VIDEOFRAME-SIGMON-VM0001-MIB
AI MIB Summary
The VIDEOFRAME-SIGMON-VM0001-MIB module enables SNMP-based monitoring of the VM0001 Analog Audio Monitoring hardware, extending standard MIB-2 and Videoframe-specific generic and signaling modules to track analog audio signal status and device health metrics.
This MIB describes the device specific objects of the VM0001 Analog Audio Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
Main OID:
videoframeSigmonVm0001MIB.1.3.6.1.4.1.4596.6.1.4
55
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
vm0001AnalogAudio OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.1 |
vm0001TableEach row contains information about one VM0001 Analog Audio module in the managed VF200 frame. SEQUENCE OF Vm0001Entry .1.3.6.1.4.1.4596.4.2.1.1.1 |
vm0001EntryAn Analog Audio module entry. Vm0001Entry .1.3.6.1.4.1.4596.4.2.1.1.1.1 |
vm0001SlotNumberThe slot that this entry represents.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.1.1.1 |
vm0001ActiveIndicates whether this entry is active (this module is in this slot).ro Enumeration .1.3.6.1.4.1.4596.4.2.1.1.1.1.2 |
vm0001FirmwareRevThe revision level of the firmware on this module.ro DisplayString .1.3.6.1.4.1.4596.4.2.1.1.1.1.3 |
vm0001LocateControls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.1.1.4 |
vm0001SignalTableEach row contains information about one channel of one VM0001 Analog Audio module in the managed VF200 frame. SEQUENCE OF Vm0001SignalEntry .1.3.6.1.4.1.4596.4.2.1.1.2 |
vm0001SignalEntryAn Analog Audio module channel entry. Vm0001SignalEntry .1.3.6.1.4.1.4596.4.2.1.1.2.1 |
vm0001SignalSlotNumberThe frame slot number that this entry represents.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.1 |
vm0001SignalNumberThe channel within the module to which this signal is connected.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.2 |
vm0001SignalNameThe name of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.1.2.1.3 |
vm0001SignalDescriptionDescriptive identification of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.1.2.1.4 |
vm0001CurrentAplRawThe current average amplitude value on this channel, in raw sample units.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.5 |
vm0001ZerodBCalibrationSetSet to 'go' (2) to set the value of the 0 dB channel calibration to the current average amplitude value on this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.6 |
vm0001ZerodBCalibrationValueThe current raw sample amplitude value used as the 0 dB reference on this channel.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.7 |
vm0001AplHighThresholdThe high APL alarm threshold for this channel, in dB.rw INTEGER(-80..30) .1.3.6.1.4.1.4596.4.2.1.1.2.1.8 |
vm0001AplHighDurationThe high APL duration, in milliseconds, at which to alarm, for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.9 |
vm0001AplHighAlarmStateThe current state of the high APL alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.10 |
vm0001AplHighAlarmAckSet to acknowledge (3) to acknowledge a triggered high APL alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.11 |
vm0001AplHighTrapEnableSet to enabled (1) to enable the high APL alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.12 |
vm0001AplLowThresholdThe low APL alarm threshold for this channel, in dB.rw INTEGER(-80..30) .1.3.6.1.4.1.4596.4.2.1.1.2.1.13 |
vm0001AplLowDurationThe low APL duration, in milliseconds, at which to alarm, for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.14 |
vm0001AplLowAlarmStateThe current state of the low APL alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.15 |
vm0001AplLowAlarmAckSet to acknowledge (3) to acknowledge a triggered low APL alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.16 |
vm0001AplLowTrapEnableSet to enabled (1) to enable the low APL alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.17 |
vm0001PeakThresholdThe peak level above which to alarm.rw INTEGER(-80..30) .1.3.6.1.4.1.4596.4.2.1.1.2.1.18 |
