XEROX-COMMS-CONFIG-MIB
Version: 2.32.pub
The MIB module which supports active configuration discovery of communications protocol stacks, communications end system applications, communications intermediate systems, and communications gateways for network accessible host systems.
Usage: Note that throughout this MIB module, the INDEX clauses
referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices Group) of the Host Resources MIB (RFC 1514) shall ALWAYS specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT specify host system 'network interfaces', with entries in the 'ifTable' (Interfaces Group) of MIB-II (RFC 1213).
Copyright (C) 1997 Xerox Corporation. All Rights Reserved.
Main OID:
xcmCommsConfigMIB.1.3.6.1.4.1.253.8.64
27
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
xcmCommsConfigMIBVersion: 2.32.pub
The MIB module which supports active configuration discovery
of communications protocol stacks, communications end system
applications, communications intermediate systems, and
communications gateways for network accessible host systems.
Usage: Note that throughout this MIB module, the INDEX clauses
referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices
Group) of the Host Resources MIB (RFC 1514) shall ALWAYS
specify host system CPUs (ie, 'hrDeviceProcessor') and shall NOT
specify host system 'network interfaces', with entries in the
'ifTable' (Interfaces Group) of MIB-II (RFC 1213).
Copyright (C) 1997 Xerox Corporation. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.253.8.64 |
xcmCommsConfigMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.2 |
xcmCommsConfigMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.2.2 |
xcmCommsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.3 |
xcmCommsConfigTableA table of the communications engines installed and (possibly)
running on platforms (ie, CPUs) on this host system. SEQUENCE OF XcmCommsConfigEntry .1.3.6.1.4.1.253.8.64.3.2 |
xcmCommsConfigEntryAn entry for a communications engine installed and (possibly)
running on a platform (ie, CPU) on this host system.
Usage: Note that values of 'hrDeviceIndex' used to reference
entries in the 'xcmCommsEngineTable' shall ALWAYS reference
entries in the 'hrDeviceTable' with 'hrDeviceType' equal to
'hrDeviceProcessor' (representing host system CPUs and therefore
also having corresponding entries in the 'hrProcessorTable'). XcmCommsConfigEntry .1.3.6.1.4.1.253.8.64.3.2.1 |
xcmCommsConfigRowStatusThis object is used to create and delete individual conceptual
rows in the 'xcmCommsConfigTable'.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.64.3.2.1.1 |
xcmCommsConfigActiveOptionFirstThe value of 'xcmCommsOptionIndex' corresponding to the first
active configuration option (in 'xcmCommsOptionTable'), or zero
if this communications engine does NOT require such information.
Usage: This 'chain' represents currently active configuration
options of this communications engine.ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.3.2.1.2 |
xcmCommsConfigActiveOptionLastThe value of 'xcmCommsOptionIndex' corresponding to the last
active configuration option (in 'xcmCommsOptionTable'), or zero
if this communications engine does NOT require such information.
Usage: This 'chain' represents currently active configuration
options of this communications engine.
Usage: The last entry index explicitly bounds the valid range
of 'xcmCommsOptionIndex'.ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.3.2.1.3 |
xcmCommsConfigGroupSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI Comms Config MIB object groups
supported by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents shall ALWAYS accurately
report their support for XCMI Comms Config MIB object groups.ro XcmCommsConfigGroupSupport (XEROX-COMMS-CONFIG-TC) .1.3.6.1.4.1.253.8.64.3.2.1.4 |
xcmCommsConfigCreateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI Comms Config MIB object groups
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents shall ALWAYS accurately
report their support for XCMI Comms Config MIB object groups.ro XcmCommsConfigGroupSupport (XEROX-COMMS-CONFIG-TC) .1.3.6.1.4.1.253.8.64.3.2.1.5 |
xcmCommsConfigUpdateSupportThe terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI Comms Config MIB object groups
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents shall ALWAYS accurately
report their support for XCMI Comms Config MIB object groups.ro XcmCommsConfigGroupSupport (XEROX-COMMS-CONFIG-TC) .1.3.6.1.4.1.253.8.64.3.2.1.6 |
xcmCommsOption OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.4 |
xcmCommsOptionTableA table containing information on installation, configuration,
or other aspects of communications options on this host system. SEQUENCE OF XcmCommsOptionEntry .1.3.6.1.4.1.253.8.64.4.2 |
xcmCommsOptionEntryAn entry containing information on installation, configuration,
or other aspects of communications options on this host system. XcmCommsOptionEntry .1.3.6.1.4.1.253.8.64.4.2.1 |
xcmCommsOptionIndexA unique value used by this host system to identify this
conceptual row in the 'xcmCommsOptionTable'. Ordinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.1 |
xcmCommsOptionRowStatusThis object is used to create and delete individual conceptual
rows in the 'xcmCommsOptionTable'.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.253.8.64.4.2.1.2 |
xcmCommsOptionTypeOIDAn unambiguous communications option type,
used by system administrators and end users to identify
this communications option.
