Home/Catalog/WWP-LEOS-PORT-XCVR-MIB

WWP-LEOS-PORT-XCVR-MIB

Corrected Units changed watts to uW in descriptions.
Main OID:
wwpLeosPortXcvrMIB.1.3.6.1.4.1.6141.2.60.4
127
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
WWP-SMI

Objects

127 total
Object Name
wwpLeosPortXcvrMIBCorrected Units changed watts to uW in descriptions.
MODULE-IDENTITY
.1.3.6.1.4.1.6141.2.60.4
wwpLeosPortXcvrMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.1
wwpLeosPortXcvr
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.1.1
wwpLeosPortXcvrTableThis table contains descriptions and settings for each of the physical transceiver devices.
SEQUENCE OF WwpLeosPortXcvrEntry
.1.3.6.1.4.1.6141.2.60.4.1.1.1
wwpLeosPortXcvrEntryThe Transciever Device Entry.
WwpLeosPortXcvrEntry
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1
wwpLeosPortXcvrIdThe ID for the transceiver.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1
wwpLeosPortXcvrOperStateThe operational state of the transceiver.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2
wwpLeosPortXcvrIdentiferTypeType for the transceiver.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3
wwpLeosPortXcvrExtIdentiferTypeExtended identifier type for this transceiver.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4
wwpLeosPortXcvrConnectorTypeType of connector. unknown(1), sc(2), fiberChannelStyle1(3), fiberChannelStyle2(4), bnc/tnc(5), coaxialHeader(6), fiberJack(7), lc(8), mt-rj(9), mu(10), sg(11), opticalPitTail(12), reserved(13..32), hssdc(33), copperPitTail(34), reserved(35..128), vendorSpecific(129..256).ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5
wwpLeosPortXcvrTypeType of Transceiver.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6
wwpLeosPortXcvrVendorNameString containing this transceiver's vendor name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7
wwpLeosPortXcvrVendorOUIString containing this transceiver's vendor OUI.ro
OCTET STRING
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8
wwpLeosPortXcvrVendorPNString containing this transceiver's vendor OUI.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9
wwpLeosPortXcvrRevNumString containing this transceiver's part revision number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10
wwpLeosPortXcvrSerialNumString containing this transceiver's part serial number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11
wwpLeosPortXcvrEncodingTypeIf wwpLeosPortXcvrIdentiferType is SFP, then the following values is defined for the encoding type: unspecified(1), 8B10B(2), 4b5b(3), NRZ(4), Manchester(5), SONET(6), reserved(7-256) If wwpLeosPortXcvrIdentiferType is XFP, then the following values is defined for the encoding type: Bit 7: 64B/66B (yes/no) Bit 6: 8B10B (yes/no) Bit 5: Sonet Scrambled (yes/no) Bit 4: NRZ (yes/no) Bit 3: RZ (yes/no) Bit 2: Tx Dither Support (yes/no) Bit 1: Reserved Bit 0: Reserved Multiple bits can be set at once in the case of XFP. For instance, to indicate support for NRZ(4) and Sonet scrambled (5), the user would see this object with the value of 16 + 32 = 48ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12
wwpLeosPortXcvrMfgDateThe transceiver's manufacture date in string.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13
wwpLeosPortXcvrComplianceVerThis represents the compliance version. Value 1 means digital diagnostic functionality not included or undefined Value 2 means includes functionality defined in Rev 9.0 SFF-8472 Value 3 means TBD Value 4 means TBD.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14
wwpLeosPortXcvrWaveLengthThis represents the wavelength of the transceiver. Units are nano meter.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15
wwpLeosPortXcvrTemperatureThis represents the temperature of the transceiver. Units are in degrees Cro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16
wwpLeosPortXcvrVccThis represents the voltage of the transceiver.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17
wwpLeosPortXcvrBiasThis represents the bias of the transceiver.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18
wwpLeosPortXcvrRxPowerThis represents the measured receive power of the transceiver. Units are micro Watts.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19
wwpLeosPortXcvrTxStateIndicates whether this transceiver is currently set to transmit.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20
wwpLeosPortXcvrTxFaultStatusIndicates the fault status of this transceiver.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21
wwpLeosPortXcvrRxRateStatusIndicates the Rx rate status of this transceiver.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22
