WWP-QOS-410-MIB
The MIB module for the WWP QOS specific information.
Main OID:
wwpQos410MIB.1.3.6.1.4.1.6141.2.29
38
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
wwpQos410MIBThe MIB module for the WWP QOS specific information. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.29 |
wwpQos410MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.1 |
wwpQos410 OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.1.1 |
wwpQos410TableA Table of QOS per vlan per port Entries. SEQUENCE OF WwpQos410Entry .1.3.6.1.4.1.6141.2.29.1.1.1 |
wwpQos410EntryThe QOS per vlan per port Entry in the Table. WwpQos410Entry .1.3.6.1.4.1.6141.2.29.1.1.1.1 |
wwpQos410VlanIdVlan ID for this instance of QOS. This Vlan Id should refer to the wwpVlanId in the WwpVlanEntry.ro VlanId .1.3.6.1.4.1.6141.2.29.1.1.1.1.1 |
wwpQos410IngressPortIdIngress Port ID for this instance of. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.29.1.1.1.1.2 |
wwpQos410EgressPortIdEgress Port ID for this instance of. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.29.1.1.1.1.3 |
wwpQos410MinRateLimitBandwidth guaranteed for this QOS entry, specified in 64Kb/s increments. The maximum value for this object is 8Gb/s, if this egress port is the lead port of a link aggregation group. The total of all QOS entries for this port cannot exceed the total bandwidth of the port or the set will fail.rw Integer32 .1.3.6.1.4.1.6141.2.29.1.1.1.1.4 |
wwpQos410MaxRateLimitBandwidth limit that cannot be exceeded by this QOS entry. The bandwidth is specified in 64Kb/s increments, with a maximum of 8Gb/s. The value specified cannot exceed the current bandwidth of the port. Values greater than 1 Gb/s can only be setup once a link agg group has been established.rw Integer32 .1.3.6.1.4.1.6141.2.29.1.1.1.1.5 |
wwpQos410QueueSizeThe size of the queue for this QOS entry.rw Enumeration .1.3.6.1.4.1.6141.2.29.1.1.1.1.6 |
wwpQos410WeightValue that is used to determine which QOS entries will receive the remaining bandwidth once Minimum Bandwidth requirements have been satisfied for all QOS entries. QOS entries with greater weight (smaller number) will receive a larger portion of this bandwidth.rw Enumeration .1.3.6.1.4.1.6141.2.29.1.1.1.1.7 |
wwpQos410RowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.29.1.1.1.1.8 |
wwpQos410StatsTableA Table of QOS Stats per vlan per ingress/egress port Entries. SEQUENCE OF WwpQos410StatsEntry .1.3.6.1.4.1.6141.2.29.1.1.2 |
wwpQos410StatsEntryThe QOS Stats per vlan per port Entry in the Table. WwpQos410StatsEntry .1.3.6.1.4.1.6141.2.29.1.1.2.1 |
wwpQos410StatsVlanIdVlan ID for this instance of QOS. This Vlan Id should refer to the wwpVlanId in the WwpVlanEntry.ro VlanId .1.3.6.1.4.1.6141.2.29.1.1.2.1.1 |
wwpQos410StatsIngressPortIdIngress Port ID for this instance of . Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.29.1.1.2.1.2 |
wwpQos410StatsEgressPortIdEgress Port ID for this instance of. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.29.1.1.2.1.3 |
wwpQos410StatsTypeDetermines which type of bytes to count, accepted bytes or discarded bytes for this QOS entry. The default will count accepted bytes.rw Enumeration .1.3.6.1.4.1.6141.2.29.1.1.2.1.4 |
wwpQos410RxBytesHiThe number of bytes received for this QOS Entry.This counter represents the upper 32 bits of the counter value.ro Counter32 .1.3.6.1.4.1.6141.2.29.1.1.2.1.5 |
wwpQos410RxBytesLoThe number of bytes received for this QOS Entry.This counter represents the lower 32 bits of the counter value.ro Counter32 .1.3.6.1.4.1.6141.2.29.1.1.2.1.6 |
wwpQos410PriToQMapTableA Table of mapping of an RX-priority to a TX-queue. SEQUENCE OF WwpQos410PriToQMapEntry .1.3.6.1.4.1.6141.2.29.1.1.3 |
wwpQos410PriToQMapEntryThe mapping Entry of an RX-priority to a TX-queue in the Table. WwpQos410PriToQMapEntry .1.3.6.1.4.1.6141.2.29.1.1.3.1 |
wwpQos410RxPriorityThe RX-prioroty value for this entry.ro Integer32 .1.3.6.1.4.1.6141.2.29.1.1.3.1.1 |
wwpQos410TxPriQueueThe TX-priority-queue value for this entry.rw Integer32 .1.3.6.1.4.1.6141.2.29.1.1.3.1.2 |
wwpQos410PortTableA Table of QOS per port Entries. SEQUENCE OF WwpQos410PortEntry .1.3.6.1.4.1.6141.2.29.1.1.4 |
wwpQos410PortEntryThe QOS per port Entry in the Table. WwpQos410PortEntry .1.3.6.1.4.1.6141.2.29.1.1.4.1 |
wwpQos410PortIndexPort ID for this instance of. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.29.1.1.4.1.1 |
wwpQos410PortProvisionedBWNumber of 64Kbps of bandwidth that is currently Provisioned for this port. This value is read-only and is updated each time a QOS entry is created for this port. If the port is a member of a Link Agg group and is not the lead port the value will be zero.ro Integer32 .1.3.6.1.4.1.6141.2.29.1.1.4.1.2 |
wwpQos410PortTotalBWNumber of 64Kbps of bandwidth that make up this port's total bandwidth. This value is read-only and is updated each time a QOS entry is created for this port. If the port is a member of a Link Agg group and this is not the lead port the value will be zero.ro Integer32 .1.3.6.1.4.1.6141.2.29.1.1.4.1.3 |
wwpQos410PortProvisionedNotifEnabledThis variable indicates whether the system generates the wwpQos410PortOverProvisionedTrap and wwpQos410PortUnderProvisionedTrap. A false value prevents this notifications from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.29.1.1.5 |
wwpQos410NotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.2 |
wwpQos410Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.2.0 |
wwpQos410PortOverProvisionedTrapA wwpQos410PortOverProvisionedTrap notification is sent when the provisioned bandwidth exceeds the total bandwidth available for a port. This situation may also occur when changes in a link aggregation group (such as deleting a port from the group) decrease the total bandwidth or at the bootTime when the link aggregation groups are formed. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.29.2.0.1 |
wwpQos410PortUnderProvisionedTrapA wwpQos410PortUnderProvisionedTrap notification is sent when the previously over-provisioned situation is resolved for a port. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.29.2.0.2 |
wwpQos410MIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.3 |
wwpQos410MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.3.1 |
wwpQos410MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.29.3.2 |