VIDEOFRAME-SIGMON-MIB
The VIDEOFRAME-SIGMON-MIB enables SNMP-based monitoring of signal integrity and frame synchronization metrics on Videoframe Systems video transport hardware. It provides specific device objects for tracking signal quality parameters and frame status to facilitate the management of video transport sessions.
Imported Objects
Objects
37 total| Object Name |
|---|
vfSigmonFrame OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2 |
vfSigmonFrameModuleTypes OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.1 |
vfFrameSlotTableEach row contains information about one slot in the managed VF200 frame. SEQUENCE OF VfFrameSlotEntry .1.3.6.1.4.1.4596.4.2.2 |
vfFrameSlotEntryInformation about one slot in the managed VF200 frame. VfFrameSlotEntry .1.3.6.1.4.1.4596.4.2.2.1 |
vfFrameSlotNumberSlot number in frame.ro INTEGER .1.3.6.1.4.1.4596.4.2.2.1.1 |
vfFrameSlotStatusState of this slot. Illegal means the slot does not exist. moduleValid means the correct firmware has been loaded to the module and it is ready for operation.ro Enumeration .1.3.6.1.4.1.4596.4.2.2.1.2 |
vfModuleTypeRegObjectIDMIB-registered identification of the module currently installed in this slot.ro OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.2.1.3 |
vfModuleTypeRootOIDRoot OID of the module-specific managed information for the module currently installed in this slot.ro OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.2.1.4 |
vfModulePartNoVideoframe part no. of module currently installed in slot - should match module nameplate.ro DisplayString .1.3.6.1.4.1.4596.4.2.2.1.5 |
vfModuleDescriptionDescription of module currently installed in slot - should match module nameplate.ro DisplayString .1.3.6.1.4.1.4596.4.2.2.1.6 |
vfModuleTrapEnableEnables or disables the Trap that is associated with a slot status change event or module event.rw Enumeration .1.3.6.1.4.1.4596.4.2.2.1.7 |
vfModuleAlarmAutoReArmEnables or disables automatic re-arming of alarms from signal monitoring modules.rw Enumeration .1.3.6.1.4.1.4596.4.2.2.1.8 |
vfFrameOfflineSwitchIndicates the state of the 'offline' switch for the frame. 'offline' indicates the switch is set to take the frame offline.ro Enumeration .1.3.6.1.4.1.4596.4.2.3 |
vfFrameLocateIndicatorSet to flash (1) to cause the locate LED on the front of the frame to begin flashing. Set to off to stop flashing. This is used to verify the identity of a particular unit among racks of units.rw Enumeration .1.3.6.1.4.1.4596.4.2.4 |
vfFrameAdminStateThe desired operational state of this device. Use this object to command the frame to a different operational state (vfBoxState from the vf-generic MIB module). NOTE: It is mandatory that a managed device support all of the enumerated device states. vfFrameOnline(1) - The device is running and ready to process load. vfFrameInMaintenance(2) - The device is online, but either the device as a whole, or one or more of its components are in maintenance mode. Maintenance mode could be described as a mode where diagnostics are being run on the device, or some tasks such as device configuration are being excuted on the device that has inhibited its normal operation. vfFrameDisabled(3) - The device has been explicitly disabled from its normal mode of operation, such as when selected as the backup of a redundant pair. vfFrameResetting(4) - The device is in a reset cycle. Any information collected, or dynamic configuration of the device prior to this state may be lost.rw Enumeration .1.3.6.1.4.1.4596.4.2.5 |
vfNumDerivedNotificationsNumber of derived notifications defined in vf200 configuration file for this unit. Gives size of derived notifications table.ro INTEGER .1.3.6.1.4.1.4596.4.2.6 |
vfDerivedNotificationTableEach row contains information about one derived notification defined for the managed VF200 frame. SEQUENCE OF VfDerivedNotificationEntry .1.3.6.1.4.1.4596.4.2.7 |
vfDerivedNotificationEntryA row in the derived notification table. VfDerivedNotificationEntry .1.3.6.1.4.1.4596.4.2.7.1 |
vfDnFunctionNumberDerived Notification Function Number. Identifies derived notification function, define in frame config. file.ro Integer32 .1.3.6.1.4.1.4596.4.2.7.1.1 |
vfDnFunctionDescriptionDerived Notification Description. Describes derived notification function for the operator. Set in frame config. file.ro DisplayString .1.3.6.1.4.1.4596.4.2.7.1.2 |
vfDnNotificationLevelNotification level for this derived notification. selects which trap will be sent for the notification, out of four possible.rw Enumeration .1.3.6.1.4.1.4596.4.2.7.1.3 |
vfDnNotificationEnableUse to enable or disable this derived notification function.rw Enumeration .1.3.6.1.4.1.4596.4.2.7.1.4 |
