VENTURI-SERVER-TRAP-MIB
AI MIB Summary
The VENTURI-SERVER-TRAP-MIB defines the specific SNMP trap definitions for Venturi Wireless compression servers to alert network management systems on critical server events and operational state changes. It enables the monitoring of server-side compression session failures, link status transitions, and hardware fault conditions without requiring active polling.
The Trap MIB module for Venturi Wireless Server Copyright 2005-2011 Venturi Wireless All rights reserved. This MIB module specifies the traps that may be sent from a Venturi Wireless compression server.
Main OID:
vServerTraps.1.3.6.1.4.1.3382.12.1.1
71
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
vServerTrapsThe Trap MIB module for Venturi Wireless Server Copyright 2005-2011 Venturi Wireless All rights reserved. This MIB module specifies the traps that may be sent from a Venturi Wireless compression server. MODULE-IDENTITY .1.3.6.1.4.1.3382.12.1.1 |
vServerTrapDefTraps are defined below this point. OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.1.0 |
vServerStoppedTrap issued when Venturi software is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.1 |
vServerStartedTrap issued when Venturi software starts execution. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.2 |
vServerSwapOverloadTrap issued when the Venturi server is out of swap space. The current percent of swap space used (currentValue) and the set and clear threshold percentages are included with the trap. The swap overload condition is set when a rising swap usage crosses the setThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.3 |
vServerSwapOverloadClearTrap issued to indicate that swap usage has dropped below the clear threshold and the swap overload condition is no longer in effect. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.4 |
vServerNetworkErrorTrap generated due to problems related to network initialization. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.5 |
vServerNetworkErrorClearTrap issued to indicate that the earlier problem with network initialization has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.6 |
vServerKernelErrorTrap generated due to problems related to the kernel. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.7 |
vServerKernelErrorClearTrap issued to indicate that the earlier problem with the kernel has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.8 |
vServerLicenseErrorTrap generated due to problems related to hardware licensing. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.9 |
vServerLicenseErrorClearTrap issued to indicate that the earlier problem with hardware licensing has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.10 |
vServerSharedMemoryErrorTrap generated due to problems related to shared memory. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.11 |
vServerSharedMemoryErrorClearTrap issued to indicate that the earlier problem with shared memory access has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.12 |
vServerFileSystemErrorTrap generated due to problems related to the file system. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.13 |
vServerFileSystemErrorClearTrap issued to indicate that the earlier problem with file system access has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.14 |
vServerTCPOverloadTrap issued when the threshold for the TCP bandwidth has been exceeded on this server. The trap includes the current bandwidth usage (currentValue) and the set and clear thresholds, all of which are expressed as percentages of the server's rated capacity. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.15 |
vServerTCPOverloadClearTrap issued to indicate that the Venturi servers' TCP bandwidth utilization has dropped below the alarm threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.16 |
vServerCacheOverloadTrap issued when the free space on cache partition drops under the set threshold. For reference, the trap includes the name of the file system (disk) containing the cache, the current percent free (currentValue) and the set and clear thresholds for the overload condition. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.17 |
vServerCacheOverloadClearTrap issued to indicate that cache free space has returned to an acceptable level. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.18 |
vServerLogOverloadTrap issued when the free space on log partition is under the set threshold. For reference, the trap includes the name of the file system (disk) containing the logs, the current percent free (currentValue) and the sent and clear thresholds for the overload condition. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.19 |
vServerLogOverloadClearTrap issued to indicate that the earlier problem with free log space has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.20 |
vServerFanFailureTrap issued when the speed of one of the fans falls below an acceptable threshold. The trap indicates the failing fan (fan), current fan speed (currentValue) in RPMs and the set and clear threshold speeds. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.21 |
vServerFanFailureClearTrap issued after a fan failure, when the operation of all fans has returned to acceptable parameters. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.22 |
vServerPowerSupplyFailureTrap issued when one of the voltages from the power supply is out of the unacceptable range. The trap indicates the voltage out of spec (powerSupplyLead), its current value (currentValue), and the high and low thresholds for the acceptable range. Measures are in volts. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.23 |
vServerPowerSupplyFailureClearTrap issued after a power supply failure, when the voltage on all power supply leads has returned to acceptable values. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.24 |
vServerTemperatureExceededTrap issued when the temperature of the system exceeds an acceptable level. The trap includes the name of the sensor indicating excessive heat, its current value and the maximum value allowed (threshold). Temperatures are expressed in degrees Celsius. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.25 |
vServerTemperatureExceededClearTrap issued after a temperature exceeded alarm, when all sensors are again reporting acceptable temperatures. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.26 |
vServerStatsDeliveryFailureTrap generated due to problems related to uploading statistics to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.27 |
vServerStatsDeliveryClearTrap generated when a previously reported statistics collection failure has been corrected and statistics collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.28 |
vServerLogDeliveryFailureTrap generated due to problems related to uploading event logs to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.29 |
vServerLogDeliveryClearTrap generated when a previously reported log collection failure has been corrected and log collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.30 |
