WAN
The WAN MIB module facilitates the monitoring and management of Wide Area Network interfaces and connectivity states, specifically tracking metrics such as interface status, throughput counters, error rates, and protocol-specific session statistics. This module enables administrators to assess link health, diagnose connectivity failures, and analyze bandwidth utilization across routed WAN segments.
Imported Objects
Objects
36 total| Object Name |
|---|
pepwave OBJECT IDENTIFIER .1.3.6.1.4.1.27662 |
wan_statusMIB module for WAN. MODULE-IDENTITY .1.3.6.1.4.1.27662.2 |
wanStatus OBJECT IDENTIFIER .1.3.6.1.4.1.27662.2.1 |
wanNumNumber of WAN network.ro INTEGER .1.3.6.1.4.1.27662.2.1.1 |
wanTableWAN Table SEQUENCE OF WanEntry .1.3.6.1.4.1.27662.2.1.2 |
wanEntryAn entry in the wanTable WanEntry .1.3.6.1.4.1.27662.2.1.2.1 |
wanIdWAN ID.ro INTEGER .1.3.6.1.4.1.27662.2.1.2.1.1 |
wanNameWAN Name.ro OCTET STRING .1.3.6.1.4.1.27662.2.1.2.1.2 |
wanStateWAN status.ro Enumeration .1.3.6.1.4.1.27662.2.1.2.1.3 |
wanHealthCheckStateWAN health check state.ro Enumeration .1.3.6.1.4.1.27662.2.1.2.1.4 |
wanSignalWAN signal strength in dBm unit. Remark: If the value equals -9999, means signal strength not applicable in this WAN.ro INTEGER .1.3.6.1.4.1.27662.2.1.2.1.5 |
wanCellIDWAN cell id. Remark: Only applicable for cellular WAN.ro OCTET STRING .1.3.6.1.4.1.27662.2.1.2.1.6 |
wanPdpConnectionWAN PDP connection type. Remark: Only applicable for cellular WAN.ro Enumeration .1.3.6.1.4.1.27662.2.1.2.1.7 |
wanNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.27662.2.1.3 |
wanNetworkIpTableWAN Network IP Table SEQUENCE OF WanNetworkIpEntry .1.3.6.1.4.1.27662.2.1.3.1 |
wanNetworkIpEntryAn entry in the wanNetworkIpTable WanNetworkIpEntry .1.3.6.1.4.1.27662.2.1.3.1.1 |
wanNetworkIpIdWAN network IP id.ro INTEGER .1.3.6.1.4.1.27662.2.1.3.1.1.1 |
wanNetworkIpTypeWAN network IP type.ro Enumeration .1.3.6.1.4.1.27662.2.1.3.1.1.2 |
wanNetworkIpAddressWAN network IP address.ro IpAddress .1.3.6.1.4.1.27662.2.1.3.1.1.3 |
wanNetworkSubnetMaskWAN network subnet mask.ro IpAddress .1.3.6.1.4.1.27662.2.1.3.1.1.4 |
wanNetworkDnsTableWAN Network DNS Table SEQUENCE OF WanNetworkDnsEntry .1.3.6.1.4.1.27662.2.1.3.2 |
wanNetworkDnsEntryAn entry in the wanNetworkDnsTable WanNetworkDnsEntry .1.3.6.1.4.1.27662.2.1.3.2.1 |
wanNetworkDnsIdWAN network DNS id.ro INTEGER .1.3.6.1.4.1.27662.2.1.3.2.1.1 |
wanNetworkDnsServerWAN network DNS server.ro IpAddress .1.3.6.1.4.1.27662.2.1.3.2.1.2 |
wanNetworkTableWAN Network Table SEQUENCE OF WanNetworkEntry .1.3.6.1.4.1.27662.2.1.3.3 |
wanNetworkEntryAn entry in the wanNetworkTable WanNetworkEntry .1.3.6.1.4.1.27662.2.1.3.3.1 |
wanNetworkGatewayWAN network subnet mask.ro IpAddress .1.3.6.1.4.1.27662.2.1.3.3.1.1 |
wanDataUsageTableWAN Network Data Usage Table SEQUENCE OF WanDataUsageEntry .1.3.6.1.4.1.27662.2.1.4 |
wanDataUsageEntryAn entry in the wanDataUsageTable WanDataUsageEntry .1.3.6.1.4.1.27662.2.1.4.1 |
dataTypeIDWAN network data usage type id.ro Enumeration .1.3.6.1.4.1.27662.2.1.4.1.1 |
wanDataUsageTxByteWAN network transmitted bytes(units: MB).ro Counter64 UNITS "MB" .1.3.6.1.4.1.27662.2.1.4.1.2 |
wanDataUsageRxByteWAN network received bytes(units: MB).ro Counter64 UNITS "MB" .1.3.6.1.4.1.27662.2.1.4.1.3 |
portWanSpeedTableWAN port speed table. SEQUENCE OF PortWanSpeedEntry .1.3.6.1.4.1.27662.2.1.5 |
portWanSpeedEntryAn entry in the portWanSpeedTable PortWanSpeedEntry .1.3.6.1.4.1.27662.2.1.5.1 |
portWanSpeedIndexWAN port speed index.ro INTEGER .1.3.6.1.4.1.27662.2.1.5.1.1 |
portWanSpeedWAN port speed status (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.ro PortSpeedType .1.3.6.1.4.1.27662.2.1.5.1.2 |
More MIBs from PEPWAVE
Browse all PEPWAVEMIBs →The WLC MIB module enables SNMP-based monitoring and management of Cisco Wireless LAN Controllers, providing access to critical metrics such as access point status, client association counts, radio interface statistics, and controller resource utilization.
The AP-SYSTEM-NETWORK MIB enables monitoring and management of network interface configurations, IP addressing, and routing parameters for Pepwave Enterprise WiFi Access Points. It provides specific visibility into interface status, operational states, and network connectivity metrics essential for maintaining wireless infrastructure integrity.
The PEPWAVE-MAX-MIB enables SNMP-based monitoring and management of Pepwave MAX series multi-WAN routers and cellular gateways, exposing critical operational metrics such as interface status, WAN link utilization, cellular signal strength (RSRP/SINR), session counts, and device health statistics including CPU and memory usage.
The AP-MANAGEMENT MIB enables SNMP-based monitoring and configuration of Peplink PepWave Enterprise WiFi Access Points, specifically exposing general device status, operational parameters, and interface statistics for the access point hardware.
The AP-SYSTEM-BASIC MIB module provides SNMP access to fundamental operational parameters and system status indicators for Peplink (PEPWAVE) Enterprise WiFi Access Points. It enables the monitoring of core device health metrics, including system uptime, CPU utilization, memory usage, and basic interface statistics required for infrastructure management.
SNMP MIB module