PEPWAVE-MAX-MIB
The PEPWAVE-MAX-MIB enables SNMP-based monitoring and management of Pepwave MAX series multi-WAN routers and cellular gateways, exposing critical operational metrics such as interface status, WAN link utilization, cellular signal strength (RSRP/SINR), session counts, and device health statistics including CPU and memory usage.
Imported Objects
Objects
50 total| Object Name |
|---|
pepwaveMAXMIB module for Pepwave MAX. MODULE-IDENTITY .1.3.6.1.4.1.27662.1 |
maxStatus OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.1 |
maxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.1.1 |
maxFirmwareMAX firmware version.ro NameString .1.3.6.1.4.1.27662.1.1.1.1 |
maxSerialNumberMAX serial number.ro NameString .1.3.6.1.4.1.27662.1.1.1.2 |
maxTimeMAX system time.ro NameString .1.3.6.1.4.1.27662.1.1.1.3 |
maxUpTimeMAX up time (in hundredths of a second) since the system was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.27662.1.1.1.4 |
maxLan OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.1.1.6 |
maxLanStatusMAX LAN status (up/down).ro NameString .1.3.6.1.4.1.27662.1.1.1.6.1 |
maxLanIpMAX LAN IP address.ro IpAddress .1.3.6.1.4.1.27662.1.1.1.6.2 |
maxLanSubnetMaskMAX LAN sub-net mask.ro IpAddress .1.3.6.1.4.1.27662.1.1.1.6.3 |
maxLinkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.1.2 |
maxLinkNumberThe number of network interfaces (regardless of their current state) present on this system.ro Counter32 .1.3.6.1.4.1.27662.1.1.2.1 |
linkTableA list of link status. SEQUENCE OF LinkStatusEntry .1.3.6.1.4.1.27662.1.1.2.2 |
linkEntryAn entry containing management information applicable to a particular interface. LinkStatusEntry .1.3.6.1.4.1.27662.1.1.2.2.1 |
linkConnNumVirtual WAN index number (1-based, unique). ConnectionNum .1.3.6.1.4.1.27662.1.1.2.2.1.1 |
linkNameMAX link status (connecting/connected/link down).ro NameString .1.3.6.1.4.1.27662.1.1.2.2.1.2 |
linkStatusMAX link status (connecting/connected/link down).ro NameString .1.3.6.1.4.1.27662.1.1.2.2.1.3 |
linkThroughputInThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.27662.1.1.2.2.1.4 |
linkThroughputOutThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.27662.1.1.2.2.1.5 |
linkDataTransferredThe numbe of bytes transferred through.ro Counter64 .1.3.6.1.4.1.27662.1.1.2.2.1.6 |
linkIpTableA list of link status. SEQUENCE OF LinkIpEntry .1.3.6.1.4.1.27662.1.1.2.3 |
linkIpEntryAn entry containing management information applicable to a particular interface. LinkIpEntry .1.3.6.1.4.1.27662.1.1.2.3.1 |
linkIpConnNumVirtual WAN index number. ConnectionNum .1.3.6.1.4.1.27662.1.1.2.3.1.1 |
linkIpIndexVirtual WAN index number. TableIndex .1.3.6.1.4.1.27662.1.1.2.3.1.2 |
linkIpMAX link IP address list.ro IpAddress .1.3.6.1.4.1.27662.1.1.2.3.1.3 |
wanUsageTableA list of interface entries. SEQUENCE OF WanUsageEntry .1.3.6.1.4.1.27662.1.1.3 |
wanUsageEntryAn entry containing management information applicable to a particular interface. WanUsageEntry .1.3.6.1.4.1.27662.1.1.3.1 |
wanUsageIndexPhysical WAN index number. TableIndex .1.3.6.1.4.1.27662.1.1.3.1.1 |
wanUsageThroughputInThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.27662.1.1.3.1.2 |
wanUsageThroughputOutThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of maxWanCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.27662.1.1.3.1.3 |
wanUsageDataTransferredThe numbe of bytes transferred through.ro Counter64 .1.3.6.1.4.1.27662.1.1.3.1.4 |
maxMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.2 |
maxRebootReboot the device. Write 'enable' to take effect.rw NameString .1.3.6.1.4.1.27662.1.2.1 |
maxLanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.3 |
portLanSpeedConfigSet device's LAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.rw PortSpeedType .1.3.6.1.4.1.27662.1.3.1 |
portWanSpeedConfigTableA list of interface entries. SEQUENCE OF PortSpeedConfigEntry .1.3.6.1.4.1.27662.1.3.2 |
portWanSpeedConfigEntryAn entry containing management information applicable to a particular interface. PortSpeedConfigEntry .1.3.6.1.4.1.27662.1.3.2.1 |
portWanSpeedConfigIndexPhysical LAN/WAN port name. TableIndex .1.3.6.1.4.1.27662.1.3.2.1.1 |
portWanSpeedConfigSet device's WAN port speed (Auto/10baseT-FD/ 10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/ 1000baseTx-HD.rw PortSpeedType .1.3.6.1.4.1.27662.1.3.2.1.2 |
lanConfigIpSet device's LAN IP address.rw IpAddress .1.3.6.1.4.1.27662.1.3.3 |
lanConfigSubnetMaskSet device's LAN sub-net mask.rw IpAddress .1.3.6.1.4.1.27662.1.3.4 |
maxConformance OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.50 |
maxCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.50.1 |
maxComplianceMAX compliance groups. Unknown .1.3.6.1.4.1.27662.1.50.1.1 |
maxGroups OBJECT IDENTIFIER .1.3.6.1.4.1.27662.1.50.2 |
maxSystemGroupMAX's system status group. Unknown .1.3.6.1.4.1.27662.1.50.2.1 |
maxLinkGroupMAX's system status group. Unknown .1.3.6.1.4.1.27662.1.50.2.2 |
maxWanGroupMAX's system status group. Unknown .1.3.6.1.4.1.27662.1.50.2.3 |
maxSetGroupMAX's system status group. Unknown .1.3.6.1.4.1.27662.1.50.2.4 |
More MIBs from PEPWAVE
Browse all PEPWAVEMIBs →The WLC MIB module enables SNMP-based monitoring and management of Cisco Wireless LAN Controllers, providing access to critical metrics such as access point status, client association counts, radio interface statistics, and controller resource utilization.
The AP-SYSTEM-NETWORK MIB enables monitoring and management of network interface configurations, IP addressing, and routing parameters for Pepwave Enterprise WiFi Access Points. It provides specific visibility into interface status, operational states, and network connectivity metrics essential for maintaining wireless infrastructure integrity.
The AP-MANAGEMENT MIB enables SNMP-based monitoring and configuration of Peplink PepWave Enterprise WiFi Access Points, specifically exposing general device status, operational parameters, and interface statistics for the access point hardware.
The WAN MIB module facilitates the monitoring and management of Wide Area Network interfaces and connectivity states, specifically tracking metrics such as interface status, throughput counters, error rates, and protocol-specific session statistics. This module enables administrators to assess link health, diagnose connectivity failures, and analyze bandwidth utilization across routed WAN segments.
The AP-SYSTEM-BASIC MIB module provides SNMP access to fundamental operational parameters and system status indicators for Peplink (PEPWAVE) Enterprise WiFi Access Points. It enables the monitoring of core device health metrics, including system uptime, CPU utilization, memory usage, and basic interface statistics required for infrastructure management.
SNMP MIB module