Usage: Since this communications option type is specified
as an object identifier, it may be taken from any IETF, Xerox,
third- party, or product-specific MIB, or it may simply be any
IETF SMIv2-style 'autonomous type'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.4.2.1.3 |
xcmCommsOptionValueSyntaxA communications option value syntax,
used by system administrators and end users to specify
the correct value syntax for this communications option.
Usage: This communications option value syntax is used to
select which of the following three objects shall be used to
contain the value of this communications option.ro XcmGenOptionValueSyntax (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.4 |
xcmCommsOptionValueIntegerA communications option value integer,
used by system administrators and end users to specify
the current value for a communications option
with a base value syntax of 'INTEGER'.ro Integer32 .1.3.6.1.4.1.253.8.64.4.2.1.5 |
xcmCommsOptionValueOIDA communications option value OID (object identifier),
used by system administrators and end users to specify
the current value for a communications option
with a base value syntax of 'OBJECT IDENTIFIER'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.253.8.64.4.2.1.6 |
xcmCommsOptionValueStringA communications option value string,
used by system administrators and end users to specify
the current value for a communications option
with a base value syntax of 'OCTET STRING'.ro OCTET STRING .1.3.6.1.4.1.253.8.64.4.2.1.7 |
xcmCommsOptionValueLocalizationA communications option value localization,
used by system administrators and end users to specify
the static localization for a communications option
with a base value syntax of 'OCTET STRING'.
Usage: For a communications option string to which POSIX-style
localization (territory, language, character set) is applicable,
this object shall ALWAYS contain a suitable index value for
'xcmGenLocalizationIndex' from the XCMI General MIB, or zero to
indicate 'none'.ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.8 |
xcmCommsOptionValueCodedCharSetA communications option value character set,
used by system administrators and end users to specify
the current character set for a communications option
with a base value syntax of 'OCTET STRING'.
Usage: For a communications option string to which ONLY
character set conversion (and NOT territory or language aspects
of 'localization') is applicable, this object shall ALWAYS
contain a suitable value or 'other(1)' to indicate 'none' or
not currently standardized and enumerated in 'CodedCharSet'.
The 'CodedCharSet' textual convention is defined in the IETF
Printer MIB (RFC 1759).ro CodedCharSet (Printer-MIB) .1.3.6.1.4.1.253.8.64.4.2.1.9 |
xcmCommsOptionNextIndexThe value of 'xcmCommsOptionIndex' corresponding to the next
'chained' conceptual row in the 'xcmCommsOptionTable', or zero
if this is the last associated conceptual row in a particular
vertical 'chain' within a given set.
Usage: Generally, communications options (of similar or unlike
type) are 'chained' vertically via '...[Next|Previous]Index'.
But, in the case where particular communications options MUST
be 'tightly coupled', they should be 'shelved' horizontally via
'...[Family|Previous]Index' (eg, an IP address and an IP subnet
mask).ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.10 |
xcmCommsOptionPreviousIndexThe value of 'xcmCommsOptionIndex' corresponding to a previous
associated conceptual row in the 'xcmCommsOptionTable', or zero
if this is the first associated conceptual row in a given set.
Usage: This object provides common 'backward' linkage for BOTH
the 'xcmCommsOptionNextIndex' and 'xcmCommsOptionFamilyIndex'
linkage objects. A previous conceptual row MAY 'forward'
reference this conceptual row via either '...NextIndex' or
'...FamilyIndex' - ie, a given conceptual row MAY 'forward'
reference EXACTLY zero, one, or two 'later' conceptual rows.ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.11 |
xcmCommsOptionFamilyIndexThe value of 'xcmCommsOptionIndex' corresponding to the next
'family' conceptual row in the 'xcmCommsOptionTable', or zero
if this is the last associated conceptual row in a particular
horizontal 'shelf' (of 'family' members) within a given set.
Usage: Generally, communications options (of similar or unlike
type) are 'chained' vertically via '...[Next|Previous]Index'.
But, in the case where particular communications options MUST
be 'tightly coupled', they should be 'shelved' horizontally via
'...[Family|Previous]Index' (eg, an IP address and an IP subnet
mask).ro Cardinal32 (XEROX-GENERAL-TC) .1.3.6.1.4.1.253.8.64.4.2.1.12 |