.
The value zero means not specified for this interpreter.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.7 |
xcmPrtInterpJamRecoveryThis object controls how the printer recovers from a paper jam.
When set to On, the printer reprints any pages in the printer at
the time of the jam, after the jam has been cleared. The
printer does this by using a portion of memory to store print
data. This may slow throughput.
When set to Off, some pages may be lost after the jam has been
cleared. The print job must be re-sent, specifying those pages
that did not print as a result of the paper jam.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.8 |
xcmPrtInterpJobCopiesDefaultThis defines the default number of job copies to be printed
by this interpreter.
If set incorrectly, this object may cause difficulties at
customer sites. Agent developers should consider making this
object read-only, permanently set to one copy.rw Ordinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.9 |
xcmPrtInterpLineWrapThis object controls whether long lines are wrapped or
truncated.
If On, long lines wrap to the next line.
If Off, long lines are truncated.
Note the meaning of 'long' depends on the orientation and the
current page size.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.10 |
xcmPrtInterpMediumSizeDefaultThis object specifies the default medium size for an
interpreter. It is used if no medium size is specified.
For PCL, this object sets the General PJL Environment variable
'Paper'.
The xcmPrtInterpMediumSizeDefault object may be affected by
setting the xcmPrtGeneralMediumClassDefault object.rw XcmPrtMediumSize (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.11 |
xcmPrtInterpPageProtectThis object enables reserving sufficient memory for printing
complex pages, thus avoiding Page Too Complex errors.
The amount of memory reserved is implementation specific.
When this feature is turned on, printer performance may
be slowed.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.12 |
xcmPrtInterpPageProtectSizeThis object sets the PageSize to be used by this interpreter
in reserving sufficient memory for printing complex pages,
thus avoiding Page Too Complex Errors.
The actual amount of memory to be reserved as a function of the
specified page size is implementation specific. When this
feature is turned on, printer performance may be slowed.
In PCL, this object supports the General PJL Environment
Variable 'PAGEPROTECT'. This object the sets the page
protection configuration.
The page protection feature reserves a block of printer memory
to prevent printer overrun errors when formatting very dense
or complex images. This variable may be set to any legal
value at any time, regardless of the current amount of free
memory or the currently set resolution.
When a job is sent, if there is not enough memory to print
correctly with the current resolution and page protection
configuration, the system temporarily overrides the resolution
and/or page protect values to run the job.
When the page protection status is changed, memory may be
reconfigured, and all downloaded fonts, PCL macros, and
PostScript dictionaries may be lost.
The value notSpecified shall also mean Off.rw XcmPrtMediumSize (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.13 |
xcmPrtInterpPageSizeErrorPolicyControls interpreter behavior when the requested Page Size
is not currently available.rw XcmPrtPageSizeErrorPolicy (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.14 |
xcmPrtInterpPlexSupportedThis object specifies the Plex modes supported by this
interpreter. These Plex modes specify the relative
orientations between consecutive pages, and capabilities of
printing one-side, two-sided or both.rw XcmPrtPlex (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.15 |
xcmPrtInterpPlexDefaultThis object specifies the default plex for this interpreter.
The device shall set no more than one bit.
The value zero shall indicate not specified.rw XcmPrtPlex (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.16 |
xcmPrtInterpPrintEdgeToEdgeEnables edge to edge printing for interpreters that try to
enforce a coordinate system that is offset from the edge of the
paper, e.g., PCL.
When On, jobs are printed to the edge of the paper.
When Off, jobs are printed in normal printable area of page.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.17 |
xcmPrtInterpPrintQualitySets the default output quality of the printed document for this
interpreter. Some printers have programmatically controlled
output quality.rw XcmPrtPrintQuality (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.18 |
xcmPrtInterpPrtInputIndexDfltSets the default input source for the interpreter.
It is the index to the prtInputGroup.
The value zero means not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.19 |
xcmPrtInterpPrtOutputIndexDfltThe value of the index of the default Output bin for this
interpreter. If specified, this object overrides the box level
object prtOutputDefaultIndex.
The value zero means unspecified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.20 |
xcmPrtInterpResFeedDirDefaultThis object specifies for this interpreter, the default
resolution in the Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.
A related object is the Printer MIB
prtInterpreterFeedAddressability object which describes the
maximum interpreter addressability in the feed direction.
The value zero shall mean not specified.
If this object has a value other than unspecified, this object
takes precedence over xcmPrtInterpFeedResIndexDefault.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.21 |
xcmPrtInterpResXFeedDirDefaultThis object specifies for this interpreter, the default
resolution in the Cross Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.
