WWP-COMMUNITY-MIB
Imported Objects
Objects
20 total| Object Name |
|---|
wwpCommunityMIBThe MIB module for the WWP Community specific information. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.32 |
wwpCommunityMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.1 |
wwpCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.1.1 |
wwpCommunityTableTable of read/write Community entries. SEQUENCE OF WwpCommunityEntry .1.3.6.1.4.1.6141.2.32.1.1.1 |
wwpCommunityEntryAn entry for each read/write community. WwpCommunityEntry .1.3.6.1.4.1.6141.2.32.1.1.1.1 |
wwpCommunityNameThe Name of Community String.ro OCTET STRING .1.3.6.1.4.1.6141.2.32.1.1.1.1.1 |
wwpCommunityIpAddressThe IP Address of the host(s) with access rights. A value of 0 means that access is allowed to any host.ro IpAddress .1.3.6.1.4.1.6141.2.32.1.1.1.1.2 |
wwpCommunityRightsRights associated with the Community Strings. The community Name associated with 'readOnly' community Rights will not have any access (read\write) to the readWrite communities.rw Enumeration .1.3.6.1.4.1.6141.2.32.1.1.1.1.3 |
wwpCommunityStatusTo create a row in this table, a manager must set this object to 'createAndGo'. wwpCommunityRights must be valid prior to setting this object to 'active'. The Agent should not let all the comunities to be deleted as this will cause isolation of the device. At least one readOnly community and one readWrite community should always be present.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.32.1.1.1.1.4 |
wwpNotifCommunityTableTable of Notification Community entries. SEQUENCE OF WwpNotifCommunityEntry .1.3.6.1.4.1.6141.2.32.1.1.2 |
wwpNotifCommunityEntryAn entry for each notification community. WwpNotifCommunityEntry .1.3.6.1.4.1.6141.2.32.1.1.2.1 |
wwpNotifCommunityNameThe Community String to be used for the notifications.ro OCTET STRING .1.3.6.1.4.1.6141.2.32.1.1.2.1.1 |
wwpNotifCommunityDestAddrThe IP Address of the host to which notification is to be sent.ro IpAddress .1.3.6.1.4.1.6141.2.32.1.1.2.1.2 |
wwpNotifCommunityStatusTo create a row in this table, a manager must set this object to 'createAndGo'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.32.1.1.2.1.3 |
wwpCommunityPersistTo persist the SNMP communities, this object should be set to 'persist'. A read on this object should return none(0).rw Enumeration .1.3.6.1.4.1.6141.2.32.1.1.3 |
wwpCommunityMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.2 |
wwpCommunityMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.2.0 |
wwpCommunityMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.3 |
wwpCommunityMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.3.1 |
wwpCommunityMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.32.3.2 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →SNMP MIB module
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
SNMP MIB module
SNMP MIB module
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.