Home/Catalog/WWP-NTP-MIB

WWP-NTP-MIB

This MIB module defines the generic managed objects for NTP on WWP devices.

Main OID:

wwpNtpMIB.1.3.6.1.4.1.6141.2.5

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

WWP-SMI

Objects

15 total

Object Name	Syntax	OID
wwpNtpMIBThis MIB module defines the generic managed objects for NTP on WWP devices. MODULE-IDENTITY `.1.3.6.1.4.1.6141.2.5`	MODULE-IDENTITY	`.1.3.6.1.4.1.6141.2.5`
wwpNtpMIBObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.1`
wwpNtp OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.1.1`
wwpNtpRcvBroadcastsEnables or disables the reception of NTP broadcasts from a host. WWP products will only accept broadcasts from those NTP servers listed in the NTP table below.rw Enumeration `.1.3.6.1.4.1.6141.2.5.1.1.1`	Enumeration	`.1.3.6.1.4.1.6141.2.5.1.1.1`
wwpNtpEnablePollingEnables or disables NTP polling.rw Enumeration `.1.3.6.1.4.1.6141.2.5.1.1.2`	Enumeration	`.1.3.6.1.4.1.6141.2.5.1.1.2`
wwpNtpPollFreqWWP products can also be configured to poll a server for the current time every x seconds. pollTime is in seconds.rw Integer32 `.1.3.6.1.4.1.6141.2.5.1.1.3`	Integer32	`.1.3.6.1.4.1.6141.2.5.1.1.3`
wwpNtpServerTableTable of NTP server information. SEQUENCE OF WwpNtpServerEntry `.1.3.6.1.4.1.6141.2.5.1.1.4`	SEQUENCE OF WwpNtpServerEntry	`.1.3.6.1.4.1.6141.2.5.1.1.4`
wwpNtpServerEntryAn entry for each NTP server that the switch should be aware of. WwpNtpServerEntry `.1.3.6.1.4.1.6141.2.5.1.1.4.1`	WwpNtpServerEntry	`.1.3.6.1.4.1.6141.2.5.1.1.4.1`
wwpNtpServerIpAddrThe IP address of the NTP server.ro IpAddress `.1.3.6.1.4.1.6141.2.5.1.1.4.1.1`	IpAddress	`.1.3.6.1.4.1.6141.2.5.1.1.4.1.1`
wwpNtpServerRowStatusTo create a row in this table, a manager must set this object to 'createAndGo'.rw RowStatus (SNMPv2-TC) `.1.3.6.1.4.1.6141.2.5.1.1.4.1.2`	RowStatus (SNMPv2-TC)	`.1.3.6.1.4.1.6141.2.5.1.1.4.1.2`
wwpNtpMIBNotificationPrefix OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.2`
wwpNtpMIBNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.2.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.2.0`
wwpNtpMIBConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.3`
wwpNtpMIBCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.3.1`
wwpNtpMIBGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.6141.2.5.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6141.2.5.3.2`

More MIBs from World Wide Packets

Browse all World Wide PacketsMIBs →

WWP-ESM-MIB

SNMP MIB module

454 objects→

WWP-LEOS-CFM-MIB

The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.

SNMP MIB module

SNMP MIB module

WWP-LEOS-PORT-STATS-MIB

The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.

253 objects→

WWP-LEOS-CHASSIS-MIB

The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.

233 objects→