WWP-IP-INTERFACE-MIB
The WWP-IP-INTERFACE-MIB module manages vendor-specific IP interface configuration parameters on WWP devices, extending standard IP stack management with proprietary settings for interface state, addressing, and operational attributes.
Imported Objects
Objects
22 total| Object Name |
|---|
wwpIpInterfaceMIBThe MIB module for the WWP IpInterface Ip interfaces config. This MIB provide additional configuration to whatever is provided by the standard ip group. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.17 |
wwpIpInterfaceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.1 |
wwpIpInterface OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.1.1 |
wwpIpInterfaceTableTable of IP addresses and associated subnet mask. SEQUENCE OF WwpIpInterfaceEntry .1.3.6.1.4.1.6141.2.17.1.1.1 |
wwpIpInterfaceEntryInterface IP and subnet mask entry. These interfaces are used to cause the switch CPU to become involved witht he IP traffic. By default, a minimum of two interfaces must always exist, one for the local mgt interface, one for the remote mgt interface, and one or more for voice over IP. WwpIpInterfaceEntry .1.3.6.1.4.1.6141.2.17.1.1.1.1 |
wwpIpInterfaceIndexUnique index into the table.ro Integer32 .1.3.6.1.4.1.6141.2.17.1.1.1.1.1 |
wwpIpInterfaceNameThe friendly name for the IP interface.ro DisplayString .1.3.6.1.4.1.6141.2.17.1.1.1.1.2 |
wwpIpInterfaceIpAddrIP address associated with this interface.rw IpAddress .1.3.6.1.4.1.6141.2.17.1.1.1.1.3 |
wwpIpInterfaceSubnetThe subnet mask associated with this ip address/interface.rw IpAddress .1.3.6.1.4.1.6141.2.17.1.1.1.1.4 |
wwpIpInterfaceIfIndexXrefCross reference to MIB-2 Interfaces ifIndex.ro INTEGER .1.3.6.1.4.1.6141.2.17.1.1.1.1.5 |
wwpIpExtInterfaceTableA table that contains Interface Specific information maintained by each interface. SEQUENCE OF WwpIpExtInterfaceEntry .1.3.6.1.4.1.6141.2.17.1.1.2 |
wwpIpExtInterfaceEntryA list of interfaces additional config parameters maintained by each interface. WwpIpExtInterfaceEntry .1.3.6.1.4.1.6141.2.17.1.1.2.1 |
wwpIpInterfaceEnableThe status of each interface. A value of true(1) indicates that this interface is enabled and a value of false(2) indicates that this interface is disabled. The device shouldn't allow the Management Station to disable all the interfaces available on the box.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.17.1.1.2.1.1 |
wwpIpInterfaceVlanIdThe vlanId associated with this IP interface. The vlan indicated by wwpIpInterfaceVlanId should exist in the Vlan Table. If an interface has no vlan assocaited, then any read on this object should return 'noSuchInstance'.rw VlanId .1.3.6.1.4.1.6141.2.17.1.1.2.1.2 |
wwpIpInterfaceMgmtPktPriorityThe 802.1p Priority value for the mgmt traffic on this interface.rw INTEGER .1.3.6.1.4.1.6141.2.17.1.1.2.1.3 |
wwpIpInterfaceAddrNotifEnabledThis variable indicates whether the system generates the wwpIpInterfaceAddrChgNotification. A false value prevents this notifications from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.17.1.1.3 |
wwpIpInterfaceMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.2 |
wwpIpInterfaceMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.2.0 |
wwpIpInterfaceAddrChgNotificationA wwpIpInterfaceAddrChgNotification is sent whenever the ip address of an interface changes. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.17.2.0.1 |
wwpIpInterfaceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.3 |
wwpIpInterfaceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.3.1 |
wwpIpInterfaceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.17.3.2 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →SNMP MIB module
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
SNMP MIB module
SNMP MIB module
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.