PEPVPN-SPEEDFUSION
Imported Objects
Objects
29 total| Object Name |
|---|
pepwave OBJECT IDENTIFIER .1.3.6.1.4.1.27662 |
productMib OBJECT IDENTIFIER .1.3.6.1.4.1.27662.200 |
generalMib OBJECT IDENTIFIER .1.3.6.1.4.1.27662.200.1 |
pepvpnMib OBJECT IDENTIFIER .1.3.6.1.4.1.27662.200.1.10 |
pepvpnMIB module for PepVPN. MODULE-IDENTITY .1.3.6.1.4.1.27662.200.1.10.1 |
pepVpnInfo OBJECT IDENTIFIER .1.3.6.1.4.1.27662.200.1.10.1.1 |
pepVpnStatusTablePepVpn status table SEQUENCE OF PepVpnStatusEntry .1.3.6.1.4.1.27662.200.1.10.1.1.2 |
pepVpnStatusEntryAn entry in the pepVpnStatusTable PepVpnStatusEntry .1.3.6.1.4.1.27662.200.1.10.1.1.2.1 |
pepVpnStatusIdPepVpn ID.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.1 |
pepVpnStatusProfileNamePepVpn profile name.ro OCTET STRING .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.2 |
pepVpnStatusConnectionStatePepVpn connection state.ro Enumeration .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.3 |
pepVpnStatusEncryptionPepVpn encryption.ro Enumeration .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.4 |
pepVpnStatusL2BridgingPepVpn L2 bridging status.ro Enumeration .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.5 |
pepVpnStatusL2VlanPepVpn L2 VLAN ID. Remark: If the value equals 0, means VLAN ID not applicable in this PepVpn.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.6 |
pepVpnRemotePeerIdPepVpn remote peer ID.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.7 |
pepVpnRemotePeerPepVpn remote peer.ro OCTET STRING .1.3.6.1.4.1.27662.200.1.10.1.1.2.1.8 |
pepVpnStatusWanTablePepVpn status network WAN table SEQUENCE OF PepVpnStatusWanEntry .1.3.6.1.4.1.27662.200.1.10.1.1.3 |
pepVpnStatusWanEntryAn entry in the pepVpnStatusWanTable PepVpnStatusWanEntry .1.3.6.1.4.1.27662.200.1.10.1.1.3.1 |
pepVpnStatusWanIdWAN id.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.1 |
pepVpnStatusWanNameWAN name.ro OCTET STRING .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.2 |
pepVpnStatusWanTxBytesWAN transmitted bytes.ro Counter64 .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.3 |
pepVpnStatusWanRxBytesWAN received bytes.ro Counter64 .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.4 |
pepVpnStatusWanDropPacketsWAN drop packets.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.5 |
pepVpnStatusWanLatencyWAN latency(units: ms).ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.3.1.6 |
pepVpnStatusRemoteNetworkTablePepVpn status remote network table SEQUENCE OF PepVpnStatusRemoteNetworkEntry .1.3.6.1.4.1.27662.200.1.10.1.1.4 |
pepVpnStatusRemoteNetworkEntryAn entry in the pepVpnStatusRemoteNetworkTable PepVpnStatusRemoteNetworkEntry .1.3.6.1.4.1.27662.200.1.10.1.1.4.1 |
pepVpnStatusRemoteNetowrkIdPepVpn remote network id.ro INTEGER .1.3.6.1.4.1.27662.200.1.10.1.1.4.1.1 |
pepVpnStatusRemoteNetworkPepVpn remote network IP.ro IpAddress .1.3.6.1.4.1.27662.200.1.10.1.1.4.1.2 |
pepVpnStatusRemoteSubnetPepVpn remote network subnet.ro IpAddress .1.3.6.1.4.1.27662.200.1.10.1.1.4.1.3 |
More MIBs from PEPWAVE
Browse all PEPWAVEMIBs →The WLC MIB module enables SNMP-based monitoring and management of Cisco Wireless LAN Controllers, providing access to critical metrics such as access point status, client association counts, radio interface statistics, and controller resource utilization.
The AP-SYSTEM-NETWORK MIB enables monitoring and management of network interface configurations, IP addressing, and routing parameters for Pepwave Enterprise WiFi Access Points. It provides specific visibility into interface status, operational states, and network connectivity metrics essential for maintaining wireless infrastructure integrity.
The PEPWAVE-MAX-MIB enables SNMP-based monitoring and management of Pepwave MAX series multi-WAN routers and cellular gateways, exposing critical operational metrics such as interface status, WAN link utilization, cellular signal strength (RSRP/SINR), session counts, and device health statistics including CPU and memory usage.
The AP-MANAGEMENT MIB enables SNMP-based monitoring and configuration of Peplink PepWave Enterprise WiFi Access Points, specifically exposing general device status, operational parameters, and interface statistics for the access point hardware.
The WAN MIB module facilitates the monitoring and management of Wide Area Network interfaces and connectivity states, specifically tracking metrics such as interface status, throughput counters, error rates, and protocol-specific session statistics. This module enables administrators to assess link health, diagnose connectivity failures, and analyze bandwidth utilization across routed WAN segments.
The AP-SYSTEM-BASIC MIB module provides SNMP access to fundamental operational parameters and system status indicators for Peplink (PEPWAVE) Enterprise WiFi Access Points. It enables the monitoring of core device health metrics, including system uptime, CPU utilization, memory usage, and basic interface statistics required for infrastructure management.