VENTURI-WIRELESS-SMI
The VENTURI-WIRELESS-SMI module defines the foundational schema for SNMP-managed Venturi Wireless access points and controllers, establishing the structural basis for retrieving device status, radio interface parameters, and client association metrics.
Imported Objects
Objects
3 total| Object Name |
|---|
venturiWirelessThe root MIB module for Venturi Wireless Copyright 2004-2011 Venturi Wireless All rights reserved. This MIB module specifies the overall structure of Venturi Wireless SNMP accessible management information. MODULE-IDENTITY .1.3.6.1.4.1.3382 |
venturiProductsventuriProducts is the root OBJECT IDENTIFIER from which product categories are assigned. Each product category will define the sysObjectID for its product line. OBJECT IDENTIFIER .1.3.6.1.4.1.3382.11 |
venturiMgmtventuriMgmt is the root OBJECT IDENTIFIER from which product specific MIBS are defined. OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12 |
More MIBs from Venturi Wireless
Browse all Venturi WirelessMIBs →The VENTURI-SERVER-CONFIG-MIB enables SNMP-based configuration and parameter management of Venturi Wireless optimization servers, specifically targeting the tuning of traffic optimization policies and server operational states. This module facilitates the remote adjustment of server-side optimization parameters to control data compression, caching behavior, and protocol acceleration settings within the vendor's network infrastructure.
The VENTURI-SERVER-STATS-MIB enables SNMP polling of performance counters and operational statistics for Venturi Wireless server infrastructure, specifically tracking metrics such as active session counts, throughput volumes, and system resource utilization. This module facilitates the monitoring of wireless access point aggregation and traffic flow data within Venturi's server-based wireless networking environments.
The FOURELLE-VENTURI2-MIB defines the SNMP management structure for Venturi Wireless Rel 2 hardware, enabling the monitoring of wireless access point operational status, radio interface parameters, and client association statistics.
The VENTURI-SERVER-TRAP-MIB defines the specific SNMP trap definitions for Venturi Wireless compression servers to alert network management systems on critical server events and operational state changes. It enables the monitoring of server-side compression session failures, link status transitions, and hardware fault conditions without requiring active polling.
The VENTURI-SERVER-SYSTEM-MIB module provides SNMP access to general system status and operational metrics for Venturi Wireless server hardware. It enables monitoring of core device attributes such as system uptime, hardware health, and basic resource utilization specific to the Venturi server platform.
The VENTURI-SERVER-MIB module facilitates the identification of Venturi Wireless server hardware models by exposing specific product registration OIDs within the `sysObjectID` system object. This mechanism enables network management systems to distinguish between different Venturi server variants for accurate device classification and inventory tracking.