WWP-LEOS-TRAFFIC-PROFILE-MIB
AI MIB Summary
The WWP-LEOS-TRAFFIC-PROFILE-MIB monitors traffic profile statistics on Allied Telesis LEOS switches, specifically tracking accepted and dropped bytes for standard high-capacity access (HCA) sessions. This module provides granular visibility into bandwidth consumption and packet loss events within defined traffic profiles to support capacity planning and QoS validation.
Added objects wwpLeosTrafficProfileStdHCAcceptedBytes and wwpLeosTrafficProfileStdHCDroppedBytes.
Main OID:
wwpLeosTrafficProfileMIB.1.3.6.1.4.1.6141.2.60.27
157
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
wwpLeosTrafficProfileMIBAdded objects wwpLeosTrafficProfileStdHCAcceptedBytes and wwpLeosTrafficProfileStdHCDroppedBytes. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.27 |
wwpLeosTrafficProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.1 |
wwpLeosTrafficProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.1.1 |
wwpLeosTrafficProfileGlobalAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.1.1.1 |
wwpLeosTrafficProfileGlobalStateSetting this object to 'enabled' will enable traffic profile globally. Setting this object to 'disabled' will disable traffic profile globally.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.1.1 |
wwpLeosTrafficProfileGlobalMeterProvisioningStateSetting this object to 'pir' will allow meters to be provisioned in pir. Setting this object to 'eir' will allow meters to be provisioned in eir.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.1.2 |
wwpLeosTrafficProfilePortTableA table of traffic profile port entries. SEQUENCE OF WwpLeosTrafficProfilePortEntry .1.3.6.1.4.1.6141.2.60.27.1.1.2 |
wwpLeosTrafficProfilePortEntryA traffic profile entry in the wwpLeosTrafficProfilePortTable. WwpLeosTrafficProfilePortEntry .1.3.6.1.4.1.6141.2.60.27.1.1.2.1 |
wwpLeosTrafficProfilePortThis object specifies the port number also used as index in the table.ro INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.1 |
wwpLeosTrafficProfileAdminStateSetting this object to 'enabled' will administratively enable traffic profiling on the given port. Setting this object to 'disabled' will administratively disable traffic profiling on the given port.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.2 |
wwpLeosTrafficProfileOperStateThis object specifies operational state of the traffic profiling for a given port on the device.ro Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.3 |
wwpLeosTrafficProfileModeThis object specifies the mode of traffic profiling for a given port.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.4 |
wwpLeosTrafficProfileNonConformCascadedProfileThis object specifies that the device should map non-conformance traffic ingressing on a given port to cascaded profile specified by wwpLeosTrafficProfileNonConformCascadedProfile. This object will become effective only if device is running in cascaded profile mode. This object will be set to drop if using on a device that does not have cascaded-profilingrwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.5 |
wwpLeosTrafficProfileNonConformStdProfileThis object specifies that the device should map non-conformance traffic ingressing on a given port to standard profile specified by wwpLeosTrafficProfileNonConformStdProfile. This object will become effective only if device is running in standard profile mode.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.6 |
wwpLeosTrafficProfileArpCascadedProfileThis object specifies that the device should map ARP frames ingressing on a given port to cascaded profile specified by wwpLeosTrafficProfileArpCascadedProfile. This object will be set to bypass if using on a device that does not have cascaded-profiling.rwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.7 |
wwpLeosTrafficProfileArpStdProfileThis object specifies that the device should map ARP frames ingressing on a given port to standard profile specified by wwpLeosTrafficProfileArpStdProfile. This object will become effective only if device is running in standard profile mode.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.8 |
wwpLeosTrafficProfileMeterPoolThis object specifies the Meter Pool Index for a port.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.9 |
