Home/Catalog/XEROX-COMMS-ENGINE-MIB

XEROX-COMMS-ENGINE-MIB

AI MIB Summary

The XEROX-COMMS-ENGINE-MIB enables granular monitoring and management of communications protocol stacks, intermediate systems, and gateways on Xerox network-accessible host systems, specifically correlating stack layers to host processor indices, network interfaces, and physical I/O devices. It facilitates detailed protocol stack graphing by mapping communication endpoints to standard Host Resources MIB CPU entries and MIB-II interface tables.

Version: 2.32.pub The MIB module for detailed protocol stack graphing, and active management of communications protocol stacks, communications end system applications, communications intermediate systems, and communications gateways for network accessible host systems. Usage: Note that throughout this MIB module, the INDEX clauses referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices Group) of the Host Resources MIB (RFC 1514) shall ALWAYS specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT specify ANY other 'hrDeviceType'. Usage: The object 'xcmCommsStackXrefHrCommDevIndex' in the Comms Stack Xref Group of this MIB MAY be used to specify (for 'bottom' protocol stack layers) the corresponding value of 'hrDeviceIndex' for network, modem, serial port, and parallel port devices. And the object 'xcmCommsStackXrefIfIndex' may be used to specify the value of 'ifIndex' for the corresponding entry in the MIB-II 'ifTable' (ie, 'network interfaces'). Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
Main OID:
xcmCommsEngineMIB.1.3.6.1.4.1.253.8.61
149
Objects
Active
Status
8
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
HOST-RESOURCES-MIB
XEROX-COMMON-MIB
XEROX-GENERAL-TC
XEROX-HOST-RESOURCES-EXT-TC
XEROX-COMMS-ENGINE-TC

Objects

149 total
Object Name
xcmCommsEngineMIBVersion: 2.32.pub The MIB module for detailed protocol stack graphing, and active management of communications protocol stacks, communications end system applications, communications intermediate systems, and communications gateways for network accessible host systems. Usage: Note that throughout this MIB module, the INDEX clauses referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices Group) of the Host Resources MIB (RFC 1514) shall ALWAYS specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT specify ANY other 'hrDeviceType'. Usage: The object 'xcmCommsStackXrefHrCommDevIndex' in the Comms Stack Xref Group of this MIB MAY be used to specify (for 'bottom' protocol stack layers) the corresponding value of 'hrDeviceIndex' for network, modem, serial port, and parallel port devices. And the object 'xcmCommsStackXrefIfIndex' may be used to specify the value of 'ifIndex' for the corresponding entry in the MIB-II 'ifTable' (ie, 'network interfaces'). Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
MODULE-IDENTITY
.1.3.6.1.4.1.253.8.61
xcmCommsEngineMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.2
xcmCommsEngineMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.2.2
xcmCommsEngineGroupComms Engine Group (Comms Engines).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.3
xcmCommsEngineExtGroupComms Engine Ext Group (Comms Engines).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.4
xcmCommsStackGroupComms Stack Group (Stack Layers).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.5
xcmCommsStackExtGroupComms Stack Ext Group (Stack Layers).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.6
xcmCommsStackXrefGroupComms Stack Xref Group (Stack Layers).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.7
xcmCommsMuxGroupComms Mux Group (Multiplexors).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.8
xcmCommsMuxExtGroupComms Mux Ext Group (Multiplexors).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.9
xcmCommsAddressGroupComms Address Group (Directories).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.10
xcmCommsAddressExtGroupComms Address Ext Group (Directories).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.11
xcmCommsTrafficGroupComms Traffic Group (Stack Layer Traffic Counters).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.12
xcmCommsAccessGroupComms Access Group (Stack Layer Access Counters).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.13
xcmCommsMgmtGroupComms Mgmt Group (State Management).
Unknown
.1.3.6.1.4.1.253.8.61.2.2.14
xcmCommsEngineMIBComplianceThe compliance statements for SNMP management agents that implement the Comms Engine MIB.
Unknown
.1.3.6.1.4.1.253.8.61.2.3
xcmCommsEngineMIBHelpComplianceThe compliance statements for SNMP management agents that implement a subset of the Comms Engine MIB, for the sole purpose of supporting extended 'contact' information per device, via the Device Help group of the XCMI Host Resources Ext MIB. Usage: See 'Usage' paragraphs in the DESCRIPTION sub-clauses of the following OBJECT clauses for additional usage details.