A related object is the Printer MIB
prtInterpreterFeedAddressability object which describes the
maximum interpreter addressability in the cross feed direction.
The value zero means unspecified.
If this object has a value other than unspecified, this object
takes precedence over xcmPrtInterpFeedResIndexDefault.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.22 |
xcmPrtInterpResIPResIndexThis object shall provide an index into the xcmIPResTable.
The xcmIPResTable shall be used to list available resolutions
supported by this interpreter. Each row includes objects
for Feed Resolution (pixels per inch), XFeed Resolution
(pixels per inch), Bits Per Pixel Supported, and Number of
Color Planes Supported.
The value zero means unspecified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.23 |
xcmPrtInterpResIPResIndexDfltThis object which is a pointer into the xcmIPResTable sets the
print resolution for this interpreter.
The value zero means unspecified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.24 |
xcmPrtInterpTextFormLengthThis object sets the maximum number of lines per page for a text
file that is being printed using this interpreter.
For PCL Interpreters, this object provides the General PJL
Environment Variable FORMLINES. This variable is tied to both
the PJL Environment Variables PAPER and ORIENTATION. If the
value of either of those variables is changed, then the
FORMLINES variable automatically is updated to maintain the
same line spacing.
The value zero means not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.25 |
xcmPrtInterpTimeoutJobThis object sets how long printer will wait for correct end of
job from the interpreter.
This setting lets you adjust how long the printer will wait to
receive the data it needs to complete a job before terminating
it prematurely.
The value zero means infinite.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.15.1.1.26 |
xcmPrtInterpTimeoutPageThis object sets how long printer will wait for correct end of
page from the interpreter.
If, for example, a print job contains a page without the correct
end of page code, the job will stall. This setting lets you
adjust how long the printer will wait to receive the data it
needs to complete a page before terminating it prematurely.
The value zero means infinite.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.15.1.1.27 |
xcmPrtInterpInputAliasIndexDfltSets the default input tray alias for this interpreter.
It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table.
The value zero means 'not specified'.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.15.1.1.28 |
xcmPrtInterpTraySwitchThis object declares for this interpreter the tray switching
declaration mechanism used.
Note: The tray switching declaration mechanisms do not specify
how or when or whether a printer switches back to using an
earlier emptied tray after that tray is refilled.
For example, assume a printer is set up to first use
Tray 1, then when emptied Tray 2, then Tray 3.
If just after tray 1 becomes empty and the printer switches
to Tray 2, the operator refills Tray 1; the printer may
select which tray to pull the next sheet from using a variety
of algorithms:
- The printer may switch back immediately to use tray 1.
This may be particularly appropriate if tray 1 is the
high capacity feeder.
- The printer may pull sheets from tray 2 until it is
empty and then switch back to tray 1.
- The printer may pull sheets from tray 2 until it is
empty and then continue to tray 3, before switching
back to tray 1.
Again, implementation of how the input tray switching
programs behave when empty trays are refilled is considered
printer specific.rw XcmPrtTraySwitch (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.29 |
xcmPrtInterpMediumTypeDefaultSpecifies the paper type used to print a page if no paper
type is specified by the software application
Typical paper types could include Plain, Preprinted, etc.rw XcmFixedLocaleDisplayString .1.3.6.1.4.1.253.8.55.15.1.1.30 |
xcmPrtInterpMediaTypeErrPolicyControls interpreter behavior when the requested Media Type
is not currently available.rw XcmPrtMediaTypeErrorPolicy (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.31 |
xcmPrtInterpErrorPolicyTimeoutProvides the timeout for ErrorPolicy enumerations
requiring one, e.g. 'ignoreAfterTimeout'
The value zero shall mean infinite or not supported.rw Cardinal32 UNITS "Seconds" .1.3.6.1.4.1.253.8.55.15.1.1.32 |
xcmPrtInterpLineTermEnables adding a Carriage Return after every Line Feed.
The value 'On' indicates that a Carriage Return will be
added after every Line Feed.
Usage example: This is a useful feature when printing text
jobs via PCL through a standard queue in UNIX.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.33 |
xcmPrtInterpAutoContinueThis object controls whether the printer resumes printing after
a system error occurs.
When set to Off, the printer does not automatically resume.
Manual intervention must occur for the printer to resume.
When set to On, the printer automatically resumes operation
after certain system errors. The On setting is useful in a
networked environment.
