WWP-VOICE-GATEWAY-MIB
AI MIB Summary
The WWP-VOICE-GATEWAY-MIB defines managed objects for monitoring and configuring voice gateway hardware and services, specifically tracking VoIP session states, call quality metrics, and interface status for WWP voice gateway devices.
This MIB module degines the managed objects for WWP voice gateway.
Main OID:
wwpVoiceGatewayMIB.1.3.6.1.4.1.6141.2.43
107
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
wwpVoiceGatewayMIBThis MIB module degines the managed objects for WWP voice gateway. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.43 |
wwpVoiceGatewayMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1 |
wwpVoiceGateway OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1 |
wwpVoiceGatewayMGCP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.1 |
wwpVoiceGatewayEndPointTableA table of the voice gateway endpoints. SEQUENCE OF WwpVoiceGatewayEndPointEntry .1.3.6.1.4.1.6141.2.43.1.1.1.1 |
wwpVoiceGatewayEndPointEntryAn entry of the voice gateway endpoint. WwpVoiceGatewayEndPointEntry .1.3.6.1.4.1.6141.2.43.1.1.1.1.1 |
wwpVoiceGatewayEndPointIdIndex for the the endpoint entry.ro Integer32 .1.3.6.1.4.1.6141.2.43.1.1.1.1.1.1 |
wwpVoiceGatewayEndpointThe endpoint for the voice Gateway. This object should be set to a zero length string if the Management Station wish to use the Endpoint's IP Address as the Endpoint Domain Name. Endpoint identifiers have two parts: The domain name of the gateway that is managing the endpoint. A local name within the gateway. The local name is hierarchical, for example, the local name of circuit number 13 in a multiplexed trunk that is connected to the physical interface named XYZ would be named as XYZ/13.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.1.1.1.2 |
wwpVoiceGatewayCallAgentAddrThis object is used to configure either the domain name or the IP address of the Call Agent in standard dot notation. The complete address of a default call agent is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayCallAgentAddr specifies address of the Call Agent to which RSIP(RestartInProgress) message is sent whenever system starts up or line goes up. Call agent address may be an IP address or fully qualified domain name (FQDN). This object should be set to zero length string if the Management Stations wish to attempt to obtain the CA address from a DNS server (highest priority MGCP CA is chosen).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.1.2 |
wwpVoiceGatewayCallAgentUDPPortThis object is used to configure the UDP port of the Call Agent. The UDP port is used together with wwpVoiceGatewayCallAgentAddr to specify the destination address of the call agent to which RSIP message is sent when system starts up or line goes up.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.1.3 |
wwpVoiceGatewayCallAgentProtocolSetting this object to 'rfc2705' will enable support of RFC 2705 for this CallAgent (Only 'L' Event Package). Setting this object to 'ncs1.0' will enable support of PacketCable NCS 1.0 for the CallAgent. Setting this object to 'mgcp1Ncs1NoPackages' will enable support of Mgcp 1.0 Ncs 1.0 no event package for the CallAgent.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.1.4 |
wwpVoiceGatewaySupportMessagePiggybackingSetting this object to 'false' will disable message Piggybacking for this Voice Gateway.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.1.5 |
wwpVoiceGatewayRsipKeepAliveEnableSetting this object to 'enable' will configure the device to send periodic RSIP x-keepalive messages.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.1.6 |
wwpVoiceGatewayRsipKeepAliveIntervalConfigures the interval at which RSIP x-keepalive messages are transmittedrw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.1.7 |
wwpVoiceGatewayCountry OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.2 |
wwpVoiceGatewayCountryCodesThis object specifies the country for different tone and ring settings.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.2.1 |
wwpVoiceGatewayCodec OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.3 |
wwpVoiceGatewayComplexCodecSetting this object to 'g711(0)' will only enable G711U and G711A Codec. If this object is set to 'g729(3)', then G729A and G729AB Codec will be used.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.3.1 |
wwpVoiceGatewaySilenceSuppressionSetting this object to 'false' will disable the silence suppression for the complex codes specified by wwpVoiceGatewayComplexCodec.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.3.2 |
wwpVoiceGatewayEchoCancellationSetting this object to 'false' will disable the echo cancellation for the complex codes specified by wwpVoiceGatewayComplexCodec.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.3.3 |
wwpVoiceGatewayPacketizationMinPeriodMin packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.rw Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.3.4 |
wwpVoiceGatewayPacketizationMaxPeriodMax packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.rw Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.3.5 |