vServerURLDeliveryFailureTrap generated due to problems related to uploading event URL logs to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.31 |
vServerURLDeliveryClearTrap generated when a previously reported URL log collection failure has been corrected and URL log collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.32 |
vServerModuleInitFailureTrap issued when Venturi is starting and a module fails to initialize. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.33 |
vServerModuleInitFailureClearTrap issued after a vServerModuleInitFailure to indicate the problem has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.34 |
vServerDiskFailureTrap issued on a failure of the hard disk. The failing disk is indicated in the trap. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.35 |
vServerTestTrapTrap issued at user request. The product user interface has an option to issue a test trap as a diagnostic tool. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.37 |
vServerLicensesExceededTrap issued when the use of the system has exceeded the number of licenses purchased. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.39 |
vServerRadiusServerErrorTrap issued when we fail to connect to a RADIUS server. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.41 |
vServerRadiusServerErrorClearTrap issued when we succeed connecting to a RADIUS server after a previous failure. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.42 |
vServerLowCriticalBuffersThe server is experiencing a critical low buffer condition. While in this condition new client connections will be rejected and only in-sequence packets will be acknowledged. This may be experienced as a slowdown in the server and is an indication that the server is operating beyond its capacity. The trap includes the current number of free buffers and the threshold. When the server's free buffer level drops below this threshold the server enters this condition. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.43 |
vServerLowCriticalBuffersClearTrap issued when the server normal buffer reserves have been restored. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.44 |
vServerClientStatsDeliveryFailureTrap generated due to problems related to uploading client statistics to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.45 |
vServerClientStatsDeliveryClearTrap generated when a previously reported client statistics collection failure has been corrected and statistics collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.46 |
vServerClientUpgradeDeliveryFailureTrap generated due to problems related to uploading client upgrade to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.47 |
vServerClientUpgradeDeliveryClearTrap generated when a previously reported client upgrade collection failure has been corrected and statistics collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.48 |
vServerDCDeliveryFailureTrap generated due to problems related to uploading disconnection logs to the configured FTP server. The trap includes the name of the file which failed to upload, the server to which upload was attempted (ftpHost), the user name used to authenticate with that server (ftpUser), the directory on that server to which the file was to be uploaded (ftpDirectory), the timeout used between attempts to deliver and the number of retries attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.49 |
vServerDCDeliveryClearTrap generated when a previously reported DC log collection failure has been corrected and DC log collection has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.3382.12.1.1.0.50 |
vServerTrapInfoThe types of varbinds send with traps are defined below this point. OBJECT IDENTIFIER .1.3.6.1.4.1.3382.12.1.1.1 |
errorCodeError code associated with the trap.ro Integer32 .1.3.6.1.4.1.3382.12.1.1.1.1 |
filenameFilename associated with the trap.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.2 |
fanA string identifying the failing fan.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.3 |
mCodeMajor code associated with the trap.ro Integer32 .1.3.6.1.4.1.3382.12.1.1.1.4 |
currentValueThe current value of the measure determining the condition.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.5 |
diskDisk associated with trap.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.7 |
powerSupplyLeadPower supply lead associated with trap.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.8 |
systemIdUnique system identifier. Value used currently is MAC address of eth0.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.9 |
temperatureSensorThe name of the temperature sensor. This is used with the vServerTemperatureExceeded trap.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.10 |
trapSeverityThis is a varbind in every Venturi enterprise trap. It indicates the configured severity of the incident being reported.ro Enumeration .1.3.6.1.4.1.3382.12.1.1.1.11 |
ftpHostThe FTP host having a problem with a file upload.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.12 |
ftpUserThe FTP user having a problem with a file upload.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.13 |
ftpDirectoryThe FTP directory having a problem with a file upload.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.14 |
timeoutThe timeout interval in FTP upload configuration.ro Integer32 .1.3.6.1.4.1.3382.12.1.1.1.15 |
retriesThe retries in FTP upload configuration.ro Integer32 .1.3.6.1.4.1.3382.12.1.1.1.16 |
radiusServerThe address or name of the RADIUS server.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.17 |
setThresholdThreshold passed to cause a condition to be set. The condition may be set by a measure falling below this threshold or rising above it. The description of the specific trap will indicate which.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.18 |
clearThresholdThreshold passed to cause a condition to be cleared. The condition may be cleared by a measure falling below this threshold or rising above it. The description of the specific trap will indicate which.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.19 |
highThresholdThreshold passed to cause a condition to be set. High and low thresholds are used for conditions which are set when a measure falls outside of a range considered normal. The normal range is defined to be between the high and low thresholds.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.20 |
lowThresholdThreshold passed to cause a condition to be set. High and low thresholds are used for conditions which are set when a measure falls outside of a range considered normal. The normal range is defined to be between the high and low thresholds.ro OCTET STRING .1.3.6.1.4.1.3382.12.1.1.1.21 |
entityIdThe entityId will be a common value for the set and clear traps anouncing entry to and exit from some condition, possibly an error condition. For set and clear traps, the value of this object will correspond to the vServerConditionType in the vServerConditionTable. For stand-alone traps (those not not associated with the setting or clearing of an error condition) the value of entityId will always be zero.ro Integer32 .1.3.6.1.4.1.3382.12.1.1.1.22 |