wwpLeosTrafficProfileClassifierModeThis object specifies how narrow or wide we classify traffic to a port's meters.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.2.1.10 |
wwpLeosTrafficProfileCascadedTableA table of cascaded traffic profile entries. To create an entry in this table the following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileCascadedCir must be specified - if wwpLeosTrafficProfileCascadedPir is not specified or is specified and is < wwpLeosTrafficProfileCascadedCir then device will make wwpLeosTrafficProfileCascadedPir = wwpLeosTrafficProfileCascadedCir - wwpLeosTrafficProfileCascadedStatus must be set to createandgodeprecated SEQUENCE OF WwpLeosTrafficProfileCascadedEntry .1.3.6.1.4.1.6141.2.60.27.1.1.3 |
wwpLeosTrafficProfileCascadedEntryA cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTable.deprecated WwpLeosTrafficProfileCascadedEntry .1.3.6.1.4.1.6141.2.60.27.1.1.3.1 |
wwpLeosTrafficProfileCascadedIndxThis object is used as index in the table and it represents profile index which can be 1 or 2 or 3.rodeprecated INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.3.1.1 |
wwpLeosTrafficProfileCascadedCirThis object specifies the cir associated with a given cascaded traffic profile. Units are kbps.rwdeprecated Integer32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.27.1.1.3.1.2 |
wwpLeosTrafficProfileCascadedPirThis object specifies the pir associated with a given cascaded traffic profile. Units are kbps.rwdeprecated Integer32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.27.1.1.3.1.3 |
wwpLeosTrafficProfileCascadedStatusSetting this object to 'createandgo' along with wwpLeosTrafficProfileCascadedCir and wwpLeosTrafficProfileCascadedPir will result in creating an cascaded traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.3.1.5 |
wwpLeosTrafficProfileStdTableA table of Std traffic profile entries. To create entry in this table following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileStdCir must be specified - if wwpLeosTrafficProfileStdPir is not specified or is specified and is < wwpLeosTrafficProfileStdCir then device will make wwpLeosTrafficProfileStdPir = wwpLeosTrafficProfileStdCir - wwpLeosTrafficProfileStdStatus must be set to createandgo SEQUENCE OF WwpLeosTrafficProfileStdEntry .1.3.6.1.4.1.6141.2.60.27.1.1.4 |
wwpLeosTrafficProfileStdEntryA standard traffic profile entry in the wwpLeosTrafficProfileStdTable. WwpLeosTrafficProfileStdEntry .1.3.6.1.4.1.6141.2.60.27.1.1.4.1 |
wwpLeosTrafficProfileStdIndxThis object is used as index in the table and it represents profile index which can be 1 through 64.ro INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.1 |
wwpLeosTrafficProfileStdCirThis object specifies the cir associated with a given standard traffic profile.rw Integer32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.2 |
wwpLeosTrafficProfileStdPirThis object specifies the pir associated with a given standard traffic profile.rw Integer32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.3 |
wwpLeosTrafficProfileStdNameThe name associated with this profile. This must be unique per port. The name does not have to be set on create. However, when updating the name, it must have some value - zero-string not support.rw DisplayString .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.4 |
wwpLeosTrafficProfileStdStatusSetting this object to 'createandgo' along with wwpLeosTrafficProfileStdCir and or wwpLeosTrafficProfileStdPir will result in creating an standard traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.5 |
wwpLeosTrafficProfileStdVlanThis object specifies the VLAN associated with a profile.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.6 |
wwpLeosTrafficProfileStdCbsThis object specifies the Commited burst size associated with a given standard traffic profile.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.7 |
wwpLeosTrafficProfileStdEbsThis object specifies the Excess burst size associated with a given standard traffic profile.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.8 |
wwpLeosTrafficProfileStdDscpRemarkPolicyLeave => Don't remark the frame. Fixed => Remark the DSCP of a frame with the fixed-dscp value for IP frames which classify to the Traffic Profilerw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.9 |