wwpLeosPortXcvr9by125umIndicates the link length for 9/125um fiber.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23
wwpLeosPortXcvr50by125umIndicates the link length for 50/125um fiber.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24
wwpLeosPortXcvr62dot5by125umIndicates the link length for 62.5/125um fiber.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25
wwpLeosPortXcvrCuIndicates the link length for copper.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26
wwpLeosPortXcvrTxOutputPwIndicates the Tx Output power for the transceiver. Units are micro Watts.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27
wwpLeosPortXcvrLosStateIndicates the Loss Of Signal State for the optical transceiver. Ports without optical transceiver will always report 'false'.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28
wwpLeosPortXcvrDiagSupportedIndicates if diagnostics are supported on this transceiver.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29
wwpLeosPortXcvrEnhDiagAlarmSupportedIndicates if enhanced diagnostics alarms / warnings implemented.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30
wwpLeosPortXcvrEnhDiagSoftTxDisableSupportedIndicates if enhanced diagnostics soft Tx disable control is implemented.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31
wwpLeosPortXcvrEnhDiagSoftTxFaultSupportedIndicates if enhanced diagnostics soft Tx fault monitoring is implemented.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32
wwpLeosPortXcvrEnhDiagRxLosSupportedIndicates if enhanced diagnostics Rx LOS monitoring is implemented.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33
wwpLeosPortXcvrHighTempAlarmThresholdIndicates the higher threshold for temperature alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34
wwpLeosPortXcvrLowTempAlarmThresholdIndicates the lower threshold for temperature alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35
wwpLeosPortXcvrHighVccAlarmThresholdIndicates the higher threshold for voltage alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36
wwpLeosPortXcvrLowVccAlarmThresholdIndicates the lower threshold for voltage alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37
wwpLeosPortXcvrHighBiasAlarmThresholdIndicates the higher threshold for bias alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38
wwpLeosPortXcvrLowBiasAlarmThresholdIndicates the lower threshold for bias alarm.ro
Integer32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39
wwpLeosPortXcvrHighTxPwAlarmThresholdIndicates the higher threshold for Tx power alarm. Units are micro wattsro
Integer32 UNITS "uW"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40
wwpLeosPortXcvrLowTxPwAlarmThresholdIndicates the lower threshold for Tx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41
wwpLeosPortXcvrHighRxPwAlarmThresholdIndicates the higher threshold for Rx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42
wwpLeosPortXcvrLowRxPwAlarmThresholdIndicates the lower threshold for Rx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43
wwpLeosPortXcvrEnhDiagRateSelectSupportedIndicates if enhanced diagnostics soft rate select control is implemented.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44
wwpLeosPortXcvrAdminStateThe admin state of the transceiver.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45
wwpLeosPortXcvrXfpMinBitRateThis represents the minimum bit rate.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70
wwpLeosPortXcvrXfpMaxBitRateThis represents the maximum bit rate.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71
wwpLeosPortXcvrXfpLinkLenSmf1kmThis represents the length (SMF fiber) 1km.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72
wwpLeosPortXcvrXfpLinkLenE50u2mThis represents the length (ext. BW MMF) 2m.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73
wwpLeosPortXcvrXfpLinkLen50u1mThis represents the length (50um) 1m.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74
wwpLeosPortXcvrXfpLinkLen62dot5u1mThis represents the length (62.5um) 1m.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75
wwpLeosPortXcvrXfpLinkLenCopper1mThis represents the length (copper) 1m.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76
wwpLeosPortXcvrXfpDevTechThis represents the device technology.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77
wwpLeosPortXcvrXfpTransmitterTechThis represents the device transmitter technology: Bit 3: Wavelength Control (active/none) Bit 2: Transmitter Cooling (cooled/uncooled) Bit 1: Detector Type (apd/pin) Bit 0: Transmitter Tuning (Tunable/non-Tunable)ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78
