Unisphere-Data-SUBSCRIBER-MIB
The Unisphere-Data-SUBSCRIBER-MIB facilitates the monitoring and management of subscriber session states, authentication status, and traffic statistics for Unisphere Networks enterprise devices. It provides specific OID access to track active user counts, session durations, and bandwidth utilization per subscriber within the network infrastructure.
Imported Objects
Objects
21 total| Object Name |
|---|
usdSubscriberMIBThe Subscriber MIB for the Unisphere Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.49 |
usdSubscrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.1 |
usdSubscrLocal OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.1.1 |
usdSubscrLocalTablePermits local configuration associating a remote subscriber's identity with a local interface, for use in circumstances where the remote subscriber's identity cannot be queried directly (e.g. dynamic IPoA operation). SEQUENCE OF UsdSubscrLocalEntry .1.3.6.1.4.1.4874.2.2.49.1.1.1 |
usdSubscrLocalEntryLocal configuration associating a remote subscriber's identity with a local interface. UsdSubscrLocalEntry .1.3.6.1.4.1.4874.2.2.49.1.1.1.1 |
usdSubscrLocalIfIndexThe ifIndex of the interface to which this subscriber information applies. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.1 |
usdSubscrLocalEncapsThe incoming data encapsulation to which this subscriber information applies. An interface may have a unique subscriber identity configured for each incoming data encapsulation it supports. UsdSubscrEncaps .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.2 |
usdSubscrLocalControlWhen set to clear(1), causes the subscriber information in this entry to be cleared. When set to ok(0), there is no effect and subscriber information is unchanged. When read, always returns a value of ok(0). No other object in this entry can be set simultaneously, otherwise an InconsistentValue error is reported.rw Enumeration .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.3 |
usdSubscrLocalNamePrefixIf enabled, indicates whether the value of usdSubscrLocalName is a prefix rather than a full name.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.4 |
usdSubscrLocalNameThe subscriber's name. If usdSubscrLocalNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5 |
usdSubscrLocalPasswordPrefixIf enabled, indicates whether the value of usdSubscrLocalPassword prefix rather than a full password.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.6 |
usdSubscrLocalPasswordThe subscriber's password. If usdSubscrLocalPasswordPrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber password. The full password is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.7 |
usdSubscrLocalDomainThe subscriber's domain.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.8 |
usdSubscrLocalAuthenticationWhen enabled, the interface performs authentication with RADIUS server using the configured subscriber information and associated with the incoming data encapsulation (usdSubscriberLocalEncaps).rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.9 |
usdSubscriberMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4 |
usdSubscriberMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4.1 |
usdSubscriberComplianceObsolete compliance statement for systems supporting subscriber operation. This statement became obsolete when local authentication support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.49.4.1.1 |
usdSubscriberCompliance2The compliance statement for systems supporting subscriber operation. Unknown .1.3.6.1.4.1.4874.2.2.49.4.1.2 |
usdSubscriberMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4.2 |
usdSubscriberLocalGroupObsolete basic collection of objects providing management of locally-configured subscriber identities in a Unisphere product. This group became obsolete when local authentication support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.49.4.2.1 |
usdSubscriberLocalGroup2The basic collection of objects providing management of locally-configured subscriber identities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.49.4.2.2 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module