VDSL-LINE-EXT-SCM-MIB
The VDSL-LINE-MIB found in RFC 3728 defines objects for the management of a pair of VDSL transceivers at each end of the VDSL line. The VDSL-LINE-MIB configures and monitors the line code independent parameters (TC layer) of the VDSL line. This MIB module is an optional extension of the VDSL-LINE-MIB and defines objects for configuration and monitoring of the line code specific (LCS) elements (PMD layer) for VDSL lines using SCM coding. The objects in this extension MIB MUST NOT be used for VDSL lines using Multiple Carrier Modulation (MCM) line coding. If an object in this extension MIB is referenced by a line which does not use SCM, it has no effect on the operation of that line. Naming Conventions: Vtuc -- VDSL transceiver at near (Central) end of line Vtur -- VDSL transceiver at Remote end of line Vtu -- One of either Vtuc or Vtur Curr -- Current Atn -- Attenuation LCS -- Line Code Specific Max -- Maximum Mgn -- Margin PSD -- Power Spectral Density Rx -- Receive Snr -- Signal to Noise Ratio Tx -- Transmit Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4069: see the RFC itself for full legal notices.
Main OID:
vdslExtSCMMIB.1.3.6.1.2.1.10.228
27
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
vdslExtSCMMIBThe VDSL-LINE-MIB found in RFC 3728 defines objects for the management of a pair of VDSL transceivers at each end of the VDSL line. The VDSL-LINE-MIB configures and monitors the line code independent parameters (TC layer) of the VDSL line. This MIB module is an optional extension of the VDSL-LINE-MIB and defines objects for configuration and monitoring of the line code specific (LCS) elements (PMD layer) for VDSL lines using SCM coding. The objects in this extension MIB MUST NOT be used for VDSL lines using Multiple Carrier Modulation (MCM) line coding. If an object in this extension MIB is referenced by a line which does not use SCM, it has no effect on the operation of that line. Naming Conventions: Vtuc -- VDSL transceiver at near (Central) end of line Vtur -- VDSL transceiver at Remote end of line Vtu -- One of either Vtuc or Vtur Curr -- Current Atn -- Attenuation LCS -- Line Code Specific Max -- Maximum Mgn -- Margin PSD -- Power Spectral Density Rx -- Receive Snr -- Signal to Noise Ratio Tx -- Transmit Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4069: see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.228 |
vdslLineExtSCMMib OBJECT IDENTIFIER .1.3.6.1.2.1.10.228.1 |
vdslLineExtSCMMibObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.228.1.1 |
vdslLineSCMConfProfileBandTableThis table contains transmit band descriptor configuration information for a VDSL line. Each entry in this table reflects the configuration for one of possibly many bands of a single carrier modulation (SCM) VDSL line. For each profile which is associated with a VDSL line using SCM line coding, five entries in this table will exist, one for each of the five bands. Bands which are not in use will be marked as unused. These entries are defined by a manager and can be used to configure the VDSL line. If an entry in this table is referenced by a line which does not use SCM, it has no effect on the operation of that line. SEQUENCE OF VdslLineSCMConfProfileBandEntry .1.3.6.1.2.1.10.228.1.1.1 |
vdslLineSCMConfProfileBandEntryEach entry consists of a list of parameters that represents the configuration of a single carrier modulation VDSL modem transmit band. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. All read-create objects defined in this MIB module SHOULD be stored persistently. VdslLineSCMConfProfileBandEntry .1.3.6.1.2.1.10.228.1.1.1.1 |
