Unisphere-Data-PIM-MIB
AI MIB Summary
The Unisphere-Data-PIM-MIB enables monitoring and management of PIM (Protocol Independent Multicast) routing instances on Dell EMC Unisphere Data platforms, exposing metrics such as neighbor adjacencies, multicast group states, and interface participation counters. This module facilitates the tracking of PIM-SM and PIM-DM operational status, including join/prune message statistics and source-specific multicast (SSM) tree health.
The enterprise MIB module for management of PIM routers.
Main OID:
usdPimMIB.1.3.6.1.4.1.4874.2.2.43
151
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
151 total| Object Name |
|---|
usdPimMIBThe enterprise MIB module for management of PIM routers. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.43 |
usdPimMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1 |
usdPimTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1.0 |
usdPimGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1.1 |
usdPimNumHelloRcvdTotal number of Hellos received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.1 |
usdPimNumJoinPruneRcvdTotal number of JoinPrunes received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.2 |
usdPimNumAssertRcvdTotal number of Asserts received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.3 |
usdPimNumGraftRcvdTotal number of Grafts received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.4 |
usdPimNumGraftAckRcvdTotal number of Graft Acks received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.5 |
usdPimNumHelloSentTotal number of Hellos sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.6 |
usdPimNumJoinPruneSentTotal number of JoinPrunes sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.7 |
usdPimNumAssertSentTotal number of Asserts sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.8 |
usdPimNumGraftSentTotal number of Grafts sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.9 |
usdPimNumGraftAckSentTotal number of Graft Acks sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.10 |
usdPimInterfaceTableThe (conceptual) table listing enterprise specific information on a subset of the rows of the pimInterfaceTable defined in the standard PIM MIB. SEQUENCE OF UsdPimInterfaceEntry .1.3.6.1.4.1.4874.2.2.43.1.1.11 |
usdPimInterfaceEntryAn entry (conceptual row) in the usdPimInterfaceTable. There is one entry per entry in the pimInterfaceTable. UsdPimInterfaceEntry .1.3.6.1.4.1.4874.2.2.43.1.1.11.1 |
usdPimIntfNumHelloRcvdTotal number of Hellos received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1 |
usdPimIntfNumJoinPruneRcvdTotal number of JoinPrunes received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2 |
usdPimIntfNumAssertRcvdTotal number of Asserts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3 |
usdPimIntfNumGraftRcvdTotal number of Grafts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4 |
usdPimIntfNumGraftAckRcvdTotal number of Graft Acks received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5 |
usdPimIntfNumHelloSentTotal number of Hellos sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6 |
usdPimIntfNumJoinPruneSentTotal number of JoinPrunes sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7 |
usdPimIntfNumAssertSentTotal number of Asserts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8 |
usdPimIntfNumGraftSentTotal number of Grafts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9 |
usdPimIntfNumGraftAckSentTotal number of Graft Acks sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10 |
usdPimIntfVersionThe version of PIM running on this interface.ro INTEGER .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11 |
usdPimIntfNumNbrsNumber of PIM neighbors detected on this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12 |
usdPimMRouteTableThe (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> states. SEQUENCE OF UsdPimMRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.12 |
usdPimMRouteEntryAn entry (conceptual row) in the usdPimMRouteTable. UsdPimMRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.12.1 |
usdPimMRouteGroupThe group address. Specified as 224.0.0.0 for <*, *, RP> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1 |
usdPimMRouteSourceThe source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2 |
usdPimMRouteSourceMaskThe source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3 |
usdPimMRouteRPAddressThe RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4 |
usdPimMRouteUpstreamAssertTimerThe time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5 |
usdPimMRouteAssertMetricThe metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6 |
usdPimMRouteAssertPrefThe preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7 |
usdPimMRouteAssertRPTBitThe value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8 |
usdPimMRouteBitsThis object describes whether the entry is on shared tree (rpt) or shortest path tree (spt).ro Bits .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9 |
