WWP-RADIUS-CLIENT-MIB
AI MIB Summary
The WWP-RADIUS-CLIENT-MIB enables monitoring and configuration of RADIUS client parameters, authentication session states, and server connectivity metrics on WWP Radius Server appliances. It provides granular visibility into client registration status, accounting packet counters, and authentication failure rates to facilitate RADIUS infrastructure troubleshooting.
The MIB module for the WWP Radius Server specific configuration and monitoring information.
Main OID:
wwpRadiusClientMIB.1.3.6.1.4.1.6141.2.11
29
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
wwpRadiusClientMIBThe MIB module for the WWP Radius Server specific configuration and monitoring information. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.11 |
wwpRadiusClientMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.1 |
wwpRadiusClient OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.1.1 |
wwpRadiusClientTimeoutThis is the time in seconds between retransmissions to the RADIUS server.rw Integer32 .1.3.6.1.4.1.6141.2.11.1.1.1 |
wwpRadiusClientRetriesIndicates the number of times the RADIUS server should be tried before giving up on the server.rw Integer32 .1.3.6.1.4.1.6141.2.11.1.1.2 |
wwpRadiusServerTableLists the possible RADIUS servers. SEQUENCE OF WwpRadiusServerEntry .1.3.6.1.4.1.6141.2.11.1.1.3 |
wwpRadiusServerEntryRadius server entry. WwpRadiusServerEntry .1.3.6.1.4.1.6141.2.11.1.1.3.1 |
wwpRadiusServerIdIndex to the Radius Server Entry. The radius Servers are polled according to their ServerIds. If the ServerId 1 doesn't respond, then it tries for the next and hence on.ro Integer32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.1 |
wwpRadiusServerIpAddrIP Address of the RADIUS server.rw IpAddress .1.3.6.1.4.1.6141.2.11.1.1.3.1.2 |
wwpRadiusServerAuthPortThe destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.3 |
wwpRadiusClientRoundTripTimeThe time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6141.2.11.1.1.3.1.4 |
wwpRadiusClientAccessRequestsThe number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.5 |
wwpRadiusClientAccessRetransmissionsThe number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.6 |
wwpRadiusClientAccessAcceptsThe number of RADIUS Access-Accept packets (valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.7 |
wwpRadiusClientAccessRejectsThe number of RADIUS Access-Reject packets (valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.8 |
wwpRadiusClientAccessChallengesThe number of RADIUS Access-Challenge packets (valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.9 |
wwpRadiusClientMalformedAccessResponsesThe number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as malformed access responses.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.10 |
wwpRadiusClientBadAuthenticatorsThe number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.11 |
wwpRadiusClientPendingRequestsThe number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Acess-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.ro Gauge32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.12 |
wwpRadiusClientTimeoutsThe number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.13 |
wwpRadiusClientUnknownTypesThe number of RADIUS packets of unknown type which were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.14 |
wwpRadiusClientPacketsDroppedThe number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.6141.2.11.1.1.3.1.15 |
wwpRadiusServerStatusTo create a row in this table, a manager must set this object to either createAndGo(4). A row in the WwpRadiusServerEntry can't be set to active until wwpRadiusServerIpAddr has been set to valid value. To disable a Radius server , the operator can set this object to 'notInSerVice' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.11.1.1.3.1.16 |
wwpRadiusClientAuthKeyThe Auth Key to be used for Radius Servers. Retrieving the value of this object via SNMP will return an empty string for security reasons.rw OCTET STRING .1.3.6.1.4.1.6141.2.11.1.1.4 |
wwpRadiusClientMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.2 |
wwpRadiusClientMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.2.0 |
wwpRadiusClientMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.3 |
wwpRadiusClientMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.3.1 |
wwpRadiusClientMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.11.3.2 |