VENTURI-SERVER-SYSTEM-MIB
AI MIB Summary
The VENTURI-SERVER-SYSTEM-MIB module provides SNMP access to general system status and operational metrics for Venturi Wireless server hardware. It enables monitoring of core device attributes such as system uptime, hardware health, and basic resource utilization specific to the Venturi server platform.
Venturi Server system information Copyright 2004-2013 Venturi Wireless All rights reserved. This MIB module general system information available from Venturi servers.
Main OID:
vServerSystem.1.3.6.1.4.1.3382.12.1.2
57
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
vServerSystemVenturi Server system information Copyright 2004-2013 Venturi Wireless All rights reserved. This MIB module general system information available from Venturi servers. MODULE-IDENTITY .1.3.6.1.4.1.3382.12.1.2 |
vServerGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.1 |
vServerGeneralScalars OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.1.1 |
vServerTypeIndicates whether the software is running as a client, a vServer, or both. Note: The BITS syntax describes an object implemented as an OCTET STRING where each of the bits have a meaning. So, vServerType will be returned as a single octet. The most significant bit of this octet indicates whether the system is a Venturi vServer and the next bit indicates whether it is a client. The value returned for a vServer will be x80, for a client x40, and for a system acting as both client and vServer xC0. The values in parentheses next to 'client' and 'vServer' in the definition above indicate the bit number.ro Bits .1.3.6.1.4.1.3382.12.1.2.1.1.1 |
vServerVersionVenturi software version string. This will normally be of the form X.Y.Z where X = major release number Y = minor release number Z = fix release numberro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.1.2 |
vServerStartTimeTime the Venturi software started execution in seconds since midnight, January 1, 1970 GMT.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.1.3 |
vServerUpTimeTime since the Venturi software was started. This will often be the time since last boot, but may be shorter if the Venturi software was restarted for some reason, such as to clear an error condition. The units of this object are TimeTicks, which are 1/100 of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3382.12.1.2.1.1.4 |
vServerBuildIdThe software build identifier. General releases normally use a build number as the value for this object, but this value is not guaranteed to be numeric in all cases. It may include alpha characters to indicate special builds.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.1.5 |
vServerMaxClientsThis is the maximum number of simultaneous client connections supportable by this server. Attempts to connect clients in excess of this number will be rejected. A count of the number of such rejections is available in the object vServerClientLimitExceeded in the VENTURI-STATS-MIB.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.1.6 |
vServerMaxClientlessMaximum number of simultaneous clientless connections supportable by this server.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.1.7 |
vServerSerialNumberOpaque string uniquely identifying the server.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.1.8 |
vServerNumCPUsNumber of physical CPUs in this server. Due to technologies used by CPU manufacturers, this may be less than the number of logical CPUs.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.1.9 |
vServerMaxTcpBandwidthMaximum TCP bandwidth.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.1.10 |
vServerClientUpdateVersionIf set, clients below this version should be upgraded.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3382.12.1.2.1.1.11 |
vServerMemoryRAMThe amount of RAM.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.3382.12.1.2.1.1.12 |
vServerMemorySwapThe amout of swap space.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.3382.12.1.2.1.1.13 |
vServerGeneralTables OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.1.2 |
vServerCPUTableA table of information about the physical CPUs of the system. SEQUENCE OF ServerCPUEntry .1.3.6.1.4.1.3382.12.1.2.1.2.1 |
vServerCPUEntryAn entry in the CPU table. ServerCPUEntry .1.3.6.1.4.1.3382.12.1.2.1.2.1.1 |
vServerCPUIdA number identifying the CPU.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.2.1.1.1 |
vServerCPUClockSpeedThe clock speed of the CPU.ro Integer32 UNITS "Hz" .1.3.6.1.4.1.3382.12.1.2.1.2.1.1.2 |
vServerCPUCacheSizeThe size of the CPU's on-board cache in kilobytes.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.3382.12.1.2.1.2.1.1.3 |
vServerCPUVendorNameThe CPU's Manufacturer.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.2.1.1.4 |
vServerCPUModelNameThe CPU's model name.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.2.1.1.5 |
vServerStorageTableA table of information about the physical Storages of the system. SEQUENCE OF ServerStorageEntry .1.3.6.1.4.1.3382.12.1.2.1.2.2 |
vServerStorageEntryAn entry in the Storage table. ServerStorageEntry .1.3.6.1.4.1.3382.12.1.2.1.2.2.1 |
vServerStorageIdA number identifying the storage device.ro Integer32 .1.3.6.1.4.1.3382.12.1.2.1.2.2.1.1 |
vServerStorageDeviceNameThe Storage's Manufacturer.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.2.2.1.2 |
vServerStorageModelNameThe Storage's model name.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.2.1.2.2.1.3 |
vServerStorageSizeThe size of the Storage's on-board cache in kilobytes.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.3382.12.1.2.1.2.2.1.4 |
vServerAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.2 |