Unknown
.1.3.6.1.4.1.253.8.61.2.4
xcmCommsEngine
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.3
xcmCommsEngineTableA table of the communications engines installed and (possibly) running on platforms (ie, CPUs) on this host system.
SEQUENCE OF XcmCommsEngineEntry
.1.3.6.1.4.1.253.8.61.3.2
xcmCommsEngineEntryAn entry for a communications engine installed and (possibly) running on a platform (ie, CPU) on this host system. Usage: Note that values of 'hrDeviceIndex' used to reference entries in the 'xcmCommsEngineTable' shall ALWAYS reference entries in the 'hrDeviceTable' with 'hrDeviceType' equal to 'hrDeviceProcessor' (representing host system CPUs and therefore also having corresponding entries in the 'hrProcessorTable').
XcmCommsEngineEntry
.1.3.6.1.4.1.253.8.61.3.2.1
xcmCommsEngineRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsEngineTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.1
xcmCommsEngineNameHuman-readable name, used by system administrators and end users to identify this communications engine for systems management. Usage: This name should be the one normally used in a command shell for control of this communications engine.ro
XcmFixedLocaleDisplayString
.1.3.6.1.4.1.253.8.61.3.2.1.2
xcmCommsEngineStackLastThe last entry index (regardless of its current state) in the 'xcmCommsStackTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsStackIndex'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.3
xcmCommsEngineMuxLastThe last entry index (regardless of its current state) in the 'xcmCommsMuxTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsMuxIndex'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.4
xcmCommsEngineAddressLastThe last entry index (regardless of its current state) in the 'xcmCommsAddressTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsAddressIndex'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.6
xcmCommsEngineMgmtLastThe last entry index (regardless of its current state) in the 'xcmCommsMgmtTable' of this communications engine, on this host system. Usage: The last entry index explicitly bounds the valid range of 'xcmCommsMgmtIndex'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.7
xcmCommsEngineGroupSupportThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.ro
XcmCommsEngineGroupSupport (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.8
xcmCommsEngineCreateSupportThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.ro
XcmCommsEngineGroupSupport (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.9
xcmCommsEngineUpdateSupportThe terse conformance statement of ALL mandatory, conditionally mandatory, and optional XCMI Comms Engine MIB object groups supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Usage: Conforming management agents shall ALWAYS accurately report their support for XCMI Comms Engine MIB object groups.ro
XcmCommsEngineGroupSupport (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.3.2.1.10
xcmCommsEngineExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.4
xcmCommsEngineExtTableA 'sparse' table which augments 'xcmCommsEngineTable' with additional useful information.
SEQUENCE OF XcmCommsEngineExtEntry
.1.3.6.1.4.1.253.8.61.4.2
xcmCommsEngineExtEntryA 'sparse' entry which augments 'xcmCommsEngineEntry' with additional useful information.
XcmCommsEngineExtEntry
.1.3.6.1.4.1.253.8.61.4.2.1
xcmCommsEngineExtRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsEngineExtTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.4.2.1.1
xcmCommsEngineExtStateA relatively generic description of the current state of this communications entity.ro
XcmCommsMgmtState (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.4.2.1.2
xcmCommsEngineExtConditionsA relatively generic description of the current conditions of this communications entity.ro
XcmCommsMgmtConditions (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.4.2.1.4
xcmCommsEngineExtVersionIDThe software product ID of the SNMP sub-agent which implements the XCMI Comms Engine MIB on this host system. Usage: This object shall specify the software product ID of an SNMP sub-agent (possibly also found in a conceptual row in the 'hrSWRunTable' and/or 'hrSWInstalledTable' in the IETF HR MIB). This object shall NOT specify a particular release of the XCMI Comms Engine MIB, or the whole host system product. Note: Contrast with 'sysObjectID' for the whole SNMP agent in the IETF MIB-II (RFC 1213) and 'hrDeviceID' for the whole device (or whole product, in the case of 'xcmHrDevice...') in the IETF Host Resources MIB (RFC 1514).ro
ProductID (HOST-RESOURCES-MIB)
.1.3.6.1.4.1.253.8.61.4.2.1.5
xcmCommsEngineExtVersionDateThe software build date of the SNMP sub-agent which implements the XCMI Comms Engine MIB on this host system. Usage: This object shall specify the BUILD date of the SNMP sub-agent software (not available elsewhere in IETF/XCMI MIBs). This object shall NOT specify the INSTALL date of the SNMP sub-agent software on this host system, nor the RESET date. Note: Contrast with 'hrSWInstalledDate' in the Software Installed group of the IETF Host Resources MIB (RFC 1514), and 'xcmHrDevInfoResetDate' in the Device Info group of the XCMI Host Resources Extensions MIB.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.4.2.1.6
xcmCommsEngineExtMgmtIndexThe value of 'xcmCommsMgmtIndex' corresponding to a directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.4.2.1.7
xcmCommsEngineExtOwnerOIDThe OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsEngineExtTable'.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.4.2.1.8
xcmCommsStack
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.5
xcmCommsStackTableA table containing information on the relationships between the multiple stack layers or sublayers (ie, protocol entities) comprising the (possibly) running 'protocol stacks' on this host system. In particular, it contains information about which stack layer runs 'above' and 'below' which other stack layer.