usdPimMRouteRPAddrInUseThe RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries. Set to 0.0.0.0 for <S, G> entries on shortest path tree.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10 |
usdPimMRouteUpstreamNbrThe address of upstream neighbor being used for the entry. Its set to 0.0.0.0 if the router is directly attached to source on one of its interface.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11 |
usdPimMRouteIifAddrThe address of incoming interface for this entry.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12 |
usdPimMRouteIsWaitingToSwitchToSPTThis object describes whether the entry is still waiting to switch completely to shortest path tree in case of <S, G> entries. It waits to do this till it receives first packet from incoming interface towards shortest path tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13 |
usdPimMRouteEntryExpiryTimerThe time after which the entry timer expires for this entry. Set to 0 if entry timer is not active.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14 |
usdPimMRouteSenderDRAddrThe address of the designated router on the sender's subnet in case of <S, G> entries. The sender designated router register encapsulates data to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15 |
usdPimMRouteRouteAddrThe address of the route being used to do RPF check for this entry. It is set to 0.0.0.0 (with usdPimMRouteRouteMask set to 255.255.255.255) if there is no route available.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16 |
usdPimMRouteRouteMaskThe mask of the route being used to do RPF check for this entry. It is set to 255.255.255.255 (with usdPimMRouteRoute set to 0.0.0.0) if there is no route available.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17 |
usdPimMRouteGRPAddrThe address of the group-to-RP mapping being used to get the RP for this entry. It is set to 0.0.0.0 (with usdPimMRouteGRPMask set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18 |
usdPimMRouteGRPMaskThe mask of the group-to-RP mapping being used to get the RP for this entry. It is set to 255.255.255.255 (with usdPimMRouteGRPAddr set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19 |
usdPimMRouteOtherProtoOifJoinTypeAllThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving all data. This will be particularly true for dense mode protocols which would want all data (<*, *>) from PIM sparse mode protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20 |
usdPimMRouteOtherProtoOifJoinTypeGThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given group. This will be particularly true for IGMP which would want data for a given group (<*, G>) from PIM protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21 |
usdPimMRouteOtherProtoOifJoinTypeSGThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given <source, group>. This will be particularly true for IGMPv3 which would want data for a given <source, group (<S, G>) from PIM sparse-mode protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22 |
usdPimMRoutePimTypeThis object indicates if the owner of this entry is Sparse mode or Dense mode PIM. Owner is usually determined by the protocol running on the incoming interface of the entry. In case sparse-dense mode PIM is running on the incoming interface, sparse-mode is the owner if RP for the group is known, else dense mode is the owner.ro UsdPimType .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23 |
usdPimMRouteNextHopTableThe (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces. SEQUENCE OF UsdPimMRouteNextHopEntry .1.3.6.1.4.1.4874.2.2.43.1.1.13 |
usdPimMRouteNextHopEntryAn entry (conceptual row) in the usdPimMRouteNextHopTable. UsdPimMRouteNextHopEntry .1.3.6.1.4.1.4874.2.2.43.1.1.13.1 |
usdPimMRouteNextHopGroupAddrThe group address. Specified as 224.0.0.0 for <*, *, RP> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2 |
usdPimMRouteNextHopSrcAddrThe source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3 |
usdPimMRouteNextHopSrcMaskThe source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4 |
usdPimMRouteNextHopRPAddrThe RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5 |
usdPimMRouteNextHopIfIdThe interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the source subnet to send PIM register encapsulated data (as unicast) to RP. It is also used by PIM boundary routers (PMBRs) to register data to RP. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6 |
usdPimMRouteNextHopAddressThis object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register interface i.e. usdPimMRouteNextHopIfId object is set to 0. It should be set to the address of neighbor in case the interface is an NBMA interface. In all other cases it should be set to the group address itself. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7 |
usdPimMRouteNextHopPruneReasonThis object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.ro Enumeration .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8 |
usdPimMRouteNextHopJoinTypeSSRPThis object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing interface from corresponding <*, *, RP> entry in case of <*, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9 |
