WWP-LEOS-SYSTEM-CONFIG-MIB
The MIB module for the WWP System Config information.
Main OID:
wwpLeosSystemConfigMIB.1.3.6.1.4.1.6141.2.60.12
160
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
160 total| Object Name |
|---|
wwpLeosSystemConfigMIBThe MIB module for the WWP System Config information. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.12 |
wwpLeosSystemConfigMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1 |
wwpLeosSystemConfigAttr OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.1 |
wwpLeosSystemConfigDefaultGatewayDefault gateway IP address.rw IpAddress .1.3.6.1.4.1.6141.2.60.12.1.1.1 |
wwpLeosSystemConfigBootCmdFileName of the last successfully executed command file name executed by the device.rw FileName .1.3.6.1.4.1.6141.2.60.12.1.1.2 |
wwpLeosSystemConfigBootCfgFileThis mib object specifies the bootup config file for the system. Setting is object is similar to setting default load config file name. When device will reboot it will attempt to load the file specified by wwpLeosSystemConfigBootCfgFile.rw FileName .1.3.6.1.4.1.6141.2.60.12.1.1.3 |
wwpLeosSystemClockDateTimeThe current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, as per RFC1903.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.4 |
wwpLeosSystemConfigSavePermFileSetting this object will set the save file name to the value of wwpLeosSystemConfigSavePermFile. What it means is that whenever wwpLeosSystemConfigControl is set to value 'save' then if wwpLeosSystemConfigSaveFile is not set then device will use wwpLeosSystemConfigSavePermFile as the file name to store config.rw FileName .1.3.6.1.4.1.6141.2.60.12.1.1.5 |
wwpLeosSystemConfigLastFileNameResetSetting this object will reset the name of the last config filename that was successfully executed by the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.6 |
wwpLeosSystemServiceModeSetting this object will change the service mode of operation. It will cause device to reboot. If this object is set to 'none' then device will reject the request and will return error.rw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.1.7 |
wwpLeosSystemConfigBackupGatewayBackup gateway IP address.rw IpAddress .1.3.6.1.4.1.6141.2.60.12.1.1.8 |
wwpLeosSystemConfigCustomerCfgFileSetting this object will set the name of the default customer configuration file name, which is the file that will copied to the default configuration file during a reset-to-customer-default operation. Setting this object to an empty string will remove the file name from the system configuration.rw FileName .1.3.6.1.4.1.6141.2.60.12.1.1.9 |
wwpLeosSystemConfigDefaultGatewayTableThe (conceptual) table listing the default gateways SEQUENCE OF WwpLeosSystemConfigDefaultGatewayEntry .1.3.6.1.4.1.6141.2.60.12.1.1.10 |
wwpLeosSystemConfigDefaultGatewayEntryAn entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable. WwpLeosSystemConfigDefaultGatewayEntry .1.3.6.1.4.1.6141.2.60.12.1.1.10.1 |
wwpLeosSystemConfigDefaultGatewayIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1 |
wwpLeosSystemConfigDefaultGatewayInetAddrTypeThe Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2 |
wwpLeosSystemConfigDefaultGatewayInetAddressDefault gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigDefaultGateway is set ot 0.0.0.0.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3 |
wwpLeosSystemConfigDefaultGatewayInterfaceNameInterface Name of the gateway, local or remote.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4 |
wwpLeosSystemConfigDefaultGatewayMetricMetric of the gateway.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5 |
wwpLeosSystemConfigDefaultGatewayStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6 |
wwpLeosSystemConfigBackupGatewayTableThe (conceptual) table listing the default gateways SEQUENCE OF WwpLeosSystemConfigBackupGatewayEntry .1.3.6.1.4.1.6141.2.60.12.1.1.11 |
wwpLeosSystemConfigBackupGatewayEntryAn entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable. WwpLeosSystemConfigBackupGatewayEntry .1.3.6.1.4.1.6141.2.60.12.1.1.11.1 |
wwpLeosSystemConfigBackupGatewayIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1 |
wwpLeosSystemConfigBackupGatewayInetAddrTypeThe Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2 |
wwpLeosSystemConfigBackupGatewayInetAddressBackup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3 |
wwpLeosSystemConfigBackupGatewayInterfaceNameInterface Name of the gateway, local or remote.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4 |
wwpLeosSystemConfigBackupGatewayMetricMetric of the gateway.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5 |
wwpLeosSystemConfigBackupGatewayStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6 |
wwpLeosSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.2 |
wwpLeosSystemConfigSaveFileNamewwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not set then device will use the file name specified by wwpLeosSystemConfigSavePermFile. If wwpLeosSystemConfigSavePermFile is also not set then default config file name i.e startup-config will be used to save config. Once 'wwpLeosSystemConfigControl' has been successfully applied, read on wwpLeosSystemConfigSaveFileName will always return empty string else it will show what user has configured.rw FileName .1.3.6.1.4.1.6141.2.60.12.1.2.1 |
wwpLeosSystemConfigControlControls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: this will wipe out all of the current configuration including Password and VLAN information. If the system doesn't support any of these control configuration option, it should return error while trying to set this object to the specific option. A read on this object should return none(0).rw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.2.2 |
wwpLeosSystemConfigFilepathReturns the path for configuration related files.ro FileName .1.3.6.1.4.1.6141.2.60.12.1.2.3 |
wwpLeosSystemConfigFileTableThe (conceptual) table listing the configs SEQUENCE OF WwpLeosSystemConfigFileEntry .1.3.6.1.4.1.6141.2.60.12.1.2.4 |
wwpLeosSystemConfigFileEntryAn entry (conceptual row) in the wwpLeosSystemConfigFileTable. WwpLeosSystemConfigFileEntry .1.3.6.1.4.1.6141.2.60.12.1.2.4.1 |
wwpLeosSystemConfigFileIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1 |
wwpLeosSystemConfigFileNameThe name of the Config file.ro FileName .1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2 |
wwpLeosSystemConfigActivateFileSet this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' config. If the operation was successful, this object performs the CLI equivalent to these commands and will return the status Setting this object to 'resetToCfg' will kills the load module and reloads a new load module and applies the config file specified by wwpLeosSystemConfigFileName. Setting this object to none will do nothing.rw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3 |
wwpLeosSystemTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.3 |
wwpLeosTelnetMaxBaseUserSessionsThe max number of base user telnet sessions for the device.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.3.1 |
wwpLeosTelnetMaxSuperUserSessionsThe max number of super user telnet sessions for the device.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.3.2 |
wwpLeosTelnetMaxAdminUserSessionsThe max number of admin users telnet sessions for the device.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.3.3 |
wwpLeosSystemCpuLoadQuery OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.7 |
wwpLeosSystemCpuLoad1MinThe OID to display CPU load in last 1 min. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.1 |
wwpLeosSystemCpuLoad10MinThe OID to display CPU load in last 10 min. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.2 |
wwpLeosSystemCpuLoad15MinThe OID to display CPU load in last 15 min. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.3 |
wwpLeosSystemCpuLoad5MinThe OID to display CPU load in last 5 min. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.4 |
wwpLeosSystemCpuLoad1MinMinimumThe minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.5 |
wwpLeosSystemCpuLoad1MinMaximumThe maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.6 |
wwpLeosSystemCpuLoad1MinStateThe 1 minute CPU load average state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.7.7 |
wwpLeosSystemCpuLoad15MinMinimumThe minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.8 |
wwpLeosSystemCpuLoad15MinMaximumThe maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.9 |
wwpLeosSystemCpuLoad15MinStateThe 15 minutes CPU load average state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.7.10 |
wwpLeosSystemCpuLoad5MinMinimumThe minimum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.11 |
wwpLeosSystemCpuLoad5MinMaximumThe maximum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100).ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.7.12 |
wwpLeosSystemCpuLoad5MinStateThe 5 minutes CPU load average state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.7.13 |
wwpLeosSystemConfigNotif OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.8 |
wwpLeosSystemConfigNotifTableThe (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, GetNext or Set is allowed on this table. SEQUENCE OF WwpLeosSystemConfigNotifEntry .1.3.6.1.4.1.6141.2.60.12.1.8.1 |
wwpLeosSystemConfigNotifEntryAn entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed on this table. WwpLeosSystemConfigNotifEntry .1.3.6.1.4.1.6141.2.60.12.1.8.1.1 |