wwpLeosTrafficProfileStdFixedDscpFixed DSCP value to use for frames classifying to a Traffic Profile when the dscp-remark-policy id 'Fixedrw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.10 |
wwpLeosTrafficProfileStdUnsetVlanSetting This object to unset(1) unsets the VLAN associated with a profile. This object returns a value of none(0) on get.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.11 |
wwpLeosTrafficProfileStdDefaultProfileSetting this object to true(1) during createAndGo(4) will create Tier-1 default profile.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.12 |
wwpLeosTrafficeProfileStdDropSetting this value to true causes metering to cease and all traffic to drop.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.13 |
wwpLeosTrafficProfileStdParentIndexThis mib object is set when creating Child traffic profile to specify the parent indexrw Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.14 |
wwpLeosTrafficProfileStdChildModeWhen the port mode is hierarchical-vlan, then the valid child-modes are dot1dPri, ipprec, dscp. When the port mode is hierarchical-port then the valid childModes is dot1dPri, ipprec, dscp and vlan(4).rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.15 |
wwpLeosTrafficProfileStdStatsMonitorTo disable stats collection, set this object to off(2). To enable stats collection, set this object to on(1).rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.16 |
wwpLeosTrafficProfileStdUntaggedStateTo enable this profile to match untagged traffic set this to on(1). To disable, set to off(2)rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.17 |
wwpLeosTrafficProfileStdVsThe virtual-switch name associated with this profile. The virtual-switch name must exist before using it as a profile classifier.rw DisplayString .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.18 |
wwpLeosTrafficProfileStdRemarkColorPolicyThis sets the profile's color remarking policy at the meter output.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.19 |
wwpLeosTrafficProfileStdRemarkRcosPolicyThis sets the profile's rcos remarking policy based on meter color.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.20 |
wwpLeosTrafficProfileStdYellowRemarkRcosThis sets the profile's rcos remarking policy based on meter color.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.21 |
wwpLeosTrafficProfileStdGreenRemarkRcosThis sets the profile's rcos remarking policy based on meter color.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.22 |
wwpLeosTrafficProfileStdIngressColorAwareThis sets the profile's meter ingress color awareness.rw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.23 |
wwpLeosTrafficProfileStdEirThis object specifies the eir associated with a given standard traffic profile. Sets/Gets on this are only valid when the global meter-provisioning mode is set to eir. All other times it will be ignored and return 0rw Integer32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.27.1.1.4.1.24 |
wwpLeosTrafficProfileStdDot1dTableA table of Std dot1d traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDot1dToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdDot1dEntry .1.3.6.1.4.1.6141.2.60.27.1.1.5 |
wwpLeosTrafficProfileStdDot1dEntryA standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable. WwpLeosTrafficProfileStdDot1dEntry .1.3.6.1.4.1.6141.2.60.27.1.1.5.1 |
wwpLeosTrafficProfileStdDot1dThis object specifies the dot1d priority for the associated standard profile entry in the wwpLeosTrafficProfileStdDot1dTable table.ro INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.5.1.1 |
wwpLeosTrafficProfileStdDot1dToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdDot1d must be mapped to.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.5.1.2 |
wwpLeosTrafficProfileStdDot1dStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDot1dToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.5.1.3 |
wwpLeosTrafficProfileStdIpPrecTableA table of standard ip precedence traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'. - set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdIpPrecEntry .1.3.6.1.4.1.6141.2.60.27.1.1.6 |
wwpLeosTrafficProfileStdIpPrecEntryA standard ip precedence traffic profile entry in the wwpLeosTrafficProfileStdTable. WwpLeosTrafficProfileStdIpPrecEntry .1.3.6.1.4.1.6141.2.60.27.1.1.6.1 |
