Home/Catalog/XEROX-GENERAL-TC

XEROX-GENERAL-TC

AI MIB Summary

XEROX-GENERAL-TC defines textual conventions for Xerox multifunction printers and networked imaging devices, providing standardized data types for managing device status, configuration parameters, and operational counters. These conventions enable consistent interpretation of metrics such as interface states, error codes, and resource utilization across Xerox SNMP agents.

Version: 2.42.pub Xerox General Textual Conventions Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
Main OID:
xcmGeneralTC.1.3.6.1.4.1.253.8.50
30
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
XEROX-COMMON-MIB

Objects

30 total
Object Name
xcmGenZeroDotZeroA value used for null object identifiers. Not defined in original IETF SMIv2 (RFC 1442), but defined in RFC 1902 as 'zeroDotZero' - defined here for convenience.
OBJECT IDENTIFIER
.0.0.0
xcmGeneralTCVersion: 2.42.pub Xerox General Textual Conventions Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
MODULE-IDENTITY
.1.3.6.1.4.1.253.8.50
xCmGeneralDummy
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.50.999
xCmGenCardinal16Dummy - DO NOT USE
Cardinal16
.1.3.6.1.4.1.253.8.50.999.1
xCmGenCardinal32Dummy - DO NOT USE
Cardinal32
.1.3.6.1.4.1.253.8.50.999.2
xCmGenCardinal64HighDummy - DO NOT USE
Cardinal64High
.1.3.6.1.4.1.253.8.50.999.3
xCmGenCardinal64LowDummy - DO NOT USE
Cardinal64Low
.1.3.6.1.4.1.253.8.50.999.4
xCmGenCodedCountryDummy - DO NOT USE
CodedCountry
.1.3.6.1.4.1.253.8.50.999.5
xCmGenCodedLanguageDummy - DO NOT USE
CodedLanguage
.1.3.6.1.4.1.253.8.50.999.6
xCmGenCodeIndexedStringIndexDummy - DO NOT USE
CodeIndexedStringIndex
.1.3.6.1.4.1.253.8.50.999.7
xCmGenCounter64HighDummy - DO NOT USE
Counter64High
.1.3.6.1.4.1.253.8.50.999.8
xCmGenCounter64LowDummy - DO NOT USE
Counter64Low
.1.3.6.1.4.1.253.8.50.999.9
xCmGenGauge64HighDummy - DO NOT USE
Gauge64High
.1.3.6.1.4.1.253.8.50.999.10
xCmGenGauge64LowDummy - DO NOT USE
Gauge64Low
.1.3.6.1.4.1.253.8.50.999.11
xCmGenInteger64HighDummy - DO NOT USE
Integer64High
.1.3.6.1.4.1.253.8.50.999.12
xCmGenInteger64LowDummy - DO NOT USE
Integer64Low
.1.3.6.1.4.1.253.8.50.999.13
xCmGenOrdinal16Dummy - DO NOT USE
Ordinal16
.1.3.6.1.4.1.253.8.50.999.14
xCmGenOrdinal32Dummy - DO NOT USE
Ordinal32
.1.3.6.1.4.1.253.8.50.999.15
xCmGenOrdinal64HighDummy - DO NOT USE
Ordinal64High
.1.3.6.1.4.1.253.8.50.999.16
xCmGenOrdinal64LowDummy - DO NOT USE
Ordinal64Low
.1.3.6.1.4.1.253.8.50.999.17
xCmGenFixedLocaleDisplayStringDummy - DO NOT USE
XcmFixedLocaleDisplayString
.1.3.6.1.4.1.253.8.50.999.18
xCmGenGroupSupportDummy - DO NOT USE
XcmGenGroupSupport
.1.3.6.1.4.1.253.8.50.999.19
xCmGenLogFullPolicyDummy - DO NOT USE
XcmGenLogFullPolicy
.1.3.6.1.4.1.253.8.50.999.20
xCmGenOptionValueSyntaxDummy - DO NOT USE
XcmGenOptionValueSyntax
.1.3.6.1.4.1.253.8.50.999.21
xCmGenReconfOptionStateDummy - DO NOT USE
XcmGenReconfOptionState
.1.3.6.1.4.1.253.8.50.999.22
xCmGenRowPersistenceDummy - DO NOT USE
XcmGenRowPersistence
.1.3.6.1.4.1.253.8.50.999.23
xCmGenSNMPDomainDummy - DO NOT USE
XcmGenSNMPDomain
.1.3.6.1.4.1.253.8.50.999.24
xCmGenSNMPVersionDummy - DO NOT USE
XcmGenSNMPVersion
.1.3.6.1.4.1.253.8.50.999.25
xCmGenSNMPv2ErrorStatusDummy - DO NOT USE
XcmGenSNMPv2ErrorStatus
.1.3.6.1.4.1.253.8.50.999.26
xCmGenGlobalUniqueIDDummy - DO NOT USE
XcmGlobalUniqueID
.1.3.6.1.4.1.253.8.50.999.27

More MIBs from Default

Browse all DefaultMIBs →
RC-TLS-MIB

SNMP MIB module

2614 objects→
AVAYA-WLAN-MIB

The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.

2022 objects→
VMWARE-NSX-MIB

The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.

1035 objects→
923switch.m

Standard SNMP MIB module defining data structures for 923switch.m.

999 objects→
CTATX-MIB

Standard SNMP MIB module defining data structures for CTATX-MIB.

747 objects→
DC-BGP-MIB

SNMP MIB module

652 objects→