SEQUENCE OF XcmCommsStackEntry
.1.3.6.1.4.1.253.8.61.5.2
xcmCommsStackEntryAn entry for a stack layer in a protocol stack installed and (possibly) running on this host system.
XcmCommsStackEntry
.1.3.6.1.4.1.253.8.61.5.2.1
xcmCommsStackIndexA unique value used by this host system to identify this conceptual row in the 'xcmCommsStackTable'.
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.1
xcmCommsStackRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsStackTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.2
xcmCommsStackTypeOIDAn unambiguous stack layer type, used by system administrators and end users to identify the type of this stack layer. Usage: Since this unambiguous stack layer type is specified as an object identifier, it may be taken from any IETF, Xerox, third- party, or product-specific MIB, or it may simply be any IETF SMIv2-style 'autonomous type'. Usage: Suitable values for this unambiguous stack layer type are specified in the companion XCMI Comms Config TC (eg, 'xcmCONetwareIPX').ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.5.2.1.3
xcmCommsStackNameHuman-readable name, used by system administrators and end users to identify this stack layer for systems management. Usage: This name should be the one normally used in a command shell for control of this stack layer.ro
XcmFixedLocaleDisplayString
.1.3.6.1.4.1.253.8.61.5.2.1.4
xcmCommsStackPositionA relatively generic description of the current position of this protocol entity (ie, this layer) in this protocol stack. Usage: A conceptual row in 'xcmCommsStackTable', which occupies a 'bottom' position in a protocol stack AND has a corresponding row in the 'xcmCommsStackXrefTable', should ALWAYS have valid references in 'xcmCommsStackXrefIfIndex' (to IETF MIB-II) and 'xcmCommsStackXrefHrCommDevIndex' (to IETF Host Resources MIB). Usage: A conceptual row in 'xcmCommsStackTable' which occupies a 'lowerMux' and/or an 'upperMux' position in a protocol stack shall ALWAYS have one (or two) valid corresponding conceptual rows in the 'xcmCommsMuxTable', as the conventionally used 'xcmCommsStack[Lower|Upper]StackIndex' objects take on zero values for multiplexors (thus breaking the graph of the stack layers, without the use of the 'xcmCommsMuxTable').ro
XcmCommsStackPosition (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.5
xcmCommsStackLowerStackIndexThe value of 'xcmCommsStackIndex' corresponding to a next lower associated conceptual row in the 'xcmCommsStackTable', or zero if this stack layer's position is either 'bottom' or 'lowerMux'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.6
xcmCommsStackUpperStackIndexThe value of 'xcmCommsStackIndex' corresponding to a next higher associated conceptual row in the 'xcmCommsStackTable', or zero if this stack layer's position is either 'upperMux' or sometimes 'top' (see usage note below). Usage: Only for protocol entities whose current purpose is either 'layerInterWorkingUnit' (ie, relays or gateways) or 'systemInterWorkingUnit' (ie, application gateways), it is permitted that the stack layer whose current position is 'top' have an upper layer index pointing to the peer entity (also in a 'top' position) which comprises the 'other half' of a relay or gateway between two different address domains (ie, an active protocol conversion relay) - that is the graphed protocol stack is an inverted 'U'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.7
xcmCommsStackAddressIndexThe value of 'xcmCommsAddressIndex' corresponding to the first associated conceptual row in the 'xcmCommsAddressTable', or zero if this 'owner entity' does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.8
xcmCommsStackOptionIndexThe value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this stack layer does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.9
xcmCommsStackLowerMuxIndexThe value of 'xcmCommsMuxIndex' corresponding to the first associated conceptual row in the 'xcmCommsMuxTable', or zero if this stack layer's position is NOT 'lowerMux'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.10
xcmCommsStackUpperMuxIndexThe value of 'xcmCommsMuxIndex' corresponding to the first associated conceptual row in the 'xcmCommsMuxTable', or zero if this stack layer's position is NOT 'upperMux'.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.5.2.1.11
xcmCommsStackExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.6
xcmCommsStackExtTableA 'sparse' table which augments 'xcmCommsStackTable' with additional useful information.