wwpLeosPortXcvrXfpCdrSupportThis represents the CDR support: Bit 7: 9.95 Gb/s (yes/no) Bit 6: 10.3 Gb/s (yes/no) Bit 5: 10.5 Gb/s (yes/no) Bit 4: 10.7 Gb/s (yes/no) Bit 3: 11.1 Gb/s (yes/no) Bit 2: N/A Bit 1: Lineside Loopback (yes/no) Bit 0: XFI Loopback (yes/no)ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79
wwpLeosPortXcvrXfpWaveLengthTolThis represents the wavelength tolerance.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80
wwpLeosPortXcvrXfpMaxCaseTempThis represents the maximum case temperature.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81
wwpLeosPortXcvrXfpMaxPowerThis represents the maximum power dissipation.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82
wwpLeosPortXcvrXfpMax5vCurrentThis represents the 5.0 Volt Max Current.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83
wwpLeosPortXcvrXfpMax3p3vCurrentThis represents the 3.3 Volt Max Current.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84
wwpLeosPortXcvrXfpMax1p8vCurrentThis represents the 1.8 Volt Max Current.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85
wwpLeosPortXcvrXfpMaxNeg5p2vCurrentThis represents the -5.2 Volt Max Current.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86
wwpLeosPortXcvrXfpDiagMonitorTypeThis represents the diag monitor type: Bit 4 indicates BER support. Bit 3 indidates the Rx Power Meas. type of Avg or OMA.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87
wwpLeosPortXcvrXfpEnhancedOptionsThis represents the enhanced options: Bit 7: VPS Support (yes/no) Bit 6: Soft TX_DISABLE (yes/no) Bit 5: Soft P_down (yes/no) Bit 4: VPS LV Regulator Mode (yes/no) Bit 3: VPS bypassed Reg. Mode (yes/no) Bit 2: Active FEC Ctrl (yes/no) Bit 1: Wavelength or frequency Tunability (yes/no) Bit 0: CMU Support Mode (yes/no)ro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88
wwpLeosPortXcvrXfpAuxMonitoringInput1This represents the Aux monitoring of A/D input 1.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89
wwpLeosPortXcvrXfpAuxMonitoringInput2This represents the Aux monitoring of A/D input 2.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90
wwpLeosPortXcvrAdminFrequencyThe admin frequency of the transceiver in GHzrw
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91
wwpLeosPortXcvrXfpLaserFirstFrequencyThis represents the first frequency in GHzro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92
wwpLeosPortXcvrXfpLaserLastFrquencyThis represents the last frequency in GHzro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93
wwpLeosPortXcvrXfpMaxGridScacingThis represents the maximun support grid spacing in GHzro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94
wwpLeosPortXcvrXfpChannelNumThis represents the channel numberro
INTEGER
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95
wwpLeosPortXcvrXfpFrequencyErrorThis represents the frequency errorro
INTEGER (-32768..32767)
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96
wwpLeosPortXcvrAdminWavelengthThe admin wavelength of the transceiver in pico-meterrw
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97
wwpLeosPortXcvrAdminChannelThe admin channel number of the transceiverrw
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98
wwpLeosPortXcvrXfpLaserFirstWavelenthThis represents the first wavelength in pico meterro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99
wwpLeosPortXcvrXfpLaserLastWavelengthThis represents the last wavelength in pico meterro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100
wwpLeosPortXcvrXfpLaserFirstChannelThis represents the first channel numberro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101
wwpLeosPortXcvrXfpLaserLastChannelThis represents the last channel numberro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102
wwpLeosPortXcvrOperFrequencyThe operational frequency of the transceiver in GHzro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103
wwpLeosPortXcvrOperWavelengthThe operational wavelength of the transceiver in pico-meterro
Unsigned32
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104
wwpLeosPortXcvrRxDbmPowerIndicates the Rx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105
wwpLeosPortXcvrTxDbmPowerIndicates the Tx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106
wwpLeosPortXcvrHighTxDbmPwAlarmThresholdIndicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107
wwpLeosPortXcvrLowTxDbmPwAlarmThresholdIndicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108
wwpLeosPortXcvrHighRxDbmPwAlarmThresholdIndicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109
wwpLeosPortXcvrLowRxDbmPwAlarmThresholdIndicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.ro
Integer32 UNITS "dBm"