vm0001PeakPeriodThe period, in milliseconds, over which the peak value is accumulated for this channel.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.1.2.1.19 |
vm0001PeakAlarmStateThe current state of the peak-threshold-exceeded alarm for this channel.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.20 |
vm0001PeakAlarmAckSet to acknowledge (3) to acknowledge a triggered peak alarm for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.21 |
vm0001PeakTrapEnableSet to enabled (1) to enable the peak alarm trap for this channel.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.2.1.22 |
vm0001StereoPairTableEach row contains information about one stereo pair on one VM0001 Analog Audio module in the managed VF200 frame. SEQUENCE OF Vm0001StereoPairEntry .1.3.6.1.4.1.4596.4.2.1.1.3 |
vm0001StereoPairEntryAn Analog Audio module channel entry. Vm0001StereoPairEntry .1.3.6.1.4.1.4596.4.2.1.1.3.1 |
vm0001StereoPairSlotNumberThe slot that this entry represents.ro INTEGER .1.3.6.1.4.1.4596.4.2.1.1.3.1.1 |
vm0001StereoPairNumberThe channel within the module to which this signal is connected.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.1.3.1.2 |
vm0001StereoPairNameThe name of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.1.3.1.3 |
vm0001StereoPairDescriptionDescriptive identifier of the signal connected to this channel.rw DisplayString .1.3.6.1.4.1.4596.4.2.1.1.3.1.4 |
vm0001MonoFilterThe filter type currently selected for the mono alarm for this stereo pair.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.1.3.1.5 |
vm0001MonoDurationThe mono duration, in milliseconds, at which to alarm, for this stereo pair.rw Integer32 .1.3.6.1.4.1.4596.4.2.1.1.3.1.6 |
vm0001MonoAlarmStateThe current state of the mono alarm for this stereo pair.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.3.1.7 |
vm0001MonoAlarmAckSet to acknowledge (3) to acknowledge a triggered mono alarm for this stereo pair.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.3.1.8 |
vm0001MonoTrapEnableSet to enabled (1) to enable the high APL alarm trap for this stereo pair.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.3.1.9 |
vm0001StereoOutOfPhaseFilterThe filter type currently selected for the stereo out of phase alarm for this stereo pair.rw INTEGER .1.3.6.1.4.1.4596.4.2.1.1.3.1.10 |
vm0001StereoOutOfPhaseDurationThe stereo out of phase duration, in milliseconds, at which to alarm, for this stereo pair.rw Integer32 .1.3.6.1.4.1.4596.4.2.1.1.3.1.11 |
vm0001StereoOutOfPhaseAlarmStateThe current state of the stereo out of phase alarm for this stereo pair.ro Enumeration .1.3.6.1.4.1.4596.4.2.1.1.3.1.12 |
vm0001StereoOutOfPhaseAlarmAckSet to acknowledge (3) to acknowledge a triggered stereo out of phase alarm for this stereo pair.rw Enumeration .1.3.6.1.4.1.4596.4.2.1.1.3.1.13 |
vm0001AnalogAudioEvents OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.1.4 |
vm0001AnalogAudioEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1.1.4.0 |
analogAudioAPLHighAlarmAn Analog Audio APL high alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.1.4.0.1 |
analogAudioAPLLowAlarmAn Analog Audio APL low alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.1.4.0.2 |
analogAudioPeakAlarmAn Analog Audio peak threshold exceeded alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.1.4.0.3 |
analogAudioMonoAlarmAn Analog Audio mono alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.1.4.0.4 |
analogAudioStereoOutOfPhaseAlarmAn Analog Audio stereo out of phase alarm was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.1.1.4.0.5 |
videoframeSigmonVm0001MIBThis MIB describes the device specific objects of the VM0001 Analog Audio Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc. MODULE-IDENTITY .1.3.6.1.4.1.4596.6.1.4 |
vfProductsVM0001RegVideoframe VM0001 Analog Audio Monitoring Module. OBJECT IDENTIFIER .1.3.6.1.4.1.4596.6.2.5.1 |