VOICE-VLAN-MIB
AI MIB Summary
The VOICE-VLAN-MIB module enables the monitoring and management of Voice VLAN configuration parameters and operational status on Cisco proprietary enterprise network devices. It provides access to specific metrics such as voice VLAN IDs, associated interface states, and the operational status of voice traffic segregation policies.
The Voice VLAN module MIB for the proprietary enterprise.
Main OID:
swVoiceVLANMIB.dlink-common-mgmt.74
28
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
swVoiceVLANMIBThe Voice VLAN module MIB for the proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.74 |
swVoiceVlanCtrl OBJECT IDENTIFIER .dlink-common-mgmt.74.1 |
swVoiceVlanIdThe VLAN ID of the voice VLAN. The voice VLAN is used to asssign
VLAN for untagged voice packets.
If the value zero is for display only and not configurable, which
means there is no voice VLAN on the switch.rw VlanIdOrNone (Q-BRIDGE-MIB) .dlink-common-mgmt.74.1.1 |
swVoivceVlanGlobalStateThis object indicates the global status of the Voice VLAN. if we enable the voice vlan,
we should set the vid first.rw Enumeration .dlink-common-mgmt.74.1.2 |
swVoiceVlanPriorityThe priority for the voice VLAN ,which is used to distinguish
the QoS of the voice traffic from data traffic.rw INTEGER .dlink-common-mgmt.74.1.3 |
swVoiceVlanAgingTimeThe aging time for the voice VLAN ,which is used to remove a
port from a voice VLAN when the working mode is auto.rw INTEGER .dlink-common-mgmt.74.1.4 |
swVoiceVlanLogStateThis object indicates the voice VLAN log state.rw Enumeration .dlink-common-mgmt.74.1.5 |
swVoiceVlanInfo OBJECT IDENTIFIER .dlink-common-mgmt.74.2 |
swVoiceVlanMemberPortlistThe voice VLAN's member ports.ro PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.74.2.1 |
swVoiceVlanDynamicPortlistThe voice VLAN's member ports that dynamically joined the voice VLAN from a learned voice device.ro PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.74.2.2 |
swVoiceVlanDeviceTableThe Management information of a voice VLAN member ports'device. SEQUENCE OF SwVoiceVlanDeviceEntry .dlink-common-mgmt.74.2.3 |
swVoiceVlanDeviceEntryThe information from the voice device connected to the switch. SwVoiceVlanDeviceEntry .dlink-common-mgmt.74.2.3.1 |
swVoiceVlanPortThe voice device's connected port.ro INTEGER .dlink-common-mgmt.74.2.3.1.1 |
swVoiceVlanDeviceAddrThe voice device MAC address.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.74.2.3.1.2 |
swVoiceVlanDeviceStartTimeThe time the voice device first connected to the switch.ro DateAndTime (SNMPv2-TC) .dlink-common-mgmt.74.2.3.1.3 |
swVoiceVlanDeviceActiveTimeThe active time of the voice device.ro DateAndTime (SNMPv2-TC) .dlink-common-mgmt.74.2.3.1.4 |
swVoiceVlanMgmt OBJECT IDENTIFIER .dlink-common-mgmt.74.3 |
swVoiceVlanOuiTableThe Management information of the voice VLAN OUI. SEQUENCE OF SwVoiceVlanOuiEntry .dlink-common-mgmt.74.3.1 |
swVoiceVlanOuiEntryThe management information of the OUI of a voice VLAN domain.
An OUI contains information about the type of ip-phone .that can make use of the OUI
to check the voice traffic . SwVoiceVlanOuiEntry .dlink-common-mgmt.74.3.1.1 |
swVoiceVlanOuiAddrThe address of the OUI referring to this SwVoiceVlanOuiEntry.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.74.3.1.1.1 |
swVoiceVlanOuiMaskThe OUI mask indicates the valid bit of the OUI address.rw MacAddress (SNMPv2-TC) .dlink-common-mgmt.74.3.1.1.2 |
swVoiceVlanOuiDesThe description of the OUI.rw DisplayString (SNMPv2-TC) .dlink-common-mgmt.74.3.1.1.3 |
swVoiceVlanOuiRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.74.3.1.1.4 |
swVoiceVlanPortTableThe Management of the voice VLAN function on all bridge ports. Some ports are not
member ports of a voice VLAN, but they may be added in auto mode, so this function enables both current voice VLAN member ports and non-VLAN member ports to be managed. SEQUENCE OF SwVoiceVlanPortEntry .dlink-common-mgmt.74.3.2 |
swVoiceVlanPortEntryThe Management of the voice VLAN function on ports SwVoiceVlanPortEntry .dlink-common-mgmt.74.3.2.1 |
swVoiceVlanPortNumberBridge ports, can be configured with voice VLAN function.ro INTEGER .dlink-common-mgmt.74.3.2.1.1 |
swVoiceVlanPortStatePort state here indicates whether the port supports the voice VLAN function,
we can enable/disable voice vlan function on port.rw Enumeration .dlink-common-mgmt.74.3.2.1.2 |
swVoiceVlanPortModePort mode just indicates which mode of voice VLAN function is supported by port.
If in auto mode ,the port can be added in to voice vlan automatically when it connect
a ip-phone,else the port just added by mannual.rw Enumeration .dlink-common-mgmt.74.3.2.1.3 |