SEQUENCE OF XcmCommsStackExtEntry
.1.3.6.1.4.1.253.8.61.6.2
xcmCommsStackExtEntryA 'sparse' entry which augments 'xcmCommsStackEntry' with additional useful information.
XcmCommsStackExtEntry
.1.3.6.1.4.1.253.8.61.6.2.1
xcmCommsStackExtRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsStackExtTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.1
xcmCommsStackExtStateA relatively generic description of the current state of this communications entity.ro
XcmCommsMgmtState (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.2
xcmCommsStackExtConditionsA relatively generic description of the current conditions of this communications entity.ro
XcmCommsMgmtConditions (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.3
xcmCommsStackExtPurposeA relatively generic description of the current purpose of this stack layer during normal operation.ro
XcmCommsStackExtPurpose (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.4
xcmCommsStackExtRoleA relatively generic description of the current role of this stack layer during normal operation.ro
XcmCommsStackExtRole (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.5
xcmCommsStackExtSuiteThe current protocol suite of this protocol entity (stack layer or sublayer).ro
XcmCommsStackExtSuite (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.6
xcmCommsStackExtSuiteVersionThe current protocol suite version of this protocol entity (stack layer or sublayer).ro
XcmCommsStackExtSuiteVersion (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.7
xcmCommsStackExtLayerThe closest approximate layer in the OSI Reference Model (CCITT X.200 | ISO 7498) to the current behavior of this stack layer or sublayer.ro
XcmCommsStackExtLayer (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.8
xcmCommsStackExtProtocolThe specific protocol (within a given protocol suite) currently configured for this stack layer or sublayer.ro
XcmCommsStackExtProtocol (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.9
xcmCommsStackExtMgmtIndexThe value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.6.2.1.10
xcmCommsStackExtOwnerOIDThe OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsStackExtTable'. Usage: A Printer Channel, for example, might choose to specify the OID of some conceptual row in the 'prtChannelTable'.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.6.2.1.11
xcmCommsStackXref
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.7
xcmCommsStackXrefTableA table containing optional cross reference information for the multiple stack layers or sublayers (ie, protocol entities) comprising the (possibly) running 'protocol stacks' on this host system.
SEQUENCE OF XcmCommsStackXrefEntry
.1.3.6.1.4.1.253.8.61.7.2
xcmCommsStackXrefEntryAn entry for a stack layer in a protocol stack installed and (possibly) running on this host system.
