WWP-XCVR-MIB
AI MIB Summary
The WWP-XCVR-MIB module enables SNMP-based monitoring and management of WWP System physical transceiver devices, exposing critical operational metrics such as optical power levels, laser bias currents, temperature, and module status flags for link integrity verification.
The MIB module for the WWP System physical transceiver devices.
Main OID:
wwpXcvrMIB.1.3.6.1.4.1.6141.2.14
31
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
wwpXcvrMIBThe MIB module for the WWP System physical transceiver devices. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.14 |
wwpXcvrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.1 |
wwpXcvr OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.1.1 |
wwpXcvrTableThis table contains descriptions and settings for each of the physical transceiver devices. SEQUENCE OF WwpXcvrEntry .1.3.6.1.4.1.6141.2.14.1.1.1 |
wwpXcvrEntryThe Transciever Device Entry. WwpXcvrEntry .1.3.6.1.4.1.6141.2.14.1.1.1.1 |
wwpXcvrPortXcvrIdIndicates the logical port in-which this transciever belongs to.ro Integer32 .1.3.6.1.4.1.6141.2.14.1.1.1.1.1 |
wwpXcvrIdThe id for the transceiver.ro Integer32 .1.3.6.1.4.1.6141.2.14.1.1.1.1.2 |
wwpXcvrFiberTypeThe fiber type of this transceiver. Possible values: lx 1000BASE-LX fiber sx 1000BASE-SX fiber cx 1000BASE-CX fiber t 1000BASE-T unknown Unknown typero Enumeration .1.3.6.1.4.1.6141.2.14.1.1.1.1.3 |
wwpXcvrVendorNameString containing this transceiver's vendor name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.14.1.1.1.1.4 |
wwpXcvrPartNumString containing this transceiver's part number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.14.1.1.1.1.5 |
wwpXcvrPartRevString containing this tranceiver's part revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.14.1.1.1.1.6 |
wwpXcvrTxEnabledIndicates whether this transceiver is currently set to transmit.rw Enumeration .1.3.6.1.4.1.6141.2.14.1.1.1.1.7 |
wwpXcvrRxSignalStatusIndicates whether this transceiver is currently detecting a Receive (RX) signal.ro Enumeration .1.3.6.1.4.1.6141.2.14.1.1.1.1.8 |
wwpXcvrTxFaultStatusIndicates the fault status of this transceiver.ro Enumeration .1.3.6.1.4.1.6141.2.14.1.1.1.1.9 |
wwpXcvrPortTableThe table contains of the logical ports which have transceivers. SEQUENCE OF WwpXcvrPortEntry .1.3.6.1.4.1.6141.2.14.1.1.2 |
wwpXcvrPortEntryThe logical Port Entry. WwpXcvrPortEntry .1.3.6.1.4.1.6141.2.14.1.1.2.1 |
wwpXcvrPortIdIndicates the logical port in-which this transciever belongs to.ro Integer32 .1.3.6.1.4.1.6141.2.14.1.1.2.1.1 |
wwpXcvrPortHoldDownTimeIndicates the hold-down time (in seconds) for this logical port. This value is used to help smooth out possible flapping between XCVRs of the bank when a link goes down. When this HoldDown timer expires, the selected XCVR(in link-down state) may attempt to select the adjacent XCVR of the bank.rwdeprecated Integer32 .1.3.6.1.4.1.6141.2.14.1.1.2.1.2 |
wwpXcvrPortRedOrDiagModeThis object can be used to bring the Xcvr to the Manual mode. This also shows the port redundancy status for this logical port.rw Enumeration .1.3.6.1.4.1.6141.2.14.1.1.2.1.3 |
wwpXcvrPortPreferredXcvrIndicates which transceiver is preferred. This transceiver will be used by default, but if it goes down, the alternate will be used.rw Integer32 .1.3.6.1.4.1.6141.2.14.1.1.2.1.4 |
wwpXcvrPortActiveXcvrIndicates which transceiver is currently active.ro Integer32 .1.3.6.1.4.1.6141.2.14.1.1.2.1.5 |
wwpXcvrNotif OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.1.2 |
wwpXcvrEventTypeIndicates if the Xcvr specified by the wwpXcvrPortId and wwpXcvrId has come up, gone down or has been selected. This object only make sense for wwpXcvrLinkStateChangeNotification and should return none otherwise.ro Enumeration .1.3.6.1.4.1.6141.2.14.1.2.1 |
wwpXcvrErrorTypeIndicates if the Xcvr specified by the wwpXcvrPortId and wwpXcvrId is faulted because of checksum failed or optical fault. This object only make sense if some xcvr has been detected faulted otherwise it returns none.ro Enumeration .1.3.6.1.4.1.6141.2.14.1.2.2 |
wwpXcvrMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.2 |
wwpXcvrMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.2.0 |
wwpXcvrLinkStateChangeNotificationA wwpXcvrLinkStateChangeNotification is sent if the Xcvr state has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.14.2.0.4 |
wwpXcvrErrorTypeNotificationA wwpXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specifed by wwpXcvrErrorType. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.14.2.0.5 |
wwpXcvrMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.3 |
wwpXcvrMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.3.1 |
wwpXcvrMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.14.3.2 |