The value 'other' shall mean not specified.rw PresentOnOff (Printer-MIB) .1.3.6.1.4.1.253.8.55.15.1.1.50 |
xcmPrtInterpEnvFeederSizeThis object informs the printer what size of envelope is
currently loaded in the envelope feeder. Because the input tray
feeding envelopes may not have a size sensor, this setting is
required so that the printer is able to know when the size of
envelope requested for printing is different than that loaded.
When the sizes do not match, and xcmPrtInterpPageSizeErrorPolicy
is set to Off, the printer displays a message asking for a
change of envelope size.
The XcmPrtPaperSize selected should be that of an envelope.rw XcmPrtMediumSize (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.51 |
xcmPrtInterpManualFeedPgSizeThis object sets the default medium size of the manual input
tray for this interpreter.rw XcmPrtMediumSize (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.52 |
xcmPrtInterpOffsetStackingTypeThis object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.
Printers who need to specify OffsetStackingType by
interpreter shall set this object to 'other'.
To specify OffsetStackingType by interpreter, use the
object xcmPrtOutputOffsetStackingType.rw XcmPrtOutputOffsetStackingType (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.15.1.1.53 |
xcmPrtInputAlias OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.50 |
xcmPrtInputAliasTableThis table defines one or more aliases for input sub-units
defined in the Input Group. SEQUENCE OF XcmPrtInputAliasEntry .1.3.6.1.4.1.253.8.55.50.1 |
xcmPrtInputAliasEntryOne or more entries may exist corresponding to each entry
in the prtInputTable. XcmPrtInputAliasEntry .1.3.6.1.4.1.253.8.55.50.1.1 |
xcmPrtInputAliasIndexA unique value used to identify this row in the
xcmPrtInputAliasTable. Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.50.1.1.1 |
xcmPrtInputAliasRowStatusManages the status of this conceptual row in the
xcmPrtInputAliasTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.50.1.1.2 |
xcmPrtInputAliasNameDefines an alternate name for the input source. This is in
addition to the prtInputName from the Input Group. Typical
usage is to map an interpreter specific name to the sub-unit
name in the Input Group, e.g., PCL's 'upper' to the device
input name 'main'.rw XcmFixedLocaleDisplayString .1.3.6.1.4.1.253.8.55.50.1.1.3 |
xcmPrtInputAliasSwitchProgramThe input tray switching program for this 'InputAliasName'
presented in a '.' separated list of prtInputIndex values.
For example, the string '1.4.3' indicates start with the
input tray represented by prtInputIndex 1, if it becomes
empty switch to prtInputIndex 4, when it becomes empty
switch to prtInputIndex 3, if it becomes empty then wait
for operator intervention.
An empty string shall indicate unspecified.rw DisplayString .1.3.6.1.4.1.253.8.55.50.1.1.4 |
xcmPrtAuxSheet OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.52 |
xcmPrtAuxPackage OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.60 |
xcmPrtAuxPackageTableThis table lists Auxiliary Sheets enabled for this printer. SEQUENCE OF XcmPrtAuxPackageEntry .1.3.6.1.4.1.253.8.55.60.1 |
xcmPrtAuxPackageEntryAn entry exists corresponding to each entry in the
xcmPrtAuxPackageTable. XcmPrtAuxPackageEntry .1.3.6.1.4.1.253.8.55.60.1.1 |
xcmPrtAuxPackageIndexA unique value used by the printer to identify this
Auxiliary Sheet. Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.60.1.1.1 |
xcmPrtAuxPackageRowStatusManages the status of this conceptual row in the
xcmPrtAuxPackageTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.60.1.1.2 |
xcmPrtAuxPackageTypeSpecifies the Auxiliary Sheet type associated with this row.rw XcmPrtAuxSheetType (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.60.1.1.3 |
xcmPrtAuxPackageContentSpecifies the information content of this auxiliary sheet.
The value zero shall mean notSpecified.rw XcmPrtAuxSheetContent (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.60.1.1.4 |
xcmPrtAuxPackagePrtInputIndexSpecifies the input tray the printer shall use in
printing this auxiliary sheet.
The value zero shall mean notSpecified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.60.1.1.5 |
xcmPrtAuxPackageNextProvides the index of the next Auxiliary Sheet
declared for this printer. This provides a linking
mechanism to group auxiliary pages. The last
auxiliary page to be declared will set this
xcmPrtAuxPackageNext object to zero, meaning no further
sheets.