wwpLeosSystemConfigErrLineNumThe OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1 |
wwpLeosSystemConfigErrStrThe OID is wwpLeosSystemConfigErrStr trap to identify the line which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2 |
wwpLeosSystemConfigErrLinesTotalThe OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3 |
wwpLeosSystemMemoryUsageQuery OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.9 |
wwpLeosSystemMemoryUsageTableTable of Memory Usage for various Memory Pools. SEQUENCE OF WwpLeosSystemMemoryUsageEntry .1.3.6.1.4.1.6141.2.60.12.1.9.1 |
wwpLeosSystemMemoryUsageEntryAn entry for each Memory Pool. WwpLeosSystemMemoryUsageEntry .1.3.6.1.4.1.6141.2.60.12.1.9.1.1 |
wwpLeosSystemMemoryUsagePoolIndexThe Memory Pool type. Enumeration .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1 |
wwpLeosSystemMemoryUsageMemoryTotalTotal size of the Memory Pool in bytes.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2 |
wwpLeosSystemMemoryUsageMemoryLWMLowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.xro Unsigned32 .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3 |
wwpLeosSystemMemoryUsageMemoryFreeAmount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4 |
wwpLeosSystemMemoryUsageStatusDenotes if the free memory amount is normal or below limit.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5 |
wwpLeosSystemMemoryUsageMemoryUsedAmount of used memory in the Memory Pool in bytes..ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6 |
wwpLeosSystemMemoryUsageMemoryAvailableAmount of available memory in the Memory Pool in bytes.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7 |
wwpLeosSystemXFtp OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.10 |
wwpLeosSystemXFtpModeSelect between modes of file transfer. The default mode is tftp.rw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.10.1 |
wwpLeosSystemXFtpServerIP address or the host name of default server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.2 |
wwpLeosSystemXFtpUserNameName used to login with.rw DisplayString .1.3.6.1.4.1.6141.2.60.12.1.10.3 |
wwpLeosSystemXFtpPasswdPassword used to login with.rw DisplayString .1.3.6.1.4.1.6141.2.60.12.1.10.4 |
wwpLeosSystemXFtpNumOfRetriesNumber of times to retry a file transfer request if it fails.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.5 |
wwpLeosSystemXFtpRetryIntervalLength of time in seconds to wait before retrying a file transfer if it fails.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.6 |
wwpLeosSystemXFtpConnectionTimeoutLength of time in seconds to wait before connection times out.rw Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.7 |
wwpLeosSystemXFtpTFtpServerTableThe (conceptual) table listing the default TFTP server SEQUENCE OF WwpLeosSystemXFtpTFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.8 |
wwpLeosSystemXFtpTFtpServerEntryAn entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable. WwpLeosSystemXFtpTFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.8.1 |
wwpLeosSystemXFtpTFtpServerIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1 |
wwpLeosSystemXFtpTFtpServerHostNameHost name or IP address of the default TFTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2 |
wwpLeosSystemXFtpTFtpServerRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6 |
wwpLeosSystemXFtpFtpServerTableThe (conceptual) table listing the default FTP server SEQUENCE OF WwpLeosSystemXFtpFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.9 |
wwpLeosSystemXFtpFtpServerEntryAn entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable. WwpLeosSystemXFtpFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.9.1 |
wwpLeosSystemXFtpFtpServerIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1 |
wwpLeosSystemXFtpFtpServerHostNameHost name or IP address of the default FTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2 |
wwpLeosSystemXFtpFtpServerUserNameUser name / login ID to be used with the default FTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3 |
wwpLeosSystemXFtpFtpServerPasswordPassword to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4 |
wwpLeosSystemXFtpFtpServerSecretPassword secret to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5 |
wwpLeosSystemXFtpFtpServerRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6 |
wwpLeosSystemXFtpSFtpServerTableThe (conceptual) table listing the default SFTP server SEQUENCE OF WwpLeosSystemXFtpSFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.10 |
wwpLeosSystemXFtpSFtpServerEntryAn entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable. WwpLeosSystemXFtpSFtpServerEntry .1.3.6.1.4.1.6141.2.60.12.1.10.10.1 |