wwpLeosTrafficProfileStdIpPrecThis object specifies the ip precedence for the associated standard profile entry in wwpLeosTrafficProfileStdTable.ro INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.6.1.1 |
wwpLeosTrafficProfileStdIpPrecToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdIpPrec must be mapped to.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.6.1.2 |
wwpLeosTrafficProfileStdIpPrecStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'. - set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.6.1.3 |
wwpLeosTrafficProfileStdPhbTableA table of standard phb traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'. - set wwpLeosTrafficProfileStdPhbToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdPhbEntry .1.3.6.1.4.1.6141.2.60.27.1.1.7 |
wwpLeosTrafficProfileStdPhbEntryA standard Phb traffic profile entry in the wwpLeosTrafficProfileStdTable. WwpLeosTrafficProfileStdPhbEntry .1.3.6.1.4.1.6141.2.60.27.1.1.7.1 |
wwpLeosTrafficProfileStdPhbThis object specifies the diff-serv values for the associated standard profile entry in wwpLeosTrafficProfileStdTable.ro Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.7.1.1 |
wwpLeosTrafficProfileStdPhbToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdPhb must be mapped to.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.7.1.2 |
wwpLeosTrafficProfileStdPhbStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'. - set wwpLeosTrafficProfileStdPhbToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.7.1.3 |
wwpLeosTrafficProfileCascadedStatsTableA table of cascaded profile stats.deprecated SEQUENCE OF WwpLeosTrafficProfileCascadedStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.8 |
wwpLeosTrafficProfileCascadedStatsEntryA cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedStatsTable.deprecated WwpLeosTrafficProfileCascadedStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.8.1 |
wwpLeosTrafficProfileCascadedAcceptedBytesHiThis object specifies the higher bytes of accepted frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.1 |
wwpLeosTrafficProfileCascadedAcceptedBytesLoThis object specifies the lower bytes of accepted frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.2 |
wwpLeosTrafficProfileCascadedDroppedBytesHiThis object specifies the higher bytes of dropped frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.3 |
wwpLeosTrafficProfileCascadedDroppedBytesLoThis object specifies the lower bytes of dropped frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.4 |
wwpLeosTrafficProfileCascadedRemarkedBytesHiThis object specifies the higher bytes of remarked frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.5 |
wwpLeosTrafficProfileCascadedRemarkedBytesLoThis object specifies the lower bytes of remarked frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.8.1.6 |
wwpLeosTrafficProfileStdStatsTableA table of standard profile stats. SEQUENCE OF WwpLeosTrafficProfileStdStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.9 |
wwpLeosTrafficProfileStdStatsEntryThe entry in wwpLeosTrafficProfileStdStatsTable. WwpLeosTrafficProfileStdStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.9.1 |
wwpLeosTrafficProfileStdAcceptedBytesHiThis object specifies the higher bytes of accepted frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.1 |
wwpLeosTrafficProfileStdAcceptedBytesLoThis object specifies the lower bytes of accepted frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.2 |
wwpLeosTrafficProfileStdDroppedBytesHiThis object specifies the higher bytes of dropped frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.3 |
wwpLeosTrafficProfileStdDroppedBytesLoThis object specifies the higher bytes of dropped frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.4 |
wwpLeosTrafficProfileStdHCAcceptedBytesThis object specifies the bytes of accepted frame data by a given standard profile.ro Counter64 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.5 |
wwpLeosTrafficProfileStdHCDroppedBytesThis object specifies the bytes of dropped frame data by a given standard profile.ro Counter64 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.6 |
