WWP-SYSTEM-MIB

The MIB module for the WWP System specific information. This MIB provide additional information to whatever is provided by the standard system group.

Main OID:

wwpSystemMIB.1.3.6.1.4.1.6141.2.2

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

WWP-SMI

Objects

23 total

Object Name	Syntax	OID
wwpSystemMIBThe MIB module for the WWP System specific information. This MIB provide additional information to whatever is provided by the standard system group. MODULE-IDENTITY `.1.3.6.1.4.1.6141.2.2`	MODULE-IDENTITY	`.1.3.6.1.4.1.6141.2.2`
wwpSystemMIBObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1`
wwpSystemClock OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1.1`
wwpSysClockDateTimeThe current system date and time of box. There are no privisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, per rfc1903.rw DateAndTime (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.1.1`	DateAndTime (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.1.1`
wwpSysClockTimeOffsetValue used in conjunction with the universal coordinated time (UTC) during the creation of caller ID messages. The value of this object can also be modified by the DHCP using the Time Offset Option.rw Integer32 `.1.3.6.1.4.1.6141.2.2.1.1.2`	Integer32	`.1.3.6.1.4.1.6141.2.2.1.1.2`
wwpSystemBootp OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1.2`
wwpSystemBootpMsgFreqDefines how frequently (in seconds) that bootp messages are sent to the host.rwdeprecated Unsigned32 `.1.3.6.1.4.1.6141.2.2.1.2.1`	Unsigned32	`.1.3.6.1.4.1.6141.2.2.1.2.1`
wwpSystemAttr OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1.3`
wwpSystemStartMacAddrBase MAC address for the device, from which all other mac addresses are derived.ro MacAddress (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.3.1`	MacAddress (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.3.1`
wwpSystemDefaultGatewayDefault gateway IP address.rw IpAddress `.1.3.6.1.4.1.6141.2.2.1.3.2`	IpAddress	`.1.3.6.1.4.1.6141.2.2.1.3.2`
wwpSystemTftpServerHas the TFTP Server host name assigned by the bootp server, and later used for subsequent bootp requests.rw IpAddress `.1.3.6.1.4.1.6141.2.2.1.3.3`	IpAddress	`.1.3.6.1.4.1.6141.2.2.1.3.3`
wwpSystemBootFileName of the dhcp cmd file for the system.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.3.4`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.3.4`
wwpSystemInterfaceHostNameHost name for vmi or smi interface.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.3.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.3.5`
wwpSystemCfg OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1.4`
wwpSystemCfgControlControls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. updatePasswords: to update the current password file with the new password file. The new passwords will become active immediately. updateSnmpCfg: to update the current snmp configuration data. The new configuration will become active immediately. mfgDefaultCfg: Set system configuration to factory defaults. Note: this will wipe out all of the current configuration including Password and VLAN information. If the system doesn't support any of these control configuration option, it should return error while trying to set this object to the specific option. A read on this object should return none(0).rw Enumeration `.1.3.6.1.4.1.6141.2.2.1.4.1`	Enumeration	`.1.3.6.1.4.1.6141.2.2.1.4.1`
wwpSystemCfgFilepathReturns the path for configuration related files.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.4.2`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.4.2`
wwpSystemDebug OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.1.5`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.1.5`
wwpSystemConsolePortEnableSetting this object to 'true' will enable the console port.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.2.1.5.1`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.2.1.5.1`
wwpSystemMIBNotificationPrefix OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.2`
wwpSystemMIBNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.2.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.2.0`
wwpSystemMIBConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.3`
wwpSystemMIBCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.3.1`
wwpSystemMIBGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.2.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.2.3.2`

More MIBs from World Wide Packets

Browse all World Wide PacketsMIBs →

WWP-ESM-MIB

SNMP MIB module

454 objects→

WWP-LEOS-CFM-MIB

The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.

SNMP MIB module

SNMP MIB module

WWP-LEOS-PORT-STATS-MIB

The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.

253 objects→

WWP-LEOS-CHASSIS-MIB

The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.

233 objects→