usdPimMRouteNextHopJoinTypeGThis object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface from corresponding <*, G> entry in case of <S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10 |
usdPimMRouteNextHopJoinTypeSGThis object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11 |
usdPimMRouteNextHopHasLGMThis object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12 |
usdPimMRouteNextHopHasOifAWThis object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13 |
usdPimMRouteNextHopHasOifSendAssertThis object indicates whether or not this interface is going to send an assert at the end of assert suppression interval. Assert suppression is used to prevent a flood of assert to be generated in response to data or other asserts.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14 |
usdPimMRouteNextHopHasOifRegisterThis object indicates whether or not this next hop is a register outgoing interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15 |
usdPimMRouteNextHopHasOifBorderBitThis object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16 |
usdPimMRouteNextHopHasOifNullEncapsBitThis object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17 |
usdPimMRouteNextHopJoinEndTimerThis object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry indicates when the <S, G> join expires, for a <*, G> entry indicates when the <*, G> join expires and for a <*, *, RP> entry indicates when the <*, *, RP> join expires. Inherited joins (like <S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>) expire when the corresponding parent join expires.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18 |
usdPimMRouteNextHopAssertEndTimerThis object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19 |
usdPimMRouteNextHopNextAssertTimerThis object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20 |
usdPimMRouteNextHopAssertSrcAddressThis object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> entries it is the address of the source S itself. For <*, G> entries it is the address of the source whose data was forwarded using this <*, G> and caused the assert situation to happen.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21 |
usdPimMRouteNextHopRegisterSuppressionTimerThis object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on the register outgoing interface as a result of receiving register-stop from the RP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22 |
usdPimMRouteNextHopPimTypeThis object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM.ro UsdPimType .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23 |
usdPimMRouteNextHopPruneTimeLeftThis object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by dense-mode PIM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24 |
usdPimMRouteNextHopsendingIpAddressThis object describes the source IP address used by this interface to send PIM packets out on this outgoing interface.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25 |
usdPimRPSetTableThe (conceptual) table listing enterprise specific information on a subset of the rows of the pimRPSetTable defined in the standard PIM MIB. SEQUENCE OF UsdPimRPSetEntry .1.3.6.1.4.1.4874.2.2.43.1.1.14 |
usdPimRPSetEntryAn entry (conceptual row) in the usdPimRPSetTable. UsdPimRPSetEntry .1.3.6.1.4.1.4874.2.2.43.1.1.14.1 |
usdPimRPSetPriorityThis object describes the priority of the RP for this group-to-RP mapping.ro Integer32 (1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1 |
usdPimRPSetTypeInfoThis object describes the mechanism by which this group to RP mapping has been learnt, i.e. whether its statically configured, AutoRP learnt or BSR learnt. It also indicates whether the mapping is positive or negative. Negative mappings force the groups in that range to fall into dense-mode category if sparse-dense mode is configured or no RP if its purely sparse mode configuration.ro Enumeration .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2 |
usdPimRPSetAccessListNameThis object lists the name of the access list from which this group-to-RP mapping was picked up in case of statically configured RPs.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3 |
usdPimStaticRPConfTableThe (conceptual) table listing statically configured PIM RPs. SEQUENCE OF UsdPimStaticRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.15 |
usdPimStaticRPConfEntryAn entry (conceptual row) in the usdPimStaticRPConfTable. UsdPimStaticRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.15.1 |
usdPimStaticRPConfComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1 |
usdPimStaticRPConfRPAddrIp address of the RP which for the group-to-RP mapping being configured. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2 |
usdPimStaticRPConfAccessListNameName of the access list from which group-ranges are picked up for this group-ro-RP mapping. Every deny component in the list is added as negative group-ro-RP mapping. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3 |
usdPimStaticRPConfRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4 |