vfDnNotificationAutoReArmUse to enable or disable automatic re-arming of this derived notification function. Auto re-arming allows multiple unacknowledged activations of the derived notification. It re-arms the function after notification so that the specified alarms are again monitored according to the logic function.rw Enumeration .1.3.6.1.4.1.4596.4.2.7.1.5 |
vfDnNotificationStateThe current state of this derived notification function.ro Enumeration .1.3.6.1.4.1.4596.4.2.7.1.6 |
vfDnNotificationAcknowledgeUse to acknowledge a derived notification. If notificationAutoReArm is disabled, this will re-arm the notification. Otherwise, it is automatically re-armed, and this object is not used.rw Enumeration .1.3.6.1.4.1.4596.4.2.7.1.7 |
vfSigmonFrameEvents OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.8 |
vfSigmonFrameEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.8.0 |
vfFrameSlotStatusChangeA slot status change occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.8.0.1 |
vfSigmonFrameDerivedEvents OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.9 |
vfSigmonFrameDerivedEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.4596.4.2.9.0 |
derivedNotificationLevelAA LevelA derived notification was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.9.0.1 |
derivedNotificationLevelBA LevelB derived notification was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.9.0.2 |
derivedNotificationLevelCA LevelC derived notification was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.9.0.3 |
derivedNotificationLevelDA LevelD derived notification was triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.4596.4.2.9.0.4 |
videoframeSigmonMIBThis MIB describes the device specific objects of the Videoframe Signal Monitoring Frame, and augments MIB-2 and VF-GENERIC in the identification of this Videoframe Systems managed device. This module will be extended, or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end-users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc. MODULE-IDENTITY .1.3.6.1.4.1.4596.6.1.3 |
vfProductsSignalMonitoringFrameRegVideoframe signal monitoring frame with hot-swappable modules, and monitoring via SNMP and gvg modular protocol. OBJECT IDENTIFIER .1.3.6.1.4.1.4596.6.2.4 |
vfProductsVF200RegVF200 2RU modular frame for Signal Monitoring and machine control functions. OBJECT IDENTIFIER .1.3.6.1.4.1.4596.6.2.5 |
More MIBs from Videoframe
Browse all VideoframeMIBs →The VIDEOFRAME-SIGMON-VM0002-MIB enables SNMP-based monitoring of the VM0002 Analog Video Monitoring module by extending MIB-2 and Videoframe-specific generic and signaling MIBs to expose device-specific operational status and performance counters. This module facilitates the collection of hardware state data and signal monitoring metrics for Videoframe Systems video surveillance infrastructure.
The VIDEOFRAME-SIGMON-VM0001-MIB module enables SNMP-based monitoring of the VM0001 Analog Audio Monitoring hardware, extending standard MIB-2 and Videoframe-specific generic and signaling modules to track analog audio signal status and device health metrics.
The VIDEOFRAME-SIGMON-VM0007-MIB provides vendor-specific SNMP objects for monitoring the operational status and signaling states of the Videoframe VM0007 video transfer switch hardware. It extends standard MIB-2 and Videoframe generic modules to expose device identification and specific performance metrics required for managing this legacy video infrastructure.
The VIDEOFRAME-GENERIC-MIB provides the foundational identification and generic management objects for Videoframe Systems video frame transport devices, serving as the mandatory base layer that augments MIB-2 to distinguish these specific hardware platforms within an SNMP management infrastructure. It establishes the standard namespace for device classification and common attributes, enabling network management systems to recognize and interact with Videoframe video transmission equipment before accessing vendor-specific operational metrics.
The VIDEOFRAME-SIGMON-VM0006-MIB provides vendor-specific SNMP objects for monitoring the operational status and signal integrity of the Videoframe VM0006 GPI Interface Module, extending standard MIB-2 and Videoframe generic definitions to track interface state, signal activity, and device identification parameters.
The VIDEOFRAME-SIGMON-VM0010-MIB provides device-specific SNMP objects for monitoring the Videoframe Systems VM0010 GPO module, augmenting standard MIB-2 and Videoframe-specific generic and signaling monitoring structures to track hardware status and signaling states. This module enables the collection of operational metrics and fault indicators specific to the VM0010 video processing unit within a network management system.