Vct-Loopdetect-59-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
29 total| Object Name |
|---|
zte OBJECT IDENTIFIER .1.3.6.1.4.1.3902 |
zxr10 OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3 |
zxr10switch OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.102 |
switch59vct OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.102.24 |
vctTableThe vctTable contains the parameter of cable. SEQUENCE OF VctEntry .1.3.6.1.4.1.3902.3.102.24.1 |
vctEntryThe parameter list of cable. VctEntry .1.3.6.1.4.1.3902.3.102.24.1.1 |
vctIfindexThe ifindex of port,it is same to ifindex. Integer32 .1.3.6.1.4.1.3902.3.102.24.1.1.1 |
vctSetIfindexThe ifindex of port, which need to be checked.rw Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.2 |
cableStatusThe status of cable, either good or fault.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.3 |
doubleCableStatus1-2The status of cable pair 1-2.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.4 |
doubleCableStatus3-6The status of cable pair 3-6.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.5 |
doubleCableStatus4-5The status of cable pair 4-5.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.6 |
doubleCableStatus7-8The status of cable pair 7-8.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.7 |
doubleCableLength1-2The length of cable pair 1-2.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.8 |
doubleCableLength3-6The length of cable pair 3-6.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.9 |
doubleCableLength4-5The length of cable pair 4-5.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.10 |
doubleCableLength7-8The length of cable pair 7-8.ro Enumeration .1.3.6.1.4.1.3902.3.102.24.1.1.11 |
switch59loopdetect OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.102.25 |
loopdetectReopenTimeThe max time when the loopdetected port isrw Integer32 .1.3.6.1.4.1.3902.3.102.25.1 |
loopdetectTableThe parameter which the loopdetectTable contains. SEQUENCE OF LoopdetectEntry .1.3.6.1.4.1.3902.3.102.25.2 |
loopdetectEntryThe parameter list shows the happened loopdetect. LoopdetectEntry .1.3.6.1.4.1.3902.3.102.25.2.1 |
loopdetectPortIfindexThe index of port, it is same to ifindex. Integer32 .1.3.6.1.4.1.3902.3.102.25.2.1.1 |
loopdetectPortOperStatusThe status of the port.ro Enumeration .1.3.6.1.4.1.3902.3.102.25.2.1.2 |
loopdetectPortControlThe loopdetect protocol enable/disable.rw Enumeration .1.3.6.1.4.1.3902.3.102.25.2.1.3 |
loopdetectPortVidThe vlan which the loopdetect port belong to.rw OCTET STRING .1.3.6.1.4.1.3902.3.102.25.2.1.4 |
loopdetectPortFlagThe result of loopdetect on the port.ro Enumeration .1.3.6.1.4.1.3902.3.102.25.2.1.5 |
loopdetectPortProtectFlagThe loopdetect protect in the port is enable/disable.rw Enumeration .1.3.6.1.4.1.3902.3.102.25.2.1.6 |
loopdetectPortReopenTimeHow long the port will be openedro Integer32 .1.3.6.1.4.1.3902.3.102.25.2.1.7 |
loopdetectVlanThe vlan contains the port which happened loopdetect.ro Integer32 .1.3.6.1.4.1.3902.3.102.25.2.1.8 |
More MIBs from Zte
Browse all ZteMIBs →SNMP MIB module
SNMP MIB module
The ZTE-AN-ENVMON-MIB module enables SNMP-based monitoring of environmental parameters within ZTE Access Node hardware, specifically tracking critical metrics such as temperature, fan status, and power supply conditions to ensure physical infrastructure integrity.
Standard SNMP MIB module defining data structures for ZXR10-SWITCH-MIB.
SNMP MIB module
The ZTE-AN-SOFTWARE-MIB module enables SNMP-based monitoring and management of software versions, patch levels, and installation states within ZTE Access Node hardware. It facilitates the tracking of critical software lifecycle metrics, including active firmware images, upgrade status, and system component integrity across the access network infrastructure.