WWP-L2-CF-TUNNEL-MIB
This MIB module is for the Layer 2 Control Frame Tunneling in WWP Portal Products
Main OID:
wwpL2CFTunnelMIB.1.3.6.1.4.1.6141.2.53
40
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
wwpL2CFTunnelMIBThis MIB module is for the Layer 2 Control Frame Tunneling in WWP Portal Products MODULE-IDENTITY .1.3.6.1.4.1.6141.2.53 |
wwpL2CFTunnelMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.1 |
wwpL2CFTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.1.1 |
wwpL2CFTunnelTableVLAN table SEQUENCE OF WwpL2CFTunnelEntry .1.3.6.1.4.1.6141.2.53.1.1.1 |
wwpL2CFTunnelEntrytable of vlans WwpL2CFTunnelEntry .1.3.6.1.4.1.6141.2.53.1.1.1.1 |
wwpL2CFTunnelVlanId802.1Q VLAN ID (1-4094)ro VlanId .1.3.6.1.4.1.6141.2.53.1.1.1.1.1 |
wwpL2CFTunnelOperStatusThe current operational state of tunnel.ro Enumeration .1.3.6.1.4.1.6141.2.53.1.1.1.1.2 |
wwpL2CFTunnelAdminStatusThe administratively desired status of Layer 2 control frame handling.rw Enumeration .1.3.6.1.4.1.6141.2.53.1.1.1.1.3 |
wwpL2CFTunnelPriorityThe 802.1p packet priority to be assigned to packets associated with this port that do not have an 802.1Q VLAN header.rw Enumeration .1.3.6.1.4.1.6141.2.53.1.1.1.1.4 |
wwpL2CFTunnelRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. The default state for wwpL2CFTunnelAdminStatus will be 'disabled'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.53.1.1.1.1.5 |
wwpL2CFTProtocolTableThe (conceptual) table listing the l2 control frame protocol status tunnels. SEQUENCE OF WwpL2CFTProtocolEntry .1.3.6.1.4.1.6141.2.53.1.1.2 |
wwpL2CFTProtocolEntryThe layer 2 control frame protocol tunnel entry. WwpL2CFTProtocolEntry .1.3.6.1.4.1.6141.2.53.1.1.2.1 |
wwpL2CFTVlanId802.1Q VLAN ID (1-4094)ro VlanId .1.3.6.1.4.1.6141.2.53.1.1.2.1.1 |
wwpL2CFTProtocolNumThis object represent the list of protocols the device can support.ro Enumeration .1.3.6.1.4.1.6141.2.53.1.1.2.1.2 |
wwpL2CFTDispositionTypeSetting this object to 'discard' will cause wwpL2CFTProtocolNum frames arriving at the specified port to be discarded. NOTE: Setting this to 'peer' will cause the wwpL2CFTProtocolNum frame to be processed in the same manor as 'discard'. Setting this to 'tunnel' will cause the wwpL2CFTProtocolNum frame to be tunneled. The default disposition state of each protocol is controlled by portal application.rw Enumeration .1.3.6.1.4.1.6141.2.53.1.1.2.1.3 |
wwpL2CFTStatsTableA table that contains the frame counters for Layer 2 control frame handling. SEQUENCE OF WwpL2CFTStatsEntry .1.3.6.1.4.1.6141.2.53.1.1.3 |
wwpL2CFTStatsEntryA list of Link Aggregation Control Protocol statistics for each port on this device. WwpL2CFTStatsEntry .1.3.6.1.4.1.6141.2.53.1.1.3.1 |
wwpL2CFTStatsVlanId802.1Q VLAN ID (1-4094)ro VlanId .1.3.6.1.4.1.6141.2.53.1.1.3.1.1 |
wwpL2CFTStatsProtocolNumThis object represent the list of protocols the device can support.ro Enumeration .1.3.6.1.4.1.6141.2.53.1.1.3.1.2 |
wwpL2CFTStatsPacketsRxThe number of number of pkts ingressed matching protocol. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.3 |
wwpL2CFTStatsTunneledFramesThe number of number of pts that made tunneled. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.4 |
wwpL2CFTStatsDecodedFramesThe number of came in tunneled, then restored. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.5 |
wwpL2CFTStatsDecodedFailedThe number of failed to untunnel. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.6 |
wwpL2CFTStatsPeeredFramesThe number of number of peered packets. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.7 |
wwpL2CFTStatsDiscardFramesThe number of number of discarded packets. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.8 |
wwpL2CFTStatsTunFrameSubPortThe number of number of tunneled frames received on subscriber port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.3.1.9 |
wwpL2CFTGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.1.1.4 |
wwpL2CFTGlobalStatsPacketsRxThe total number of number of frames ingressed matching protocol. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.1 |
wwpL2CFTGlobalStatsTunneledFramesThe total number of number of frames that made tunneled. This total value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.2 |
wwpL2CFTGlobalStatsDecodedFramesThe total number of frames that came in tunneled, then restored. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.3 |
wwpL2CFTGlobalStatsDecodedFailedSpecifies the total number of frames that failed to 'untunnel' on the vlan. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.4 |
wwpL2CFTGlobalStatsPeeredFramesThe total number of number of peered frames. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.5 |
wwpL2CFTGlobalStatsDiscardFramesThe total number of number of discarded frames. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.6 |
wwpL2CFTGlobalStatsTunFrameSubPortThe total number of number of tunneled frames received on subscriber port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6141.2.53.1.1.4.7 |
wwpL2CFTResetStatCountersTo reset L2 control frame statistic counters , this object should be set to 'reset'. A read on this object should return none(0).rw Enumeration .1.3.6.1.4.1.6141.2.53.1.1.5 |
wwpL2CFTunnelMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.2 |
wwpL2CFTunnelMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.2.0 |
wwpL2CFTunnelMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.3 |
wwpL2CFTunnelMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.3.1 |
wwpL2CFTunnelMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.53.3.2 |