vServerAlarmScalars OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.2.1 |
vServerAlarmTables OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.2.2 |
vServerConditionTableA table of reportable conditions. The entry into or exit from one of these conditions may be reported in a number of ways, including an entry in the log file, a syslog event, an SNMP trap and/or and email message. (See the vServerAlertRoutingTbl in the VENTURI-SERVER-CONFIG-MIB for the current alert routing.) Note that the alerts tied to conditions in this table are grouped into set/clear pairs. There are also informational alerts which are not tied to these conditions and merely report the occurance of some event. SEQUENCE OF ServerConditionEntry .1.3.6.1.4.1.3382.12.1.2.2.2.1 |
vServerConditionEntryAn entry in the condition table. ServerConditionEntry .1.3.6.1.4.1.3382.12.1.2.2.2.1.1 |
vServerConditionTypeA number identifying the condition by its row number in the Condition Table.ro VenturiConditionType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.1 |
vServerConditionSetTrapNumThis is the SNMP trap number associated with entering the condition. Condition alerts are in SET/CLEAR pairs. This is the trap number associated with the SET.ro Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.2 |
vServerConditionClearTrapNumThis is the SNMP trap number associated with exiting the condition. Condition alerts are in SET/CLEAR pairs. This is the trap number associated with the CLEAR.ro Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.3 |
vServerConditionStateThe state of the condition. A value of yes(2) indicates the condition is in the SET state. A value of no(1) indicates the condition is in the CLEAR state. Polling this object can be used as an alternative to receiving SET and CLEAR traps, or it can be used to verify the state of the condition periodically in case a trap may have been missed. (SNMP traps are sent in UDP datagrams which are inherently unreliable.)ro VenturiConditionState (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.4 |
vServerConditionThresholdApplicableA yes(2) value for this object indicates the condition represented by that row in the table is governed by the high and low thresholds in that table row. A no(1) value indicates the thresholds in that row of the Condition Table are not relevant to the triggering or clearing of that condition.ro VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.5 |
vServerConditionHighThresholdRepresents the high threshold of the condition. If threshold is not applicable, the value will be 0.rw Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.6 |
vServerConditionLowThresholdRepresents the low threshold of the condition. If threshold is not applicable, the value will be 0.rw Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.7 |
vServerConditionCurValueRepresents the current value of the measure tested against the thresholds to set or clear this condition. If threshold is not applicable, the value will be 0.ro Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.8 |
vServerConditionSetSeverityRepresents the trap severity configured for the set trap for this condition. Do not confuse this with the log priority for this event, which is compared against the overall log threshold to decide whether to generate an alert when this condition enters the SET state. This object merely indicates the value that will be sent as the varbind 'trapServerity' with the SET trap for this condition.rw Unsigned32 .1.3.6.1.4.1.3382.12.1.2.2.2.1.1.9 |
vServerActions OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.3 |
vServerActionScalars OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.3.1 |
vServerActionRebootSet to yes(2) to trigger a server reboot.rw VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.3.1.1 |
vServerActionPushNowSet to yes(2) to trigger a push of all files ready for push to an FTP or SCP server.rw VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.3.1.2 |
vServerActionSendTestTrapSet to yes(2) to send an SNMP test trap.rw VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.3.1.3 |
vServerActionSendAllTrapsSet to yes(2) to send test versions of all traps in the Venturi Trap MIB currently supported on the server.rw VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.3.1.4 |
vServerActionSendEnabledTrapsSet to yes(2) to send test versions of all traps in the Venturi Trap MIB which would be sent at currently configured priorities. In the Venturi server, all traps are generated from logs. Each log has a configured priority which is compared against a configured log threshold before recording. This object will cause traps to be sent only if the associated log would be recorded. The intention is to give the user a way to check that priorities and threshold are configured as intended.rw VenturiBooleanType (VENTURI-TC) .1.3.6.1.4.1.3382.12.1.2.3.1.5 |
vServerActionTables OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.2.3.2 |
vServerFscOverrideTableThis is a single row table grouping together the Client Id identifying the row in the vServerClientInfoTable and the new Fsc value for that row. SEQUENCE OF VServerFscOverrideEntry .1.3.6.1.4.1.3382.12.1.2.3.2.1 |
vServerFscOverrideEntryAn entry in the scaling table. VServerFscOverrideEntry .1.3.6.1.4.1.3382.12.1.2.3.2.1.1 |
vServerFscOverrideRowIdThe row number in this table. Unsigned32 .1.3.6.1.4.1.3382.12.1.2.3.2.1.1.1 |
vServerFscOverrideClientIdThe Client Id identifying the row in the ClientInfo table.rw DisplayString .1.3.6.1.4.1.3382.12.1.2.3.2.1.1.2 |
vServerFscOverrideFscThe new Fsc value to apply to the row in the vServerClientInfoTable idicated by the Client Id.rw DisplayString .1.3.6.1.4.1.3382.12.1.2.3.2.1.1.3 |