WWP-VOIP-MIB
Imported Objects
Objects
19 total| Object Name |
|---|
wwpVoipMIBThis MIB module is for Voice Over IP feature on WWP Products MODULE-IDENTITY .1.3.6.1.4.1.6141.2.15 |
wwpVoipMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.1 |
wwpVoip OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.1.1 |
wwpVoipTableThe conceptual table listing all the Voice Over Ip Entries. SEQUENCE OF WwpVoipEntry .1.3.6.1.4.1.6141.2.15.1.1.1 |
wwpVoipEntryAn entry in the wwpVoipTable. WwpVoipEntry .1.3.6.1.4.1.6141.2.15.1.1.1.1 |
wwpVoipIndexIndex for the the Voip Entry.ro INTEGER .1.3.6.1.4.1.6141.2.15.1.1.1.1.1 |
wwpVoipDownLoaderVersionThe Downloader version for this VOIP entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.15.1.1.1.1.2 |
wwpVoipApplicationVersionThe Aplication version for this VOIP entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.15.1.1.1.1.3 |
wwpVoipPortNumThe Port Number for the VOIP.ro INTEGER .1.3.6.1.4.1.6141.2.15.1.1.1.1.4 |
wwpVoipIpAddrThe IP Address for the VOIP Entry.ro IpAddress .1.3.6.1.4.1.6141.2.15.1.1.1.1.5 |
wwpVoipNumResetsThe number of times the VOIP processor has been reset.ro Integer32 .1.3.6.1.4.1.6141.2.15.1.1.1.1.6 |
wwpVoipCallAgentAddrThe IP address of the call agent to which this VOIP aplication is connected to.ro IpAddress .1.3.6.1.4.1.6141.2.15.1.1.1.1.7 |
wwpVoipResetOpThis object reset the VOIP Aplication. A read on this object always returns 'none'.rw Enumeration .1.3.6.1.4.1.6141.2.15.1.1.1.1.8 |
wwpVoipMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.2 |
wwpVoipMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.2.0 |
wwpVoipDiagFailNotificationA wwpVoipDiagFailNotification is sent if T2 VOIP ASIC fails diagnostics. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.15.2.0.1 |
wwpVoipMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.3 |
wwpVoipMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.3.1 |
wwpVoipMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.15.3.2 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →SNMP MIB module
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
SNMP MIB module
SNMP MIB module
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.