Unisphere-Data-SLEP-MIB
AI MIB Summary
The Unisphere-Data-SLEP-MIB enables monitoring and management of Serial Line Encapsulation Protocol (SLEP) session states, link statistics, and encapsulation parameters on Unisphere Networks Inc. storage and networking appliances. This module provides specific counters and gauges for tracking serial interface throughput, error rates, and protocol negotiation status within the vendor's enterprise infrastructure.
The Serial Line Encapulation Protocol (SLEP) MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdSlepMIBS.1.3.6.1.4.1.4874.2.2.15
24
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
usdSlepMIBSThe Serial Line Encapulation Protocol (SLEP) MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.15 |
usdSlepObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.15.1 |
usdSlepIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.15.1.1 |
usdSlepNextIfIndexCoordinate ifIndex value allocation for entries in usdSlepIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.15.1.1.1 |
usdSlepIfTableThe parameters for the SLEP service on this interface. SEQUENCE OF UsdSlepIfEntry .1.3.6.1.4.1.4874.2.2.15.1.1.2 |
usdSlepIfEntryThe Parameters for a particular SLEP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable UsdSlepIfEntry .1.3.6.1.4.1.4874.2.2.15.1.1.2.1 |
usdSlepIfIndexThe ifIndex value of the corresponding ifEntry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1 |
usdSlepKeepAliveTimerThe interface keep alive timer for this entry. The time in seconds that this entity will wait for sending a keep-alive-message to the remote SLEP entity, and the time in seconds that this entity will wait for the reception of a keep-alive-message from the remote SLEP entity.rw INTEGER .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2 |
usdSlepIfLowerIfIndexThe ifIndex of an interface over which this SLEP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3 |
usdSlepIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdSlepIfRowStatus usdSlepIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdSlepIfIndex must have been determined previously, by reading usdSlepNextIfIndex. The interface identified by usdSlepIfLowerIfIndex must exist, and must be an interface type that permits layering of SLEP Interface above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4 |
usdSlepDownWhenLoopedThe down-when-looped control for this entry. This attribute determines if loop detection is enabled for the interface. If set to disable, loop detection is disabled for the interface.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5 |
usdSlepIfStatisticsTableThe statistics for the SLEP service on this interface. SEQUENCE OF UsdSlepIfStatisticsEntry .1.3.6.1.4.1.4874.2.2.15.1.1.3 |
usdSlepIfStatisticsEntryThe statistics for a particular SLEP interface. UsdSlepIfStatisticsEntry .1.3.6.1.4.1.4874.2.2.15.1.1.3.1 |
usdSlepIfStatsIndexThe ifIndex value of that identifies this entry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1 |
usdSlepKeepAliveFailuresThe number of link drops due to keep-alive failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2 |
usdSlepLinkStatusTooLongPacketsThe number of packets that were too long for this SLEP entity.ro Counter32 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3 |
usdSlepLinkStatusBadFCSsThe number of FCS's errors for this SLEP entity.ro Counter32 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4 |
usdSlepConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.15.4 |
usdSlepCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.15.4.1 |
usdSlepComplianceObsolete compliance statement for entities which implement the Unisphere SLEP MIB. This compliance statement became obsolete when the usdSlepDownWhenLooped object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.15.4.1.1 |
usdSlepCompliance2The compliance statement for entities which implement the Unisphere SLEP MIB. Unknown .1.3.6.1.4.1.4874.2.2.15.4.1.2 |
usdSlepGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.15.4.2 |
usdSlepGroupObsolete collection of objects providing management of SLEP interfaces in a Unisphere product. This group became obsolete when the usdSlepDownWhenLooped object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.15.4.2.1 |
usdSlepGroup2A collection of objects providing management of SLEP interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.15.4.2.2 |