WWP-EGRESS-PORT-RESTRICTION-MIB
Imported Objects
Objects
14 total| Object Name |
|---|
wwpEgressPortRestrictionMIBThe MIB module for the WWP EGRESS-PORT-RESTRICTION cobjects. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.34 |
wwpEgressPortRestrictionMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.1 |
wwpEgressPortRestriction OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.1.1 |
wwpEgressPortRestrictionTableA Table of EgressPortRestriction Entries. SEQUENCE OF WwpEgressPortRestrictionEntry .1.3.6.1.4.1.6141.2.34.1.1.1 |
wwpEgressPortRestrictionEntryThe EgressPortRestriction per vlan per source port Entry in the Table. WwpEgressPortRestrictionEntry .1.3.6.1.4.1.6141.2.34.1.1.1.1 |
wwpERestVlanIdVlan ID for this instance of EgressPortRestrictionEntry. This Vlan Id should refer to the wwpVlanId in the WwpVlanEntry.ro VlanId .1.3.6.1.4.1.6141.2.34.1.1.1.1.1 |
wwpERestPortIdThe source port Id for this instance of EgressPortRestrictionEntry. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.34.1.1.1.1.2 |
wwpERestEgreesPortsThe allowed egress ports on which Egress Port Restriction (EPR) allows for the configuration, on a per-port/per-Vlan basis.rw PortList .1.3.6.1.4.1.6141.2.34.1.1.1.1.3 |
wwpERestStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.34.1.1.1.1.4 |
wwpEgressPortRestrictionNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.2 |
wwpEgressPortRestrictionNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.2.0 |
wwpEgressPortRestrictionMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.3 |
wwpEgressPortRestrictionMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.3.1 |
wwpEgressPortRestrictionMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.34.3.2 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →SNMP MIB module
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
SNMP MIB module
SNMP MIB module
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.