wwpLeosSystemXFtpSFtpServerIndexUnique identifier to the table. Integer32 .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1 |
wwpLeosSystemXFtpSFtpServerHostNameHost name or IP address of the default SFTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2 |
wwpLeosSystemXFtpSFtpServerUserNameUser name / login ID to be used with the default SFTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3 |
wwpLeosSystemXFtpSFtpServerPasswordPassword to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4 |
wwpLeosSystemXFtpSFtpServerSecretPassword secret to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5 |
wwpLeosSystemXFtpSFtpServerRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6 |
wwpLeosSystemCpuUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.11 |
wwpLeosSystemCpuUtilizationLast5SecondsAverage 5 second CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.1 |
wwpLeosSystemCpuUtilizationLast5SecondsMinimumMinimum 5 second CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.2 |
wwpLeosSystemCpuUtilizationLast5SecondsMaximumThe maximum 5 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.3 |
wwpLeosSystemCpuUtilizationLast5SecondsStateThe 5 seconds CPU usage state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.11.4 |
wwpLeosSystemCpuUtilizationLast10SecondsThe 10 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.5 |
wwpLeosSystemCpuUtilizationLast10SecondsMinimumMinimum 10 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.6 |
wwpLeosSystemCpuUtilizationLast10SecondsMaximumMaximum 10 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.7 |
wwpLeosSystemCpuUtilizationLast10SecondsStateThe 10 seconds CPU usage state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.11.8 |
wwpLeosSystemCpuUtilizationLast60SecondsThe 60 seconds CPU usage state.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.9 |
wwpLeosSystemCpuUtilizationLast60SecondsMinimumMinimum 60 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.10 |
wwpLeosSystemCpuUtilizationLast60SecondsMaximumMaximum 60 seconds CPU usage measurement.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.11.11 |
wwpLeosSystemCpuUtilizationLast60SecondsStateThe 60 seconds CPU state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.11.12 |
wwpLeosSystemFileSystemUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.12 |
wwpLeosSystemFileSystemUtilizationTmpfsCurrentCurrent percentage usage of the /tmp/ directory in the filesystem.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.1 |
wwpLeosSystemFileSystemUtilizationTmpfsMinimumMinimum percentage usage of the /tmp/ directory in the file system.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.2 |
wwpLeosSystemFileSystemUtilizationTmpfsMaximumMaximum percentage usage of the /tmp/ directory in the file system.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.3 |
wwpLeosSystemFileSystemUtilizationTmpfsStateCurrent state of the /tmp/ directory in the file system.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.12.4 |
wwpLeosSystemFileSystemUtilizationSysfsCurrentCurrent percentage usage of the /mnt/sysfs/ directory in the file system.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.5 |
wwpLeosSystemFileSystemUtilizationSysfsMinimumMinimum percentage usage of the /mnt/sysfs/ directory in the file system.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.6 |
wwpLeosSystemFileSystemUtilizationSysfsMaximumMaximum percentage usage of the /mnt/sysfs/ directory in the file system.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.12.7 |
wwpLeosSystemFileSystemUtilizationSysfsStateCurrent state of the /mnt/sysfs/ directory in the file system.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.12.8 |
wwpLeosSystemMemoryUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.13 |
wwpLeosSystemMemoryUtilizationUsedMemoryCurrentCurrent number of used memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.1 |
wwpLeosSystemMemoryUtilizationUsedMemoryMinimumMinimum number of used memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.2 |
wwpLeosSystemMemoryUtilizationUsedMemoryMaximumMaximum number of used memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.3 |
wwpLeosSystemMemoryUtilizationAvailableMemoryCurrentCurrent number of available memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.4 |
wwpLeosSystemMemoryUtilizationAvailableMemoryMinimumMinimum number of available memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.5 |
wwpLeosSystemMemoryUtilizationAvailableMemoryMaximumMaximum number of available memory in bytes.ro Gauge32 .1.3.6.1.4.1.6141.2.60.12.1.13.6 |
wwpLeosSystemMemoryUtilizationAvailableMemoryStateCurrent state of the available memory.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.13.7 |