XcmCommsStackXrefEntry
.1.3.6.1.4.1.253.8.61.7.2.1
xcmCommsStackXrefRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsStackXrefTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.1
xcmCommsStackXrefLayerMgmtIndexThe value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerManagement', or zero if this this stack layer has no associated layer management entity.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.2
xcmCommsStackXrefLayerSecIndexThe value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerSecurity', or zero if this this stack layer has no associated layer security entity.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.3
xcmCommsStackXrefLayerIWUIndexThe value of 'xcmCommsStackIndex' corresponding to the one-to-one associated conceptual row in the 'xcmCommsStackTable' which has 'xcmCommsStackExtPurpose' of 'layerInterWorkingUnit', or zero if this this stack layer has no associated layer relay entity.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.4
xcmCommsStackXrefHrSWRunIndexThe value of 'hrSWRunIndex' corresponding to the directly associated conceptual row in the 'hrSWRunTable' of the Host Resources MIB (RFC 1514), or zero if 'hrSWRunTable' is NOT implemented.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.5
xcmCommsStackXrefHrSWInsIndexThe value of 'hrSWInstalledIndex' corresponding to the directly associated conceptual row in the 'hrSWInstalledTable' of the Host Resources MIB (RFC 1514), or zero if 'hrSWInstalledTable' is NOT implemented.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.6
xcmCommsStackXrefIfIndexThe value of 'ifIndex' corresponding to the directly associated conceptual row in the 'ifTable' (Interfaces Group) of the MIB-II (RFC 1213), or zero if the position of this stack layer is NOT 'bottom' (ie, this stack layer does NOT represent a physical 'network interface'). Usage: This is partially a convenience object, since given the value of 'hrDeviceIndex' for an 'hrDeviceNetwork' type device, the corresponding 'ifIndex' is found in the mandatory entry in the 'hrNetworkTable'. However, note that for 'hrDeviceModem', 'hrDeviceSerialPort', and 'hrDeviceParallelPort' devices, the 'xcmCommsStackXrefIfIndex' object is a NECESSITY for support of this communications engine MIB.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.7
xcmCommsStackXrefHrCommDevIndexThe value of 'hrDeviceIndex' corresponding to the directly associated conceptual rows in the 'hrDeviceTable' and (possibly) 'hrNetworkTable' of the Host Resources MIB (RFC 1514), or zero if the position of this stack layer is NOT 'bottom' (ie, this stack layer does NOT represent a physical 'network interface'). Usage: Note that for 'hrDeviceModem', 'hrDeviceSerialPort', and 'hrDeviceParallelPort' devices, there is NO corresponding entry in the 'hrNetworkTable', a subtle difference between MIB-II (RFC 1213) and the Host Resources MIB (RFC 1514).ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.7.2.1.8
xcmCommsMux
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.8
xcmCommsMuxTableA table containing information on the relationships between the multiple stack layers or sublayers (ie, protocol entities) participating in a 'upper' or 'lower' multiplexor (ie, the simultaneous adjacency of two or more 'upper' or 'lower' stack layers with a single instance of a 'base' stack layer), eg, IP (a 'base' stack layer) operating below both TCP and UDP (the 'adjacent' stack layers).
SEQUENCE OF XcmCommsMuxEntry
.1.3.6.1.4.1.253.8.61.8.2
xcmCommsMuxEntryAn entry for a 'base' stack layer participating in an 'upper' or 'lower' multiplexor.
XcmCommsMuxEntry
.1.3.6.1.4.1.253.8.61.8.2.1
xcmCommsMuxIndexA unique value used by this host system to identify this conceptual row in the 'xcmCommsMuxTable'.
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.1
xcmCommsMuxRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsMuxTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.2
xcmCommsMuxNextIndexThe value of 'xcmCommsMuxIndex' corresponding to a next associated conceptual row in the 'xcmCommsMuxTable', or zero if this is the last associated conceptual row in a given set.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.3
xcmCommsMuxPreviousIndexThe value of 'xcmCommsMuxIndex' corresponding to a previous associated conceptual row in the 'xcmCommsMuxTable', or zero if this is the first associated conceptual row in a given set.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.4
xcmCommsMuxOptionIndexThe value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this multiplexor entry does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.5
xcmCommsMuxBaseStackIndexThe value of 'xcmCommsStackIndex' corresponding to the base associated conceptual row in the 'xcmCommsStackTable'.ro
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.6
xcmCommsMuxAdjacentStackIndexThe value of 'xcmCommsStackIndex' corresponding to the adjacent associated conceptual row in the 'xcmCommsStackTable'.ro
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.8.2.1.7
xcmCommsMuxExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.9
xcmCommsMuxExtTableA 'sparse' table which augments 'xcmCommsMuxTable' with additional useful information.
SEQUENCE OF XcmCommsMuxExtEntry
.1.3.6.1.4.1.253.8.61.9.2
xcmCommsMuxExtEntryA 'sparse' entry which augments 'xcmCommsMuxEntry' with additional useful information.
