Unisphere-Data-V35-MIB
The Unisphere-Data-V35-MIB module provides management and monitoring capabilities for Unisphere Networks X.21 and V.35 serial server interfaces, exposing counters and status variables for serial line sessions, error rates, and physical layer link states.
Imported Objects
Objects
17 total| Object Name |
|---|
usdV35MIBThe X.21/V.35 Server MIB for the Unisphere Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.59 |
usdV35Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.1 |
usdV35IfTableThis table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Unisphere-Data-HDLC-MIB.usdHdlcIfTable for HDLC interfaces that support X.21/V.35 signalling. SEQUENCE OF UsdV35IfEntry .1.3.6.1.4.1.4874.2.2.59.1.2 |
usdV35IfEntryEach entry describes the characteristics of an X.21/V.35 interface. UsdV35IfEntry .1.3.6.1.4.1.4874.2.2.59.1.2.1 |
usdV35IfIndexThe ifIndex of the X.21/V.35 interface. It has the same value as the usdHdlcIfIndex for the common interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.59.1.2.1.1 |
usdV35IfTypeRead only parameter of interface type X.21/V.35.ro Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.2 |
usdV35IfModeRead only parameter of interface mode of interface X.21/V.35 Data Terminating Equipment(DTE)/Data Communication Equipment(DCE).ro Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.3 |
usdV35IfClockRateThe clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used. The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.rw Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4874.2.2.59.1.2.1.4 |
usdV35IfNrzEncodingThe non-return-to-zero (NRZ) encoding for X.21/V.35 interface. Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (NRZI) encoding.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.5 |
usdV35IfTxClockThere is an option of inverting the transmit clock signal for X.21/V.35 interface. Inverting the tranmit clock is used to compensate for skews between the clock and data when transmitting across long cables at fast data rates.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.6 |
usdV35IfIgnoreDcdWhen in X.21/V.35 DTE mode we have the capability of ignoring the DCD signal in determining whether or not an interface is up.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.7 |
usdV35IfLoopbackLoopback interface is configured (or not) for X.21/V.35 interfacerw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.8 |
usdV35Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4 |
usdV35Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4.1 |
usdV35ComplianceThe compliance statement for entities that implement the Unisphere X.21/V.35 MIB. Unknown .1.3.6.1.4.1.4874.2.2.59.4.1.1 |
usdV35Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4.2 |
usdV35GroupA collection of objects providing management of X.21/V.35 interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.59.4.2.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module