.1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110
wwpLeosPortXcvrNotif
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.1.2
wwpLeosPortXcvrEventTypeIndicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, gone down or has been selected.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.2.1
wwpLeosPortXcvrErrorTypeIndicates if the Xcvr specified by the wwpLeosPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if transceiver has been detected faulted otherwise it returns none.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.4.1.2.2
wwpLeosPortXcvrMIBNotificationPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.2
wwpLeosPortXcvrMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.2.0
wwpLeosPortXcvrLinkStateChangeNotificationA wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.4
wwpLeosPortXcvrErrorTypeNotificationA wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specified by wwpLeosPortXcvrErrorType.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.5
wwpLeosPortXcvrTempHighNotificationA wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.6
wwpLeosPortXcvrTempLowNotificationA wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.7
wwpLeosPortXcvrTempNormalNotificationA wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr temperature returns back to normal state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.8
wwpLeosPortXcvrVoltageHighNotificationA wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.9
wwpLeosPortXcvrVoltageLowNotificationA wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.10
wwpLeosPortXcvrVoltageNormalNotificationA wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr voltage returns back to normal state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.11
wwpLeosPortXcvrBiasHighNotificationA wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.12
wwpLeosPortXcvrBiasLowNotificationA wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.13
wwpLeosPortXcvrBiasNormalNotificationA wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr Bias returns back to normal state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.14
wwpLeosPortXcvrTxPowerHighNotificationA wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.15
wwpLeosPortXcvrTxPowerLowNotificationA wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.16
wwpLeosPortXcvrTxPowerNormalNotificationA wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr TxPower returns back to normal state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.17
wwpLeosPortXcvrRxPowerHighNotificationA wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.18
wwpLeosPortXcvrRxPowerLowNotificationA wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.19
wwpLeosPortXcvrRxPowerNormalNotificationA wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr RxPower returns back to normal state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.20
wwpLeosPortXcvrSpeedInfoMissingNotificationA wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr speed information is not found.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.21
wwpLeosPortXcvrBiasHighWarningNotificationA wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.22
wwpLeosPortXcvrBiasLowWarningNotificationA wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.23
wwpLeosPortXcvrTempHighWarningNotificationA wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.24
wwpLeosPortXcvrTempLowWarningNotificationA wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases below the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.25
wwpLeosPortXcvrVoltageHighWarningNotificationA wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.26
wwpLeosPortXcvrVoltageLowWarningNotificationA wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.27
wwpLeosPortXcvrTxPowerHighWarningNotificationA wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.28
wwpLeosPortXcvrTxPowerLowWarningNotificationA wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr TxPower decreases below the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.29
wwpLeosPortXcvrRxPowerHighWarningNotificationA wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.30
wwpLeosPortXcvrRxPowerLowWarningNotificationA wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr RxPower decreases below the warning threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.4.2.0.31
wwpLeosPortXcvrMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.3
wwpLeosPortXcvrMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.3.1
wwpLeosPortXcvrMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.4.3.2
WWP-LEOS-PORT-XCVR-MIB - SNMP MIB Reference | MIBs Explorer