wwpLeosTrafficProfileStdHCAcceptedPacketsThis object specifies the number of packets passed by a standard profilero Counter64 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.7 |
wwpLeosTrafficProfileStdHCDroppedPacketsThis object specifies the number of packets dropped by a standard profilero Counter64 .1.3.6.1.4.1.6141.2.60.27.1.1.9.1.8 |
wwpLeosTrafficProfileCascadedGlobalTableA table of global attributes used by cascaded traffic profile table. To create entry in this table following criteria must be met. - All indexes must be specified. - wwpLeosTrafficProfileCascadedGlobalDot1d,wwpLeosTrafficProfileCascadedGlobalIpPrec and wwpLeosTrafficProfileCascadedGlobalDscp may be specified. - wwpLeosTrafficProfileCascadedGlobalName may be specified. - wwpLeosTrafficProfileCascadedGlobalStatus must be set to createandgodeprecated SEQUENCE OF WwpLeosTrafficProfileCascadedGlobalEntry .1.3.6.1.4.1.6141.2.60.27.1.1.10 |
wwpLeosTrafficProfileCascadedGlobalEntryA global cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedGlobalTable.deprecated WwpLeosTrafficProfileCascadedGlobalEntry .1.3.6.1.4.1.6141.2.60.27.1.1.10.1 |
wwpLeosTrafficProfileCascadedGlobalDot1dThis specifies the dot1d priority for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.rwdeprecated INTEGER (-1..7) .1.3.6.1.4.1.6141.2.60.27.1.1.10.1.1 |
wwpLeosTrafficProfileCascadedGlobalIpPrecThis specifies the ip precedence value for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.rwdeprecated INTEGER (-1..7) .1.3.6.1.4.1.6141.2.60.27.1.1.10.1.2 |
wwpLeosTrafficProfileCascadedGlobalDscpThis specifies the dscp value for a given cascaded traffic profile. If this object returns -1 then it means the value was not set by user and thus doesn't care.rwdeprecated INTEGER (-1..63) .1.3.6.1.4.1.6141.2.60.27.1.1.10.1.3 |
wwpLeosTrafficProfileCascadedGlobalNameThe name associated with this profile. This must be unique name per profile. The name does not have to be set on create. However, when updating the name, it must have some value - zero-string not support.rwdeprecated DisplayString .1.3.6.1.4.1.6141.2.60.27.1.1.10.1.4 |
wwpLeosTrafficProfileCascadedGlobalStatusSetting this object to 'createandgo' will result in creating an global cascaded traffic profile entry. Setting this object to 'destroy' will delete the entry from the table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.10.1.5 |
wwpLeosTrafficProfileCascadedTotalStatsTableA table of cascaded profile stats.deprecated SEQUENCE OF WwpLeosTrafficProfileCascadedTotalStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.11 |
wwpLeosTrafficProfileCascadedTotalStatsEntryA cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTotalStatsTable.deprecated WwpLeosTrafficProfileCascadedTotalStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.11.1 |
wwpLeosTrafficProfileCascadedTotalAcceptedBytesHiThis object specifies the higher bytes of accepted frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.1 |
wwpLeosTrafficProfileCascadedTotalAcceptedBytesLoThis object specifies the lower bytes of accepted frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.2 |
wwpLeosTrafficProfileCascadedTotalDroppedBytesHiThis object specifies the higher bytes of dropped frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.3 |
wwpLeosTrafficProfileCascadedTotalDroppedBytesLoThis object specifies the lower bytes of dropped frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.4 |
wwpLeosTrafficProfileCascadedTotalRemarkedBytesHiThis object specifies the higher bytes of remarked frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.5 |
wwpLeosTrafficProfileCascadedTotalRemarkedBytesLoThis object specifies the lower bytes of remarked frames of given cascaded profile.rodeprecated Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.11.1.6 |
wwpLeosTrafficProfileStdTotalStatsTableA table of standard profile stats. SEQUENCE OF WwpLeosTrafficProfileStdTotalStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.12 |
wwpLeosTrafficProfileStdTotalStatsEntryThe entry in wwpLeosTrafficProfileStdTotalStatsTable. WwpLeosTrafficProfileStdTotalStatsEntry .1.3.6.1.4.1.6141.2.60.27.1.1.12.1 |
wwpLeosTrafficProfileStdTotalAcceptedBytesHiThis object specifies the higher bytes of accepted frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.12.1.1 |