usdPimStaticRPConfOverrideThe object indicates whether or not this statically configured group-to-RP mapping should override the group-to-RP mapping learnt via AutoRP for the component group-ranges in the access list. By default AutoRP learnt group-to-RP mappings are preferred over statically configured ones. While setting the rowStatus to create a static RP, this field should be assigned to true if the override property is desired.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5 |
usdPimAutoRPConfTableThe (conceptual) table allowing AutoRP configuration of candidate RPs (advertisement agents). SEQUENCE OF UsdPimAutoRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.16 |
usdPimAutoRPConfEntryAn entry (conceptual row) in the usdPimAutoRPConfTable. UsdPimAutoRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.16.1 |
usdPimAutoRPConfComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1 |
usdPimAutoRPConfCandRPAddrThe IP address of the candidate RP for this advertising agent configuration. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2 |
usdPimAutoRPConfGroupAccessListNameThe access list name from which group ranges are picked up for advertising agent configuration. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3 |
usdPimAutoRPConfRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4 |
usdPimAutoRPConfTTLThe time-to-live value used while sending AutoRP advertisement out for this group-to-RP mappings created as a result of this configuration. This should be set along with usdPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the TTL value to be used.rw Integer32(1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5 |
usdPimAutoRPConfAncmntIntvlThe time interval at which AutoRP advertisements are sent out for the group-to-RP mappings created as a result of this configuration. This should be set along with usdPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the announcement interval to be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6 |
usdPimAutoRPConfifIdThe interface index of the interface for the candidate RP if an interface with that address exists else it is set to 0.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7 |
usdPimAutoRPCandTableThe (conceptual) table listing AutoRP candidate RPS (advertising agents). SEQUENCE OF UsdPimAutoRPCandEntry .1.3.6.1.4.1.4874.2.2.43.1.1.17 |
usdPimAutoRPCandEntryAn entry (conceptual row) in the usdPimAutoRPCandTable. UsdPimAutoRPCandEntry .1.3.6.1.4.1.4874.2.2.43.1.1.17.1 |
usdPimAutoRPCandComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1 |
usdPimAutoRPCandRPAddrThe IP address of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2 |
usdPimAutoRPCandGroupAddrThe group address of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3 |
usdPimAutoRPCandGroupMaskThe group mask of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4 |
usdPimAutoRPCandRowStatusThe current status of this row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5 |
usdPimAutoRPCandAccessListNameThe name of the group list using which this AutoRP group-to-RP candidate RP mapping was configured.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6 |
usdPimAutoRPCandAutoRPTTLThe time-to-live value used while sending AutoRP advertisement out for this group-to-RP mapping.ro Integer32(1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7 |
usdPimAutoRPCandAutoRPAncmntIntvlThe time interval at which AutoRP advertisements are sent out for this group-to-RP mapping.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8 |
usdPimAutoRPCandIfIdThe interface index of the interface for this AutoRP group-to-RP candidate RP mapping if an interface for RP address exists else it is set to 0.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9 |
usdPimComponentTableThe (conceptual) table listing each component (domain) in PIM. SEQUENCE OF UsdPimComponentEntry .1.3.6.1.4.1.4874.2.2.43.1.1.18 |
usdPimComponentEntryAn entry (conceptual row) in the usdPimComponentTable. UsdPimComponentEntry .1.3.6.1.4.1.4874.2.2.43.1.1.18.1 |
usdPimComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1 |
usdPimComponentAutoRPMappingAgentRowStatusThe status of AutoRP mapping agent by which this router can be made an AutoRP mapping agent or removed from being an AutoRP mapping agent in this component.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2 |
usdPimComponentConfiguredAutoRPMappingAgentIfIdThe interface index of the interface which mapping agent should use to send AutoRP mapping messages. If not specified, the interface with highest IP address in this domain is picked up for this purpose.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3 |
usdPimComponentAutoRPMappingAgentIntervalThe time interval at which AutoRP mapping messages are sent out in this component. The default value is 60 seconds.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4 |
usdPimComponentAutoRPMappingTTLThe time-to-live value used while sending AutoRP mapping messages out in this component.rw Integer32(1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5 |