wwpVoiceGatewayAudio OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.4 |
wwpVoiceGatewayPayloadTypeThe Payload Format for the telephone events.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.4.1 |
wwpVoiceGatewaySendEventsViaRFC2833Setting this object to 'true' will cause the voice gateway to send Telephone Events via RFC2833 signalling using wwpVoiceGatewayPayloadType.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.4.2 |
wwpVoiceGatewayDropVoicePktsDuringEventsSetting this object to 'true' will cause the voice gateway to drop voice packets during RFC2833 Telephone Event packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.4.3 |
wwpVoiceGatewaySquelchInbandDtmfAudioSetting this object to 'true' will cause the voice gateway to Squelch the Inband DTMF Audio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.4.4 |
wwpVoiceGatewayStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.5 |
wwpVoiceGatewayPktsTxThe total number of RTP data packets transmitted by the voice gateway since starting transmission on this connection.ro Counter32 .1.3.6.1.4.1.6141.2.43.1.1.5.1 |
wwpVoiceGatewayOctetsTxThe total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.ro Counter32 .1.3.6.1.4.1.6141.2.43.1.1.5.2 |
wwpVoiceGatewayPktsRxThe total number of RTP data packets received by the voice gateway since starting reception on this connection.ro Counter32 .1.3.6.1.4.1.6141.2.43.1.1.5.3 |
wwpVoiceGatewayOctetsRxThe total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.ro Counter32 .1.3.6.1.4.1.6141.2.43.1.1.5.4 |
wwpVoiceGatewayPktsLostThe total number of RTP data packets that have been lost since the beginning of reception. This number is defined to be the number of packets expected less the number of packets actually received, where the number of packets received includes any which are late or duplicates.ro Counter32 .1.3.6.1.4.1.6141.2.43.1.1.5.5 |
wwpVoiceGatewayIntervalJitterAn estimate of the statistical variance of the RTP data packet interarrival time measured in milliseconds and expressed as an unsigned integer. The interarrival jitter J is defined to be the mean deviation (smoothed absolute value) of the difference D in packet spacing at the receiver compared to the sender for a pair of packets.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.5.6 |
wwpVoiceGatewayLatencyAn estimate of the network latency, expressed in milliseconds. This is the average value of the difference between the NTP timestamp indicated by the senders of the RTCP messages and the NTP timestamp of the receivers, measured when this messages are received.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.5.7 |
wwpVoiceGatewayResetStatCountersTo reset voice statistic counters , this object should be set to 'reset'. A read on this object should return none(0).rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.5.8 |
wwpVoiceReset OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.6 |
wwpVoiceGatewayNumResetsThis object defines the number of times that the voice gateway has been restarted.ro Unsigned32 .1.3.6.1.4.1.6141.2.43.1.1.6.1 |
wwpVoiceGatewayResetWriting one of the specified values to this field causes the specified type of reboot to occur. none is the value returned when this leaf is queried. writing this value to the leaf will have no effect. reset causes the voice gateway to restart using its current configuration. resetDefault will reset the voice gateway to factory defaults.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.6.2 |
wwpVoiceSec OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.7 |
wwpVoiceAccessSetting this object to 'deny' will disable access to VMI from SMI when connected via Telnet or console.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.7.1 |
wwpMgmtAccessSetting this object to 'deny' will disable access to SMI from VMI when connected via Telnet or console.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.7.2 |
wwpVoiceGatewayConfigCallAgent OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.8 |
wwpVoiceCallAgentOtaModesSetting this object to 'ifOtaRecv' will configure the device to send OTA if and only if OTA is received from call Agent. Setting this object to 'sendOta' will configure the device to always send OTA sdp parameters.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.8.1 |
wwpVoiceCallAgentEgressEventSetting this object to 'sendIngressEgressNotif' will configure the device to send ingress and egress fax and modem tone notification. Setting this object to 'sendIngressNotif' will configure the device to send only ingress fax and modem tone notification.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.8.2 |
wwpVoiceGatewayConfigPots OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.9 |
wwpVoiceCallAgentPotsLineSetting this object to 'enable1PotLine' will configure the device to enable Line 1 only. Setting this object to 'enable2PotLine' will configure the device to enable 2 pots lines. Device 'may' require reboot to enable pot line changes.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.9.1 |
