VIDEOFRAME-SIGMON-VM0002-MIB
AI MIB Summary
The VIDEOFRAME-SIGMON-VM0002-MIB enables SNMP-based monitoring of the VM0002 Analog Video Monitoring module by extending MIB-2 and Videoframe-specific generic and signaling MIBs to expose device-specific operational status and performance counters. This module facilitates the collection of hardware state data and signal monitoring metrics for Videoframe Systems video surveillance infrastructure.
This MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
Main OID:
videoframeSigmonVm0002MIB.1.3.6.1.4.1.4596.6.1.5
58
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
vm0002AnalogVideo OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.2 |
vm0002TableEach row contains information about one VM0002 Analog Video module in the managed VF200 frame. SEQUENCE OF Vm0002Entry .1.3.6.1.4.1.4596.4.2.1.2.1 |
vm0002EntryAn Analog Video module entry. Vm0002Entry .1.3.6.1.4.1.4596.4.2.1.2.1.1 |
vm0002SlotNumberThe slot that this entry represents.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.2.1.1.1 |
vm0002ActiveIndicates whether this entry is active (this module is in this slot).ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.1.1.2 |
vm0002FirmwareRevThe revision level of the firmware on this module.ro DisplayString .1.3.6.1.4.1.4596.4.2.1.2.1.1.3 |
vm0002LocateControls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.1.1.4 |
vm0002SignalTableEach row contains information about one channel of one VM0002 Analog Video module in the managed VF200 frame. SEQUENCE OF Vm0002SignalEntry .1.3.6.1.4.1.4596.4.2.1.2.2 |
vm0002SignalEntryAn Analog Video module channel entry. Vm0002SignalEntry .1.3.6.1.4.1.4596.4.2.1.2.2.1 |
vm0002SignalSlotNumberThe frame slot number that this entry represents.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.1 |
vm0002SignalNumberThe channel within the module to which this signal is connected.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.2 |
vm0002SignalNameThe name of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.2.2.1.3 |
vm0002SignalDescriptionDescriptive identification of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.2.2.1.4 |
vm0002VSyncLossThresholdNumber of frames with VSync errors to tolerate within the VSyncLossPeriod before alarming for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.5 |
vm0002VSyncLossPeriodThe period, in milliseconds, over which vertical sync errors are accumulated for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.6 |
vm0002VSyncLossAlarmStateThe current state of the vertical sync loss alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.7 |
vm0002VSyncLossAlarmAckSet to acknowledge (3) to acknowledge a triggered vertical sync loss alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.8 |
vm0002VSyncLossTrapEnableSet to enabled (1) to enable the vertical sync loss alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.9 |
vm0002HSyncLossThresholdNumber of frames with horizontal sync errors to tolerate within the HSyncLossPeriod before alarming for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.10 |
vm0002HSyncLossPeriodThe period, in milliseconds, over which horizontal sync loss errors are accumulated for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.11 |
vm0002HSyncLossAlarmStateThe current state of the horizontal sync loss alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.12 |
vm0002HSyncLossAlarmAckSet to acknowledge (3) to acknowledge a triggered horizontal sync loss alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.13 |
vm0002HSyncLossTrapEnableSet to enabled (1) to enable the horizontal sync loss alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.14 |
vm0002PedestalHighThresholdPedestal level above which to alarm for this channel, in units of 1/10th IRE.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.15 |
vm0002PedestalHighPeriodThe period, in milliseconds, that the pedestal must remain above the threshold to alarm for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.16 |
vm0002MeasuredPedestalThe current measured pedestal level on this channel, in units of 1/10th IRE.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.17 |
vm0002PedestalHighAlarmStateThe current state of the pedestal high alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.18 |
vm0002PedestalHighAlarmAckSet to acknowledge (3) to acknowledge a triggered pedestal high alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.19 |
vm0002PedestalHighTrapEnableSet to enabled (1) to enable the pedestal high alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.20 |
vm0002CurrentAplRawThe current average luminance value on this channel, as a raw 10-bit sample value.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.21 |
vm0002n100IRECalibrationSetSet to 'go' (2) to set the value of the 100 IRE channel calibration to the current average luminance value on this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.22 |
vm0002n100IRECalibrationValueThe current raw luminance value used as the 100 IRE reference on this channel.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.23 |
vm0002AplHighThresholdThe high APL alarm threshold for this channel, in IRE.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.24 |
vm0002AplHighDurationThe high APL duration, in milliseconds, at which to alarm, for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.25 |
vm0002AplHighAlarmStateThe current state of the high APL alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.26 |
vm0002AplHighAlarmAckSet to acknowledge (3) to acknowledge a triggered high APL alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.27 |
vm0002AplHighTrapEnableSet to enabled (1) to enable the high APL alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.28 |
vm0002AplLowThresholdThe low APL alarm threshold for this channel, in IRE.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.29 |
vm0002AplLowDurationThe low APL duration, in milliseconds, at which to alarm, for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.30 |
vm0002AplLowAlarmStateThe current state of the low APL alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.31 |
vm0002AplLowAlarmAckSet to acknowledge (3) to acknowledge a triggered low APL alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.32 |
vm0002AplLowTrapEnableSet to enabled (1) to enable the low APL alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.33 |
vm0002FrozenImageFilterThe algorithm to use for the frozen image alarm for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.34 |
vm0002MaxFrozenDurationThe frozen image duration, in milliseconds, at which to alarm, for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.2.2.1.35 |
vm0002FrozenAlarmStateThe current state of the frozen image alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.36 |
vm0002FrozenAlarmAckSet to acknowledge (3) to acknowledge a triggered frozen image alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.37 |
vm0002FrozenTrapEnableSet to enabled (1) to enable the frozen image alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.38 |
vm0002BurstPresentIndicates whether color burst is present on this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.2.2.1.39 |
vm0002AnalogVideoEvents OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.2.3 |
vm0002AnalogVideoEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.2.3.0 |
analogVideoVSyncLossAlarmAn Analog Video vertical sync loss alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.1 |
analogVideoHSyncLossAlarmAn Analog Video horizontal sync loss alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.2 |
analogVideoPedestalHighAlarmAn Analog Video pedestal high alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.3 |
analogVideoAPLHighAlarmAn Analog Video APL high alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.4 |
analogVideoAPLLowAlarmAn Analog Video APL low alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.5 |
analogVideoFrozenImageAlarmAn Analog Video frozen image alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.2.3.0.6 |
videoframeSigmonVm0002MIBThis MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc. MODULE-IDENTITY .1.3.6.1.4.1.4596.6.1.5 |
vfProductsVM0002RegVideoframe VM0002 Analog Video Monitoring Module. OBJECT IDENTIFIER .1.3.6.1.4.1.4596.6.2.5.2 |