vdslLineSCMConfProfileBandIdThe BandId for this entry, which specifies which band is being referred to. VdslSCMBandId .1.3.6.1.2.1.10.228.1.1.1.1.1 |
vdslLineSCMConfProfileBandInUseIndicates whether this band is in use. If set to True this band is in use.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.228.1.1.1.1.2 |
vdslLineSCMConfProfileBandCenterFrequencySpecifies the center frequency in Hzrw Unsigned32 UNITS "Hz" .1.3.6.1.2.1.10.228.1.1.1.1.3 |
vdslLineSCMConfProfileBandSymbolRateThe requested symbol rate in baud.rw Unsigned32 UNITS "baud" .1.3.6.1.2.1.10.228.1.1.1.1.4 |
vdslLineSCMConfProfileBandConstellationSizeSpecifies the constellation size.rw Unsigned32 .1.3.6.1.2.1.10.228.1.1.1.1.5 |
vdslLineSCMConfProfileBandTransmitPSDLevelThe requested transmit power spectral density for the VDSL modem. The Actual value in -0.25 dBm/Hz.rw Unsigned32 UNITS "-0.25 dBm/Hz" .1.3.6.1.2.1.10.228.1.1.1.1.6 |
vdslLineSCMConfProfileBandRowStatusThis object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. None of the columns in this row may be modified while the row is in the `active' state. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `notInService') it must be first unreferenced from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.228.1.1.1.1.7 |
vdslLineSCMPhysBandTableThis table provides one row for each SCM Vtu band. This table is read only as it reflects the current physical parameters of each band. For each ifIndex which is associated with a VDSL line using SCM line coding, five entries in this table will exist, one for each of the five bands. Bands which are not in use will be marked as unused. SEQUENCE OF VdslLineSCMPhysBandEntry .1.3.6.1.2.1.10.228.1.1.2 |
vdslLineSCMPhysBandEntryAn entry in the vdslLineSCMPhysBandTable. VdslLineSCMPhysBandEntry .1.3.6.1.2.1.10.228.1.1.2.1 |
vdslLineSCMPhysBandIdThe BandId for this entry, which specifies which band is being referred to. VdslSCMBandId .1.3.6.1.2.1.10.228.1.1.2.1.1 |
vdslLineSCMPhysBandInUseIndicates whether this band is in use. If set to True this band is in use.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.228.1.1.2.1.2 |
vdslLineSCMPhysBandCurrCenterFrequencyThe current center frequency in Hz for this band.ro Unsigned32 UNITS "Hz" .1.3.6.1.2.1.10.228.1.1.2.1.3 |
vdslLineSCMPhysBandCurrSymbolRateThe current value of the symbol rate in baud for this band.ro Unsigned32 UNITS "baud" .1.3.6.1.2.1.10.228.1.1.2.1.4 |
vdslLineSCMPhysBandCurrConstellationSizeThe current constellation size on this band.ro Unsigned32 .1.3.6.1.2.1.10.228.1.1.2.1.5 |
vdslLineSCMPhysBandCurrPSDLevelThe transmit power spectral density for the VDSL modem.ro Unsigned32 UNITS "- 0.25 dBm/Hz" .1.3.6.1.2.1.10.228.1.1.2.1.6 |
vdslLineSCMPhysBandCurrSnrMgnNoise margin as seen by this Vtu and band with respect to its received signal in 0.25 dB.ro Integer32 UNITS "0.25 dB" .1.3.6.1.2.1.10.228.1.1.2.1.7 |
vdslLineSCMPhysBandCurrAtnMeasured difference in the total power transmitted by the peer Vtu on this band and the total power received by this Vtu on this band in 0.25 dB.ro Unsigned32 .1.3.6.1.2.1.10.228.1.1.2.1.8 |
vdslLineExtSCMConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.228.1.2 |
vdslLineExtSCMGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.228.1.2.1 |
vdslLineExtSCMGroupA collection of objects providing configuration information for a VDSL line based upon single carrier modulation modem. Unknown .1.3.6.1.2.1.10.228.1.2.1.1 |
vdslLineExtSCMCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.228.1.2.2 |
vdslLineExtSCMMibComplianceThe compliance statement for SNMP entities which manage VDSL interfaces. Unknown .1.3.6.1.2.1.10.228.1.2.2.1 |