wwpVoiceGatewayConfigFax OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.10 |
wwpVoiceAutonomousFaxStateSetting this object to 'enable' will configure the device to enable autonomous fax behavior. Setting this object to 'disable' will configure the device to disable autonomous fax behavior.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.10.1 |
wwpVoiceGatewayConfigEndPoint OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.11 |
wwpVoiceEndPointNameSetting this object will control how a voip endpoint name will be determined. This object cannot be set to 'unknown'.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.11.1 |
wwpVoiceGatewayConfigNotifEntityCache OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.12 |
wwpVoiceNotifEntCacheTimeout in minutes for cached DNS lookups for MGCP RQNT Notified Entity fieldrw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.12.1 |
wwpVoiceGatewayConfigJitterBuffer OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.13 |
wwpVoiceJitterOptionStateSetting this object to 'enable' will configure the jitter buffer to change to an adaptive jitter buffer size. Setting this object to 'disable' will configure the jitter buffer to use a fixed jitter buffer size.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.13.1 |
wwpVoiceGatewayConfigJitterBufferMinPeriod OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.14 |
wwpVoiceJitterBufferMinPeriodMinimum Holding time. Setting this value will limit the jitter buffer from adapting below this value. The smallest period is fixed at 20ms.rw Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.14.1 |
wwpVoiceGatewayConfigJitterBufferMaxPeriod OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.15 |
wwpVoiceJitterBufferMaxPeriodMaximum Holding time. Setting this value will limit the jitter buffer from adapting above this value. The largest period is fixed at 300ms.rw Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.15.1 |
wwpVoiceGatewayConfigJitterBufferTargetPeriod OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.16 |
wwpVoiceJitterBufferTargetPeriodTarget Holding time. Setting this value sets the initial jitter buffer size.rw Integer32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.43.1.1.16.1 |
wwpVoiceGatewayConfigCodecOverride OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.17 |
wwpVoiceGatewayCodecOverrideSelecting data codec override forces the default data codec to the specified value, overriding the standard default data codec which is tied to country code. 1 = force specification of G711 PCMU as default codec 2 = force specification of G711 PCMA as default codecrw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.17.1 |
wwpVoiceGatewayConfigTestServerConnection OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.18 |
wwpVoiceGatewayTestServerConnectionWriting one of the specified values to this field causes mesages to be sent to voice server to test connectivityrw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.18.1 |
wwpVoiceGatewayConfigLastServerResponseTime OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.19 |
wwpVoiceGatewayLastServerResponseTimeLast server response timestamp. Used as part of testing voice server connectivityro OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.19.1 |
wwpVoiceGatewaySIP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20 |
wwpVoiceGatewaySipSessionTimeoutPeriodConfigures session expiration time in seconds. Set value to 0 to disablerw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.1 |
wwpVoiceGatewaySipRegisterTimeoutPeriodConfigures registration expiration time in seconds. Used only when registrar is used. Set value to 0 to disable.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.2 |
wwpVoiceGatewaySipForceQuotesStateConfiguration to force display names to be embraced by double quotes.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.20.3 |
wwpVoiceGatewaySipPhoneLineTableSIP Pots Line table This table confures users for each POTs line SEQUENCE OF WwpVoiceGatewaySipPhoneLineEntry .1.3.6.1.4.1.6141.2.43.1.1.20.4 |
wwpVoiceGatewaySipPhoneLineEntrytable of sip line configuration WwpVoiceGatewaySipPhoneLineEntry .1.3.6.1.4.1.6141.2.43.1.1.20.4.1 |
wwpVoiceGatewaySipLineIdPots port Idro Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.1 |
wwpVoiceGatewaySipPhoneNumberPhone Number associated with this line.rw OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.2 |
wwpVoiceGatewaySipUserNameUser Name associated with this line.rw OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.3 |
wwpVoiceGatewaySipUserDisplayNameUser Display Name associated with this line.rw OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.4 |
wwpVoiceGatewaySipUserPasswordUser Password associated with this line.rw OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.5 |