The value zero shall mean notPresent.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.60.1.1.6 |
xcmPrtInterpPCL OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.70 |
xcmPrtInterpPCLTableThis table is an extension to the prtInterpPCLTable. SEQUENCE OF XcmPrtInterpPCLEntry .1.3.6.1.4.1.253.8.55.70.1 |
xcmPrtInterpPCLEntryAn entry exists corresponding to each entry in the
xcmPrtInterpPCLTable. XcmPrtInterpPCLEntry .1.3.6.1.4.1.253.8.55.70.1.1 |
xcmPrtInterpPCLRowStatusManages the status of this conceptual row in the
xcmPrtInterpPCLTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.70.1.1.1 |
xcmPrtInterpPCLFontSourceDfltThis object provides the PCL-specific PJL variable 'FONTSOURCE'.
'FONTSOURCE' specifies the device location of the default font
in PCL.rw XcmPrtPCLFontSource (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.70.1.1.2 |
xcmPrtInterpPCLFontNumberDfltThis object provides the PCL-specific PJL variable 'FONTNUMBER'.
In PCL, 'FONTNUMBER' specifies the ID of the default font within
the default FONTSOURCE.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.70.1.1.3 |
xcmPrtInterpPCLPitchNumeratorThis object along with xcmPrtInterpPCLPitchDenominator sets
the default for the PCL-specific PJL variable 'PITCH.
These two object sets the default pitch size for the PCL default
font defined in xcmPrtInterpreterPCLFontNumberDflt.
This variable only applies when the default font specified is
a scalable fixed pitch font.
A value of zero shall mean not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.70.1.1.4 |
xcmPrtInterpPCLPitchDenominatorThis object along with xcmPrtInterpPCLPitchNumerator sets
the default for the PCL-specific PJL variable 'PITCH'.
These two object sets the default pitch size for the PCL default
font defined in xcmPrtInterpreterPCLFontNumberDflt.
The PITCH variable only applies when the default font specified
is a scalable fixed pitch font.
A value of zero shall mean not specified.
It is expected that a typical application will set
xcmPrtInterpPCLPitchDenominator to 100.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.70.1.1.5 |
xcmPrtInterpPCLPtSizeNumeratorThis object along with xcmPrtInterpPCLPtSizeDenominatr sets the
default for the PCL-specific PJL variable 'PTSIZE'.
The PTSIZE variable only applies when the FONTNUMBER setting
specifies a scalable proportionally-spaced font.
The size is in units of printer's points, which units are here
considered to be exactly 1/72 of an inch.
The value zero shall mean not specified.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.70.1.1.6 |
xcmPrtInterpPCLPtSizeDenominatrThis object along with xcmPrtInterpPCLPtSizeNumerator sets the
default for the PCL-specific PJL variable 'PTSIZE'.
The PTSIZE variable only applies when the FONTNUMBER setting
specifies a scalable proportionally-spaced font.
The value zero shall mean not specified.
It is expected that a typical application will set this object
to the value 4. For example, if the denominator is set to 4,
describe a PtSize of 8.5, xcmPrtInterpPCLPtSizeNominator must
be set to 34.rw Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.70.1.1.7 |
xcmPrtInterpPCLPrintScreenThis object sets a special mode for 80 character screen dumps.rw XcmPrtPrintScreen (XEROX-PRINTER-EXT-TC) .1.3.6.1.4.1.253.8.55.70.1.1.50 |
xcmPrtMediumTypeSupported OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.55.75 |
xcmPrtMedmTypeSupTableA table of specific and general medium 'types' which are
associated with this host system. SEQUENCE OF XcmPrtMedmTypeSupEntry .1.3.6.1.4.1.253.8.55.75.2 |
xcmPrtMedmTypeSupEntryAn entry for a specific or general medium 'types' which
is associated with this host system. XcmPrtMedmTypeSupEntry .1.3.6.1.4.1.253.8.55.75.2.1 |
xcmPrtMedmTypeSupIndexA unique value used to identify this medium type supported. Ordinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.75.2.1.1 |
xcmPrtMedmTypeSupRowStatusManages the status of this conceptual row in the
'xcmPrtMedmTypeSupTable'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.55.75.2.1.2 |
xcmPrtMedmTypeSupRowPersistenceIndicates persistence of this row, from the given enumeration.rw XcmGenRowPersistence (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.55.75.2.1.3 |
xcmPrtMedmTypeSupNameNamed 'type' of this medium instance.rw XcmFixedLocaleDisplayString .1.3.6.1.4.1.253.8.55.75.2.1.4 |