WWP-8021X-MIB
Description.
Main OID:
wwp8021xMibModule.1.3.6.1.4.1.6141.2.401
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
wwp8021xMibModuleDescription. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.401 |
wwp8021xMIB OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1 |
wwp8021xConf OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.1 |
wwp8021xGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.1.1 |
wwp8021xCompls OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.1.2 |
wwp8021xObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.2 |
wwp8021xPortTableTable with an entry for every port on the switch SEQUENCE OF Wwp8021xPortEntry .1.3.6.1.4.1.6141.2.401.1.2.1 |
wwp8021xPortEntryDescription. Wwp8021xPortEntry .1.3.6.1.4.1.6141.2.401.1.2.1.1 |
wwp8021xPortSwitch Ethernet Portro INTEGER .1.3.6.1.4.1.6141.2.401.1.2.1.1.1 |
wwp8021xRole802.1x role of the Port.rw Enumeration .1.3.6.1.4.1.6141.2.401.1.2.1.1.2 |
wwp8021xRadiusClient OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.2.2 |
wwp8021xRadiusClientTimeoutThis is the time in seconds between retransmissions to the RADIUS server.rw Integer32 .1.3.6.1.4.1.6141.2.401.1.2.2.1 |
wwp8021xRadiusClientRetriesIndicates the number of times the RADIUS server should be tried before giving up on the server.rw Integer32 .1.3.6.1.4.1.6141.2.401.1.2.2.2 |
wwp8021xRadiusDeadTimeLength of time in minutes during which a RADIUS server is skipped over by transaction requests..rw Integer32 .1.3.6.1.4.1.6141.2.401.1.2.2.3 |
wwp8021xRadiusServerTableLists the possible RADIUS servers. SEQUENCE OF Wwp8021xRadiusServerEntry .1.3.6.1.4.1.6141.2.401.1.2.2.4 |
wwp8021xRadiusServerEntryRadius server entry. Wwp8021xRadiusServerEntry .1.3.6.1.4.1.6141.2.401.1.2.2.4.1 |
wwp8021xRadiusServerIdIndex to the Radius Server Entry. The radius Servers are polled according to their ServerIds. If the ServerId 1 doesn't respond, then it tries for the next and hence on.ro Integer32 .1.3.6.1.4.1.6141.2.401.1.2.2.4.1.1 |
wwp8021xRadiusServerIpAddrIP Address of the RADIUS server.rw IpAddress .1.3.6.1.4.1.6141.2.401.1.2.2.4.1.2 |
wwp8021xRadiusServerAuthPortThe destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.6141.2.401.1.2.2.4.1.3 |
wwp8021xRadiusServerAuthKeyThe Auth Key to be used for Radius Servers. Retrieving the value of this object via SNMP will return an empty string for security reasonsrw OCTET STRING .1.3.6.1.4.1.6141.2.401.1.2.2.4.1.4 |
wwp8021xRadiusServerStatusTo create a row in this table, a manager must set this object to either createAndGo(4). A row in the WwpRadiusServerEntry can't be set to active until wwpRadiusServerIpAddr has been set to valid value. To disable a Radius server , the operator can set this object to 'notInSerVice' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.401.1.2.2.4.1.5 |
wwp8021xSupplicantSecTableTable for Supplicant username and password. Has entry for every port on the switch SEQUENCE OF Wwp8021xSupplicantSecEntry .1.3.6.1.4.1.6141.2.401.1.2.3 |
wwp8021xSupplicantSecEntryThis contains the username and password entries for each port. Index is wwp8021xPort from Wwp8021xPortEntry Wwp8021xSupplicantSecEntry .1.3.6.1.4.1.6141.2.401.1.2.3.1 |
wwp8021xSupplicantSecUserNameUser name associated with port. This is only applicable if port has role of Supplicant or Bothrw OCTET STRING .1.3.6.1.4.1.6141.2.401.1.2.3.1.1 |
wwp8021xSupplicantSecPasswordPassword associated with port. This is only applicable if port has role of Supplicant or Bothrw OCTET STRING .1.3.6.1.4.1.6141.2.401.1.2.3.1.2 |
wwp8021xEvents OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.3 |
wwp8021xEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.401.1.3.0 |