wwpVoiceGatewaySipDialPlanConfiguration for dial plan expression string. Note: subset of unix regular expressions supported.rw OCTET STRING .1.3.6.1.4.1.6141.2.43.1.1.20.4.1.6 |
wwpVoiceGatewaySipPhoneLineTimerTableSIP Pots Line table This table configures users for each POTs line SEQUENCE OF WwpVoiceGatewaySipPhoneLineTimerEntry .1.3.6.1.4.1.6141.2.43.1.1.20.5 |
wwpVoiceGatewaySipPhoneLineTimerEntryTable of sip phone line configuration WwpVoiceGatewaySipPhoneLineTimerEntry .1.3.6.1.4.1.6141.2.43.1.1.20.5.1 |
wwpVoiceGatewaySipTimerLineIdPots port Idro Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.5.1.1 |
wwpVoiceGatewaySipDialTimerLongLong Timeout for SIP dialingrw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.5.1.2 |
wwpVoiceGatewaySIPServers OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20.6 |
wwpVoiceGatewaySIPProxyServers OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20.6.1 |
wwpVoiceGatewaySipProxyAddrThe complete address of a default Proxy is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Proxy server to which SIP messages are sent. Proxy address may be an IP address or fully qualified domain name (FQDN).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.20.6.1.1 |
wwpVoiceGatewaySipProxyPortThis object is used to configure the UDP port of the SIP Proxy Server. The UDP port is used together with wwpVoiceGatewaySipProxyAddr to specify the destination address of the Proxy to which SIP messages are sent.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.6.1.2 |
wwpVoiceGatewaySIPRegistrarServers OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20.6.2 |
wwpVoiceGatewaySipRegistrarAddrThe complete address of a default Registrar is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Regsitrar to which SIP Registration messages are sent whenever system starts or line goes up. Registrar address may be an IP address or fully qualified domain name (FQDN).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.20.6.2.1 |
wwpVoiceGatewaySipRegistrarPortThis object is used to configure the UDP port of the SIP Registrar. The UDP port is used together with wwpVoiceGatewaySipRegistrarAddr to specify the destination addressto which SIP Registration messages are sent when system starts or line goes up.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.6.2.2 |
wwpVoiceGatewaySIPLogServers OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20.6.3 |
wwpVoiceGatewaySipSyslogAddrThe complete address of a default SIP SysLog server is composed of IP address/Domain Name and UDP port. wwpVoiceGatewaySipSyslogAddr specifies address of the SIP SysLog server to which SIP Log messages are sent. SysLog server address may be an IP address or fully qualified domain name (FQDN).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.20.6.3.1 |
wwpVoiceGatewaySipSyslogPortThis object is used to configure the UDP port of the SIP Log Servert. The UDP port is used together with wwpVoiceGatewaySipSyslogAddr to specify the destination address to which SIP Log mesaages are sent when system starts or line goes up.rw Integer32 .1.3.6.1.4.1.6141.2.43.1.1.20.6.3.2 |
wwpVoiceGatewaySipSyslogLogLevelThis object is used to configure the log level or verbosity of the SIP messagesrw INTEGER .1.3.6.1.4.1.6141.2.43.1.1.20.6.3.3 |
wwpVoiceGatewaySIPPreferredCodecConfiguration to set preferred codec.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.20.7 |
wwpVoiceGatewaySIPDtmfEventHandlingConfiguration for device to send DTMF digits via SIP INFO message or in RTP RFC2833 event message in addition to the audio tone in RTP stream. The default is always an audio tone sent in the RTP stream.rw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.20.8 |
wwpVoiceGatewaySIPCallFeatures OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.20.9 |
wwpVoiceGatewayHookFlashEnableSetting this object to 'true' will configure the device to process hook flash events.. Setting this object to 'false' will configure the device to ignore hookflash events.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.20.9.1 |
wwpVoiceGatewayConfigProtocolType OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.21 |
wwpVoiceGatewayProtocolTypeConfiguration to select VoIP protocol. Setting this value to 'mgcp' will allow the configuration the MGCP funtionality. Setting this value to 'sip' will allow the configuration the SIP funtionalityrw Enumeration .1.3.6.1.4.1.6141.2.43.1.1.21.1 |
wwpVoiceGatewayConfigProtocolEnable OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.1.1.22 |
wwpVoiceGatewayProtocolEnableConfiguration to enable VoIP protocol. Setting this value to 'enable' will cause VoIP stack to start at bootuprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.43.1.1.22.1 |
wwpVoiceGatewayMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.2 |
wwpVoiceGatewayMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.2.0 |
wwpVoiceGatewayMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.3 |
wwpVoiceGatewayMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.3.1 |
wwpVoiceGatewayMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.43.3.2 |