wwpLeosTrafficProfileStdTotalAcceptedBytesLoThis object specifies the lower bytes of accepted frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.12.1.2 |
wwpLeosTrafficProfileStdTotalDroppedBytesHiThis object specifies the higher bytes of dropped frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.12.1.3 |
wwpLeosTrafficProfileStdTotalDroppedBytesLoThis object specifies the higher bytes of dropped frames of given standard profile.ro Counter32 .1.3.6.1.4.1.6141.2.60.27.1.1.12.1.4 |
wwpLeosTrafficProfileStdVlanTableA table of Std Vlan Traffic Profile Entries. To create entry in the table following criteria must be met -- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'. -- set wwpLeosTrafficProfileStdVlan to valid profile. To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdVlanEntry .1.3.6.1.4.1.6141.2.60.27.1.1.14 |
wwpLeosTrafficProfileStdVlanEntryA standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable. WwpLeosTrafficProfileStdVlanEntry .1.3.6.1.4.1.6141.2.60.27.1.1.14.1 |
wwpLeosTrafficProfileStdVlanIndexThis object specifies the Vlan for the associated standard profile entry in wwpLeosTrafficProfileStdTable. INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.14.1.1 |
wwpLeosTrafficProfileStdVlanToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdVlan must be mapped to.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.14.1.2 |
wwpLeosTrafficProfileStdVlanStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'. - set wwpLeosTrafficProfileStdVlanToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.14.1.3 |
wwpLeosTrafficProfileStdDscpTableA table of standard Dscp traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDscpToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.15 |
wwpLeosTrafficProfileStdDscpEntryA standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable. WwpLeosTrafficProfileStdDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.15.1 |
wwpLeosTrafficProfileStdDscpThis object specifies the Dscp for the associated standard profile entry in wwpLeosTrafficProfileStdTable. INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.15.1.1 |
wwpLeosTrafficProfileStdDscpToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdDscp must be mapped to.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.15.1.2 |
wwpLeosTrafficProfileStdDscpStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'. - set wwpLeosTrafficProfileStdDscpToProfile to valid profile. To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.15.1.3 |
wwpLeosTrafficProfileMeterPoolTableA Table of Meter Pool SEQUENCE OF WwpLeosTrafficProfileMeterPoolEntry .1.3.6.1.4.1.6141.2.60.27.1.1.16 |
wwpLeosTrafficProfileMeterPoolEntryA Meter Pool Entry in wwpLeosTrafficProfileMeterPoolTable WwpLeosTrafficProfileMeterPoolEntry .1.3.6.1.4.1.6141.2.60.27.1.1.16.1 |
wwpLeosTrafficProfileMeterPoolIndexA Meter Pool Index INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.1 |
wwpLeosTrafficProfileMeterPoolNameA Meter Pool Namero DisplayString .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.2 |
wwpLeosTrafficProfileMeterPoolNumOfMetersNumber of Meters for a poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.3 |
wwpLeosTrafficProfileMeterPoolMetersUsedNumber of Used Meters in a Poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.4 |
wwpLeosTrafficProfileMeterPoolNumOfStatsNumber of Stats Counters for a poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.5 |
wwpLeosTrafficProfileMeterPoolStatsUsedNumber of Used Stats Counters in a Poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.6 |
wwpLeosTrafficProfileMeterPoolNumOfClassifiersNumber of Classifiers for a poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.7 |
wwpLeosTrafficProfileMeterPoolClassifiersUsedNumber of Used Classifiers in a Poolro Integer32 .1.3.6.1.4.1.6141.2.60.27.1.1.16.1.8 |
wwpLeosTrafficProfileTosStampTableA table of TosStamps entries. SEQUENCE OF WwpLeosTrafficProfileTosStampEntry .1.3.6.1.4.1.6141.2.60.27.1.1.20 |
wwpLeosTrafficProfileTosStampEntryThe entry in wwpLeosTrafficProfileTosStampTable. WwpLeosTrafficProfileTosStampEntry .1.3.6.1.4.1.6141.2.60.27.1.1.20.1 |
wwpLeosTrafficProfileTosStampStateThis object specifies the state of the TOS Stamp on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.20.1.1 |