usdPimComponentAutoRPMappingAgentIntfAddrThe IP address of the interface which mapping agent is using to send AutoRP mapping messages.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6 |
usdPimComponentAutoRPMappingAgentWinnerAddrThe IP address of the winner AutoRP mapping agent. There can be multiple mapping agents configured in a given PIM domain(component). The mapping agent with highest IP address is chosen as the winner and it continues to send AutoRP mapping messages. If the router itself is the winner, then this is set to 0.0.0.0.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7 |
usdPimComponentAutoRPMappingAgentWinnerLastHeardThe time (in seconds) that has past since an AutoRP mapping message was receieved from the winner AutoRP mapping agent. If the router itself is the winner, then this is set to 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8 |
usdPimUnicastRouteTableThe (conceptual) table listing all the unicast routes currently in use by PIM for diong RPF checking. SEQUENCE OF UsdPimUnicastRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.19 |
usdPimUnicastRouteEntryAn entry (conceptual row) in the usdPimUnicastRouteTable. UsdPimUnicastRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.19.1 |
usdPimUnicastRouteEntryAddrThe address of route in use. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1 |
usdPimUnicastRouteEntryMaskThe mask of route in use. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2 |
usdPimUnicastRouteEntryRpfNbrThe RPF neighbor (next-hop) to reach the route of this entry. It is set to 0.0.0.0 for directly connected routes.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3 |
usdPimUnicastRouteEntryIifIdThe interface index (next-hop) to reach the route of this entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4 |
usdPimUnicastRouteEntryIifAddrThe interface address (next-hop) to reach the route of this entry.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5 |
usdPimUnicastRouteEntryPrefThe preference of the route of this entry.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6 |
usdPimUnicastRouteEntryMetricThe metric of the route of this entry.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7 |
usdPimUnicastRouteEntryPimTypeThis object indicates whether the route specified in this entry is being used by sparse-mode and/or dense-mode PIM.ro UsdPimType .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8 |
usdPimSPTThresholdTableThe (conceptual) table listing threshold values set for switching from shared tree to shortest path tree and vice versa for data forwarded by PIM sparse-mode. SEQUENCE OF UsdPimSPTThresholdEntry .1.3.6.1.4.1.4874.2.2.43.1.1.20 |
usdPimSPTThresholdEntryAn entry (conceptual row) in the usdPimSPTThresholdTable. UsdPimSPTThresholdEntry .1.3.6.1.4.1.4874.2.2.43.1.1.20.1 |
usdPimSPTThresholdAccessListNameThe name of the access list from which group ranges are picked up for setting SPT threshold in this entry. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1 |
usdPimSPTThresHoldRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2 |
usdPimSPTThresholdKbpsThe value of SPT threshold in kilobits per second. Default value is 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3 |
usdPimConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2 |
usdPimCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2.1 |
usdPimComplianceThe compliance statement for entities which implement the Unisphere PIM MIB. Unknown .1.3.6.1.4.1.4874.2.2.43.2.1.1 |
usdPimGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2.2 |
usdPimGeneralGroupA collection of objects for managing general PIM capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.1 |
usdPimInterfaceGroupA collection of objects for managing PIM interface capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.2 |
usdPimMRouteConfGroupA collection of objects for managing PIM multicast route capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.3 |
usdPimMRouteNextHopGroupA collection of objects for managing PIM multicast route next hop capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.4 |
usdPimRPSetGroupA collection of objects for managing PIM RP-Set capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.5 |
usdPimStaticRPConfGroupA collection of objects for managing statically configured PIM RPs capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.6 |
usdPimAutoRPConfGroupA collection of objects for managing PIM AutoRP candidate advertisment agent RP capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.7 |
usdPimAutoRPCandGroupA collection of objects for managing PIM AutoRP candidate advertising agent RP capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.8 |
usdPimComponentGroupA collection of objects for managing PIM component (domain) capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.9 |
usdPimUnicastRouteGroupA collection of objects for managing PIM unicast route capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.10 |
usdPimSPTThresholdGroupA collection of objects for managing PIM shortest path tree threshold capabilities in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.11 |