V-BRIDGE-MIB
Imported Objects
Objects
18 total| Object Name |
|---|
vBridgeMIBThe Bridge MIB Extension module for managing devices that support VLAN Classification by Protocol and Port defined in IEEE 802.1v. MODULE-IDENTITY .1.3.6.1.2.1.17.13 |
vBridgeMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.17.13.1 |
dot1vProtocol OBJECT IDENTIFIER .1.3.6.1.2.1.17.13.1.1 |
dot1vProtocolGroupTableA table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification. SEQUENCE OF Dot1vProtocolGroupEntry .1.3.6.1.2.1.17.13.1.1.1 |
dot1vProtocolGroupEntryA mapping from a Protocol Template to a Protocol Group Identifier. Dot1vProtocolGroupEntry .1.3.6.1.2.1.17.13.1.1.1.1 |
dot1vProtocolTemplateFrameTypeThe data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template. Enumeration .1.3.6.1.2.1.17.13.1.1.1.1.1 |
dot1vProtocolTemplateProtocolValueThe identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 LSAP pair: first octet for DSAP and second octet for SSAP. OCTET STRING .1.3.6.1.2.1.17.13.1.1.1.1.2 |
dot1vProtocolGroupIdRepresents a group of protocols that are associated together when assigning a VID to a frame.rw INTEGER .1.3.6.1.2.1.17.13.1.1.1.1.3 |
dot1vProtocolPortTableA table that contains VID sets used for Port-and-Protocol-based VLAN Classification. SEQUENCE OF Dot1vProtocolPortEntry .1.3.6.1.2.1.17.13.1.1.2 |
dot1vProtocolPortEntryA VID set for a port. Dot1vProtocolPortEntry .1.3.6.1.2.1.17.13.1.1.2.1 |
dot1vProtocolPortGroupIdDesignates a group of protocols in the Protocol Group Database. INTEGER .1.3.6.1.2.1.17.13.1.1.2.1.1 |
dot1vProtocolPortGroupVidThe VID associated with a group of protocols for each port.rw INTEGER .1.3.6.1.2.1.17.13.1.1.2.1.2 |
vBridgeConformance OBJECT IDENTIFIER .1.3.6.1.2.1.17.13.2 |
vBridgeGroups OBJECT IDENTIFIER .1.3.6.1.2.1.17.13.2.1 |
vBridgeDeviceGroupVLAN classification information for the bridge. Unknown .1.3.6.1.2.1.17.13.2.1.1 |
vBridgePortGroupVLAN classification information for individual ports. Unknown .1.3.6.1.2.1.17.13.2.1.2 |
vBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.17.13.2.2 |
vBridgeComplianceThe compliance statement for device support of bridging services. Unknown .1.3.6.1.2.1.17.13.2.2.1 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module