XcmCommsMuxExtEntry
.1.3.6.1.4.1.253.8.61.9.2.1
xcmCommsMuxExtRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsMuxExtTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.9.2.1.1
xcmCommsMuxExtStateA relatively generic description of the current state of this communications entity.ro
XcmCommsMgmtState (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.9.2.1.2
xcmCommsMuxExtConditionsA relatively generic description of the current conditions of this communications entity.ro
XcmCommsMgmtConditions (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.9.2.1.3
xcmCommsMuxExtMgmtIndexThe value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.9.2.1.4
xcmCommsMuxExtAddressIndexThe value of 'xcmCommsAddressIndex' corresponding to the first associated conceptual row in the 'xcmCommsAddressTable', or zero if this 'owner entity' does NOT require such information.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.9.2.1.5
xcmCommsMuxExtOwnerOIDThe OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsMuxExtTable'.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.9.2.1.6
xcmCommsAddress
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.10
xcmCommsAddressTableA table containing information on unicast, multicast, and broadcast addresses (remote/local) known to this host system.
SEQUENCE OF XcmCommsAddressEntry
.1.3.6.1.4.1.253.8.61.10.2
xcmCommsAddressEntryAn entry containing information on one unicast, multicast, or broadcast address (remote/local) known to this host system.
XcmCommsAddressEntry
.1.3.6.1.4.1.253.8.61.10.2.1
xcmCommsAddressIndexA unique value used by this host system to identify this conceptual row in the 'xcmCommsAddressTable'.
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.10.2.1.1
xcmCommsAddressRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsAddressTable'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.10.2.1.2
xcmCommsAddressTypeOIDAn unambiguous address type, used by system administrators and end users to identify the type of this address. Usage: Since this unambiguous address type is specified as an object identifier, it may be taken from any IETF, Xerox, third- party, or product-specific MIB, or it may simply be any IETF SMIv2-style 'autonomous type'. Usage: Suitable values for this unambiguous address type are specified in the companion XCMI Comms Config TC (eg, 'xcmCONetwareIPX').rw
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.10.2.1.3
xcmCommsAddressUserRoleAn unambiguous address user role, used by system administrators and end users to identify the user role of this address. Usage: This unambiguous address user role is specified by a value defined in the textual convention 'XcmSecUserRole' in the XCMI Security/AAA TC. Usage: This unambiguous address user role is weakly typed here to avoid cyclic compilation dependencies between XCMI MIBs. Usage: A chain of 'xcmCommsAddressEntry' objects may be pointed to by 'xcmDevHelpCommsAddressIndex' in the Device Help group of the XCMI Host Resources Extensions MIB. In this case, the 'xcmCommsAddressTypeOID' object may contain values such as 'xcmCOOsiwanPSTNAddress' (analog phone number), 'xcmCOOsiwanFaxAddress' (fax phone number), etc, taken from the XCMI Comms Config TC. In this case, the 'xcmCommsAddressUserRole' object may be used to specify the role of the system admin, system operator, etc (whose name is specified by 'xcmCommsAddressName', address format is specified by 'xcmCommsAddressTypeOID', and actual address is specified by 'xcmCommsAddressCanonical').rw
Integer32
.1.3.6.1.4.1.253.8.61.10.2.1.4
xcmCommsAddressNameHuman-readable name, used by system administrators and end users to identify this protocol entity. Usage: This name should be the one normally used in a command shell for control of this protocol entity. Usage: When a chain of 'xcmCommsAddressEntry' objects is pointed to by 'xcmHrDevHelpCommsAddressIndex' in the Device Help group of the XCMI Host Resources Extensions MIB (see details at 'xcmCommsAddressUserRole' object above) special semantics apply. In this case, the 'xcmCommsAddressName' object may be used to specify the name of the system admin, system operator, etc (whose role is specified by 'xcmCommsAddressUserRole', address format is specified by 'xcmCommsAddressTypeOID', and actual address is specified by 'xcmCommsAddressCanonical').rw
XcmFixedLocaleDisplayString
.1.3.6.1.4.1.253.8.61.10.2.1.5
xcmCommsAddressCanonicalThe current canonical address of this protocol entity.rw
OCTET STRING
.1.3.6.1.4.1.253.8.61.10.2.1.6
xcmCommsAddressNextIndexThe value of 'xcmCommsAddressIndex' corresponding to a next associated conceptual row in the 'xcmCommsAddressTable', or zero if this is the last associated conceptual row in a given set. Usage: A locally administered 'directory' may be searched and/or managed via use of the 'xcmCommsAddressNextIndex' and the 'xcmCommsAddressPreviousIndex' objects referenced from each base protocol entity (ie, stack layer).rw
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.10.2.1.7
xcmCommsAddressPreviousIndexThe value of 'xcmCommsAddressIndex' corresponding to a previous associated conceptual row in the 'xcmCommsAddressTable', or zero if this is the first associated conceptual row in a given set.rw
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.10.2.1.8
xcmCommsAddressOptionIndexThe value of 'xcmCommsOptionIndex' corresponding to the first associated conceptual row in the 'xcmCommsOptionTable', or zero if this address entry does NOT require such information.rw
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.10.2.1.9
xcmCommsAddressExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.11
xcmCommsAddressExtTableA 'sparse' table which augments 'xcmCommsAddressTable' with additional useful information.
