WWP-LEOS-DNS-CLIENT-MIB
A MIB module to manage dns client on the WWP products.
Main OID:
wwpLeosDnsClientMIB.1.3.6.1.4.1.6141.2.60.16
29
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
wwpLeosDnsClientMIBA MIB module to manage dns client on the WWP products. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.16 |
wwpLeosDnsClientMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.1 |
wwpLeosDnsClient OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.1.1 |
wwpLeosDnsClientStatusSpecifies whether or not the DNS client resolver is enabled or disabled.rw Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.1 |
wwpLeosDnsClientDhcpDomainNameSpecifies the admin domain name configured by dhcp for this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.16.1.1.2 |
wwpLeosDnsClientDhcpDomainNameStateSpecifies if wwpLeosDnsClientDhcpDomainName is enabled or disabled.ro Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.3 |
wwpLeosDnsClientUserDomainNameSpecifies the admin domain name configured by user for this device.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.16.1.1.4 |
wwpLeosDnsClientUserDomainNameStateSpecifies if wwpLeosDnsClientUserDomainName is enabled or disabled.ro Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.5 |
wwpLeosDnsServerTableA table containing configured DNS Servers information. To create entry in this table use SNMP multiple set operation. Following mib objects must be set to create valid entry wwpLeosDnsServerAddr, wwpLeosDnsServerStatus SEQUENCE OF WwpLeosDnsServerEntry .1.3.6.1.4.1.6141.2.60.16.1.1.6 |
wwpLeosDnsServerEntryDefines the information pertaining to a configured DNS Server. WwpLeosDnsServerEntry .1.3.6.1.4.1.6141.2.60.16.1.1.6.1 |
wwpLeosDnsServerIndexThe unique index in DNS server table. Integer32 .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.1 |
wwpLeosDnsServerAddrThe IP address for the configured DNS Server. wwpLeosDnsServerInetAddr cannot be set at the same time. This OID will be set to 0.0.0.0 when the server has an IPv6 address, which is shown in the wwpLeosDnsServerInetAddr and the wwpLeosDnsServerInetAddrType is set to ipv6. For a server with an IPv4 address, the ip address will be shown in this OID and the wwpLeosDnsServerInetAddr with the wwpLeosDnsServerInetAddrType set to ipv4.rw IpAddress .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.2 |
wwpLeosDnsServerUserPriorityThe priority of the dns server configured by user.rw Integer32 .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.3 |
wwpLeosDnsServerDhcpPriorityThe priority of the dns server configured by DHCP.ro Integer32 .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.4 |
wwpLeosDnsServerScopeThe object specifies the scope of this entry. Scope of the entry means who configured this entry. dhcp or user or bothro Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.5 |
wwpLeosDnsServerStatusThis object is used to create and delete rows in the wwpLeosDnsServerTable. To create a new row the management station must set the object to 'CreateAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.6 |
wwpLeosDnsServerInetAddrTypeThe Inet address type for the configured DNS Server. Used in conjunction with wwpLeosDnsServerInetAddr. When set to: ipv4 : wwpLeosDnsServerInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosDnsServerInetAddr should be compliant with InetAddressIPv6 from RFC 4001rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.7 |
wwpLeosDnsServerInetAddrThe Inet address for the configured DNS Server. This OID must be used in conjunction with wwpLeosDnsServerInetAddrType. The InetAddress specified here will be compliant with RFC 4001.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6141.2.60.16.1.1.6.1.8 |
wwpLeosDnsServerExtTableThis table is an extension for wwpLeosDnsServerTable table. This table allows to set more attributes for DNS wwpLeosDnsServerTable table SEQUENCE OF WwpLeosDnsServerExtEntry .1.3.6.1.4.1.6141.2.60.16.1.1.7 |
wwpLeosDnsServerExtEntryDefines the information pertaining to a configured DNS Server. WwpLeosDnsServerExtEntry .1.3.6.1.4.1.6141.2.60.16.1.1.7.1 |
wwpLeosDnsServerAdminStateThe object specifies the user admin state of this entry. User can configure this to enable | disable.rw Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.7.1.1 |
wwpLeosDnsServerOperStateThe object specifies the operational state of this entry.ro Enumeration .1.3.6.1.4.1.6141.2.60.16.1.1.7.1.2 |
wwpLeosDnsClientMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.2 |
wwpLeosDnsClientMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.2.0 |
wwpLeosDnsClientMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.3 |
wwpLeosDnsClientMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.3.1 |
wwpLeosDnsServerEntryComplianceThe compliance statement of the wwpLeosDnsClient MIB. Unknown .1.3.6.1.4.1.6141.2.60.16.3.1.1 |
wwpLeosDnsClientMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.16.3.2 |
wwpLeosDnsServerEntryIpv6GroupDNS server entry objects for IPv6 address. Unknown .1.3.6.1.4.1.6141.2.60.16.3.2.1 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →WWP-ESM-MIB
SNMP MIB module
454 objects→
WWP-LEOS-CFM-MIB
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
443 objects→
WWP-LEOS-VPLS-MIB
SNMP MIB module
308 objects→
WWP-LEOS-FLOW-MIB
SNMP MIB module
307 objects→
WWP-LEOS-PORT-STATS-MIB
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
253 objects→
WWP-LEOS-CHASSIS-MIB
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.
233 objects→