wwpLeosSystemGuardian OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.14 |
wwpLeosSystemGuardianAdminEnableSets the admin state for the system guardian. A reboot is required for changes to take effectrw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.14.1 |
wwpLeosSystemGuardianOperEnableDisplays the current guardian operational state.ro Enumeration .1.3.6.1.4.1.6141.2.60.12.1.14.2 |
wwpLeosSystemGuardianLimitNumRebootslimits the number of consecutive guardian reboots to 3 if set to on.rw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.14.3 |
wwpLeosSystemGuardianConsecutiveRebootsThe current number of consecutive guardian rebootsro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.14.4 |
wwpLeosSystemGuardianTotalRebootsThe total number of guardian reboots.ro Integer32 .1.3.6.1.4.1.6141.2.60.12.1.14.5 |
wwpLeosSystemServers OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.1.15 |
wwpLeosSystemSftpServerAdminStateSets the admin state for the SFTP serverrw Enumeration .1.3.6.1.4.1.6141.2.60.12.1.15.1 |
wwpLeosSystemConfigMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.2 |
wwpLeosSystemConfigMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.2.0 |
wwpLeosImproperCmdInConfigFileA wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in the configuration file while processing the wwpLeosSystemConfigFileName NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.1 |
wwpLeosSystemServiceModeChangeA wwpLeosSystemServiceModeChange notification will be sent out whenever someone changes the system service mode between mpls and pbt. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.2 |
wwpLeosSystemMemoryStatusNotificationA wwpLeosSystemMemoryStatusNotification notification will be sent out whenever the system memory is below threshold limit. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.3 |
wwpLeosImproperCmdInConfigLineStringA wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the configuration file while processing the wwpLeosSystemConfigFileName. wwpLeosSystemConfigErrStr will specify the commands which failed with the line number. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.4 |
wwpLeosSystemCpuUtilization5SecondStatusTrapThe wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 5 second CPU utilization changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.5 |
wwpLeosSystemCpuUtilization10SecondStatusTrapThe wwpLeosSystemCpuUtilization10SecondStatusTrap is sent out when the 10 second CPU utilization changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.6 |
wwpLeosSystemCpuUtilization60SecondStatusTrapThe wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 60 second CPU utilization changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.7 |
wwpLeosSystemCpu1MinLoadStatusTrapThe wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over one minute changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.8 |
wwpLeosSystemCpu5MinLoadStatusTrapThe wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over five minutes changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.9 |
wwpLeosSystemCpu15MinLoadStatusTrapThe wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over fifteen minutes changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.10 |
wwpLeosSystemMemoryUtilizationStatusTrapThe wwpLeosSystemMemoryUtilizationStatusTrap is sent out when the memory utilization changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.11 |
wwpLeosSystemFileSystemUtilizationTmpStatusTrapThe wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent out when the usage of '/tmp/' changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.12 |
wwpLeosSystemFileSystemUtilizationSysfsStatusTrapThe wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent out when the usage of '/mnt/sysfs/' changes states. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.12.2.0.13 |
wwpLeosSystemConfigMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.3 |
wwpLeosSystemConfigCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.3.1 |
wwpLeosDefaultGatewayComplianceThe compliance statement of wwpLeosSystemConfigAttr. Unknown .1.3.6.1.4.1.6141.2.60.12.3.1.1 |
wwpLeosBackupGatewayComplianceThe compliance statement of wwpLeosSystemConfigAttr. Unknown .1.3.6.1.4.1.6141.2.60.12.3.1.2 |
wwpLeosSystemConfigMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.12.3.2 |
wwpLeosDefaultGatewayIPv6GroupSystem config default gateway objects for supporting IPv6. Unknown .1.3.6.1.4.1.6141.2.60.12.3.2.1 |
wwpLeosBackupGatewayIPv6GroupSystem config backup gateway objects for supporting IPv6. Unknown .1.3.6.1.4.1.6141.2.60.12.3.2.2 |