SEQUENCE OF XcmCommsAddressExtEntry
.1.3.6.1.4.1.253.8.61.11.2
xcmCommsAddressExtEntryA 'sparse' entry which augments 'xcmCommsAddressEntry' with additional useful information.
XcmCommsAddressExtEntry
.1.3.6.1.4.1.253.8.61.11.2.1
xcmCommsAddressExtRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsAddressExtTable'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.1
xcmCommsAddressExtStateA relatively generic description of the current state of this communications entity.ro
XcmCommsMgmtState (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.2
xcmCommsAddressExtConditionsA relatively generic description of the current conditions of this communications entity.ro
XcmCommsMgmtConditions (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.3
xcmCommsAddressExtFormThe current address form of this protocol entity.rw
XcmCommsAddressExtForm (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.4
xcmCommsAddressExtScopeThe current address scope of this protocol entity.rw
XcmCommsAddressExtScope (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.5
xcmCommsAddressExtFanoutThe current address fan out of this protocol entity.rw
XcmCommsAddressExtFanout (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.6
xcmCommsAddressExtMgmtIndexThe value of 'xcmCommsMgmtIndex' corresponding to the directly associated conceptual row in the 'xcmCommsMgmtTable', or zero if this 'managed entity' does NOT require such information.rw
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.11.2.1.7
xcmCommsAddressExtOwnerOIDThe OID (object identifier) of the conceptual row or simple object which represents some 'owner entity' associated with this entry in the 'xcmCommsAddressExtTable'.rw
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.11.2.1.8
xcmCommsTraffic
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.12
xcmCommsTrafficTableA table containing input and output traffic counters for stack layers.
SEQUENCE OF XcmCommsTrafficEntry
.1.3.6.1.4.1.253.8.61.12.2
xcmCommsTrafficEntryAn entry containing input and output traffic counters for this stack layer.
XcmCommsTrafficEntry
.1.3.6.1.4.1.253.8.61.12.2.1
xcmCommsTrafficRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsTrafficTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.12.2.1.1
xcmCommsTrafficInputUnitA layer input unit, used by system administrators and end users of this layer for traffic counters.ro
XcmHrDevTrafficUnit (XEROX-HOST-RESOURCES-EXT-TC)
.1.3.6.1.4.1.253.8.61.12.2.1.2
xcmCommsTrafficOutputUnitA layer output unit, used by system administrators and end users of this layer for traffic counters.ro
XcmHrDevTrafficUnit (XEROX-HOST-RESOURCES-EXT-TC)
.1.3.6.1.4.1.253.8.61.12.2.1.3
xcmCommsTrafficInputCountA layer input traffic count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.ro
Counter32
.1.3.6.1.4.1.253.8.61.12.2.1.4
xcmCommsTrafficOutputCountA layer output traffic count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.ro
Counter32
.1.3.6.1.4.1.253.8.61.12.2.1.5
xcmCommsTrafficInputErrorsA layer input errors count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.ro
Counter32
.1.3.6.1.4.1.253.8.61.12.2.1.6
xcmCommsTrafficOutputErrorsA layer output errors count, used by system administrators and end users of this layer. Usage: Although no default value ('DEFVAL' clause) is permitted (by IETF SMIv2) for this counter, conforming host systems shall ALWAYS zero this counter upon conceptual row creation.ro
Counter32
.1.3.6.1.4.1.253.8.61.12.2.1.7
xcmCommsAccess
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.13
xcmCommsAccessTableA table containing current, high-water mark, and maximum permitted values for both connection (or association) and message (or datagram) ports at the upper sides (ie, service provider interfaces) of stack layers.