wwpLeosTrafficProfileTosStampValueThis object specifies the Value of the TOS Stamp. For IP prec left shift the value by 3 bits.rw INTEGER .1.3.6.1.4.1.6141.2.60.27.1.1.20.1.2 |
wwpLeosTrafficProfileIpDscpTableA table of IpDscp entries. SEQUENCE OF WwpLeosTrafficProfileIpDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.21 |
wwpLeosTrafficProfileIpDscpEntryThe entry in wwpLeosTrafficProfileIpDscpTable. WwpLeosTrafficProfileIpDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.21.1 |
wwpLeosTrafficProfileIpp0Cs0StateThis object specifies the state of the Ipp0 or cs0 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.1 |
wwpLeosTrafficProfileIpp1Cs1StateThis object specifies the state of the Ipp1 or cs1 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.2 |
wwpLeosTrafficProfileIpp2Cs2StateThis object specifies the state of the Ipp0 or cs0 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.3 |
wwpLeosTrafficProfileIpp3Cs3StateThis object specifies the state of the Ipp3 or cs3 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.4 |
wwpLeosTrafficProfileIpp4Cs4StateThis object specifies the state of the Ipp4 or cs4 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.5 |
wwpLeosTrafficProfileIpp5Cs5StateThis object specifies the state of the Ipp5 or cs5 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.6 |
wwpLeosTrafficProfileIpp6Cs6StateThis object specifies the state of the Ipp6 or cs6 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.7 |
wwpLeosTrafficProfileIpp7Cs7StateThis object specifies the state of the Ipp7 or cs7 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.8 |
wwpLeosTrafficProfileAf1StateThis object specifies the state of the Af1 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.9 |
wwpLeosTrafficProfileAf2StateThis object specifies the state of the Af2 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.10 |
wwpLeosTrafficProfileAf3StateThis object specifies the state of the Af3 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.11 |
wwpLeosTrafficProfileAf4StateThis object specifies the state of the Af4 enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.12 |
wwpLeosTrafficProfileEfStateThis object specifies the state of the Ef enable disable on a portrw Enumeration .1.3.6.1.4.1.6141.2.60.27.1.1.21.1.13 |
wwpLeosTrafficProfileStdVlanDot1dTableA table of Std Vlan dot1d traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdVlanDot1dEntry .1.3.6.1.4.1.6141.2.60.27.1.1.40 |
wwpLeosTrafficProfileStdVlanDot1dEntryA standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable. WwpLeosTrafficProfileStdVlanDot1dEntry .1.3.6.1.4.1.6141.2.60.27.1.1.40.1 |
wwpLeosTrafficProfileStdVlanDot1dStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.40.1.1 |
wwpLeosTrafficProfileStdVlanIpPrecTableA table of Std Vlan-Ip prec traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdVlanIpPrecEntry .1.3.6.1.4.1.6141.2.60.27.1.1.41 |
wwpLeosTrafficProfileStdVlanIpPrecEntryA standard vlan-Ip prec traffic profile entry in the wwpLeosTrafficProfileStdVlanIpPrecTable. WwpLeosTrafficProfileStdVlanIpPrecEntry .1.3.6.1.4.1.6141.2.60.27.1.1.41.1 |
wwpLeosTrafficProfileStdVlanIpPrecStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.41.1.1 |
wwpLeosTrafficProfileStdVlanDscpTableA table of Std Vlan-dscp traffic profile entries. To create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy. SEQUENCE OF WwpLeosTrafficProfileStdVlanDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.42 |
wwpLeosTrafficProfileStdVlanDscpEntryA standard vlan-dscp traffic profile entry in the wwpLeosTrafficProfileStdVlanDscpTable. WwpLeosTrafficProfileStdVlanDscpEntry .1.3.6.1.4.1.6141.2.60.27.1.1.42.1 |
wwpLeosTrafficProfileStdVlanDscpStatusTo create entry in the table following criteria must be met - set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'. To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.27.1.1.42.1.2 |
wwpLeosTrafficProfileNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.2 |
wwpLeosTrafficProfileNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.2.0 |
wwpLeosTrafficProfileMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.3 |
wwpLeosTrafficProfileMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.3.1 |
wwpLeosTrafficProfileMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.27.3.2 |