SEQUENCE OF XcmCommsAccessEntry
.1.3.6.1.4.1.253.8.61.13.2
xcmCommsAccessEntryA table containing current, high-water mark, and maximum permitted values for both connection (or association) and message (or datagram) ports at the upper side (ie, service provider interface) of this stack layer.
XcmCommsAccessEntry
.1.3.6.1.4.1.253.8.61.13.2.1
xcmCommsAccessRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsAccessTable'.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.13.2.1.1
xcmCommsAccessConnectPortsThe current number of connection (or association) ports open at the upper side (ie, service provider interface) of this layer.ro
Gauge32
.1.3.6.1.4.1.253.8.61.13.2.1.2
xcmCommsAccessHighConnectPortsThe highest number of connection (or association) ports open at the upper side (ie, service provider interface) of this layer.ro
Gauge32
.1.3.6.1.4.1.253.8.61.13.2.1.3
xcmCommsAccessMaxConnectPortsThe maximum number of connection (or association) ports permitted at the upper side (ie, service provider interface) of this layer.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.13.2.1.4
xcmCommsAccessDatagramPortsThe current number of message (or datagram) ports open at the upper side (ie, service provider interface) of this layer.ro
Gauge32
.1.3.6.1.4.1.253.8.61.13.2.1.5
xcmCommsAccessHighDatagramPortsThe highest number of message (or datagram) ports open at the upper side (ie, service provider interface) of this layer.ro
Gauge32
.1.3.6.1.4.1.253.8.61.13.2.1.6
xcmCommsAccessMaxDatagramPortsThe maximum number of message (or datagram) ports permitted at the upper side (ie, service provider interface) of this layer.ro
Cardinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.13.2.1.7
xcmCommsMgmt
OBJECT IDENTIFIER
.1.3.6.1.4.1.253.8.61.14
xcmCommsMgmtTableA table containing additional management control objects for installed and (possibly) active entities on this host system and supporting detailed and extensible 'states' and 'conditions'.
SEQUENCE OF XcmCommsMgmtEntry
.1.3.6.1.4.1.253.8.61.14.2
xcmCommsMgmtEntryAn entry containing additional management control objects for installed and (possibly) active entity on this host system and supporting detailed and extensible 'states' and 'conditions'.
XcmCommsMgmtEntry
.1.3.6.1.4.1.253.8.61.14.2.1
xcmCommsMgmtIndexA unique value used by this host system to identify this conceptual row in the 'xcmCommsMgmtTable'.
Ordinal32 (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.14.2.1.1
xcmCommsMgmtRowStatusThis object is used to create and delete individual conceptual rows in the 'xcmCommsMgmtTable'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.14.2.1.2
xcmCommsMgmtCommandRequestThe most recent comms management command request specified for this conceptual row in the 'xcmCommsMgmtTable'.rw
XcmCommsMgmtCommandRequest (XEROX-COMMS-ENGINE-TC)
.1.3.6.1.4.1.253.8.61.14.2.1.3
xcmCommsMgmtCommandDataThe most recent comms management command data (if any) specified for this conceptual row in the 'xcmCommsMgmtTable'.rw
XcmCommsMgmtCommandData
.1.3.6.1.4.1.253.8.61.14.2.1.4
xcmCommsMgmtCommandStatusThe simple comms management error status associated with this conceptual row in 'xcmCommsMgmtTable'. Usage: Conforming management agents shall ALWAYS set this object to the value returned in an SNMP Set-Response PDU when a simple comms management operation is 'accepted', ie, when 'xcmCommsMgmtCommandInProgress' goes from 'false' to 'true'. Usage: Conforming management agents shall ALWAYS set this object to the value of the completion status of the (possibly deferred) simple comms management operation, when 'xcmCommsMgmtCommandInProgress' goes from 'true' to 'false'.ro
XcmGenSNMPv2ErrorStatus (XEROX-GENERAL-TC)
.1.3.6.1.4.1.253.8.61.14.2.1.5
xcmCommsMgmtCommandInProgressThe comms management in progress status associated with this conceptual row in 'xcmCommsMgmtTable'.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.253.8.61.14.2.1.6