Unisphere-Data-OSPF-MIB
AI MIB Summary
The Unisphere-Data-OSPF-MIB enables monitoring and management of Open Shortest Path First (OSPF) routing protocol states, neighbor adjacencies, and link-state database statistics on Unisphere Networks Inc. hardware. It provides access to standard OSPF counters and variables, including interface metrics, router IDs, and adjacency transitions, for troubleshooting and performance analysis within the Unisphere management environment.
The OSPF Protocol MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdOspfMIB.1.3.6.1.4.1.4874.2.2.14
92
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
usdOspfMIBThe OSPF Protocol MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.14 |
usdOspfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.1 |
usdOspfGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.1.1 |
usdOspfProcessIdAn identifier having special semantics when set.
When this object's value is zero, OSPF is disabled and cannot be
configured. Setting this object to a nonzero value enables OSPF
operation and permits further OSPF configuration to be performed.
Once set to a nonzero value, this object cannot be modified.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.1 |
usdOspfMaxPathSplitsThe maximum number of equal-cost routes that will be maintained by the
OSPF protocol.
A change in this value will be taken into account at the next
shortest-path-first recalculation.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.2 |
usdOspfSpfHoldIntervalThe minimum amount of time that must elapse between shortest-path-first
recalculations.
Reducing this value can cause an immediate SPF recalulation if the new
value is less than the current value of usdOspfSpfHoldTimeRemaining and
other SPF-inducing protocol events have occurred.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.3 |
usdOspfNumActiveAreasThe number of active areas.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.4 |
usdOspfSpfTimeThe SPF schedule delay.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.5 |
usdOspfRefBwThe reference bandwith, in bits per second. This object is used when
OSPF automatic interface cost calculation is used.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.6 |
usdOspfAutoVlinkSet this object to true(1) in order to have virtual links automatically
configured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.1.7 |
usdOspfIntraDistanceDefault distance for intra-area routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.8 |
usdOspfInterDistanceDefault distance for inter-area routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.9 |
usdOspfExtDistanceDefault distance for external type 5 and type 7 routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.10 |
usdOspfHelloPktsRcvNumber of hello packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.11 |
usdOspfDDPktsRcvNumber of database description packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.12 |
usdOspfLsrPktsRcvNumber of link state request packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.13 |
usdOspfLsuPktsRcvNumber of link state update packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.14 |
usdOspfLsAckPktsRcvNumber of link state ACK packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.15 |
usdOspfTotalRcvNumber of OSPF packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.16 |
usdOspfLsaDiscardCntNumber of LSA packets discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.17 |
usdOspfHelloPktsSentNumber of hello packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.18 |
usdOspfDDPktsSentNumber of database description packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.19 |
usdOspfLsrPktsSentNumber of link state request packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.20 |
usdOspfLsuPktsSentNumber of link state update packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.21 |
usdOspfLsAckPktsSentNumber of link state ACK packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.22 |
usdOspfErrPktsSentNumber of packets dropped.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.23 |
usdOspfTotalSentNumber of OSPF packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.24 |
usdOspfCsumErrPktsNumber of packets received with a checksum error.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.25 |
usdOspfAllocFailNbrNumber of neighbor allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.26 |
usdOspfAllocFailLsaNumber of LSA allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.27 |
usdOspfAllocFailLsdNumber of LSA HDR allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.28 |
usdOspfAllocFailDbRequestNumber of database request allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.29 |
usdOspfAllocFailRtxNumber of RTX allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.30 |
usdOspfAllocFailAckNumber of LS ACK allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.31 |
usdOspfAllocFailDbPktNumber of DD packet allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.32 |
usdOspfAllocFailCircNumber of OSPF interface allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.33 |
usdOspfAllocFailPktNumber of OSPF general packet allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.34 |
usdOspfOperStateA flag to note whether this router is operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.1.35 |
usdOspfVpnRouteTagVPN route tag value.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.36 |
usdOspfDomainIdOSPF domain ID.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.37 |
usdOspfMplsTeRtrIdIfIndexConfigure the stable router interface id to designate it as TE
capable.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.14.1.1.38 |
usdOspfAreaTableThe Unisphere OSPF area table describes the OSPF-specific
characteristics of areas. SEQUENCE OF UsdOspfAreaEntry .1.3.6.1.4.1.4874.2.2.14.1.2 |
usdOspfAreaEntryThe OSPF area entry describes OSPF-specific characteristics of one
area. UsdOspfAreaEntry .1.3.6.1.4.1.4874.2.2.14.1.2.1 |
usdOspfAreaTypeThe type of this area.ro Enumeration .1.3.6.1.4.1.4874.2.2.14.1.2.1.1 |
usdOspfAreaTeCapableConfigure the specified area TE capable to flood the TE information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.2.1.2 |
usdOspfIfTableThe Unisphere OSPF interface table describes the OSPF-specific
characteristics of interfaces. SEQUENCE OF UsdOspfIfEntry .1.3.6.1.4.1.4874.2.2.14.1.7 |
usdOspfIfEntryThe OSPF interface entry describes OSPF-specific characteristics of one
interface. UsdOspfIfEntry .1.3.6.1.4.1.4874.2.2.14.1.7.1 |
usdOspfIfCostThe cost value for this interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.1 |
usdOspfIfMaskThe mask used to derive the network range of this interface.rw IpAddress .1.3.6.1.4.1.4874.2.2.14.1.7.1.2 |
usdOspfIfPassiveFlagFlag to indicate whether routing updates should be suppressed on this
interface. To actively perform routing updates, set this object to
disabled(0).rw Enumeration .1.3.6.1.4.1.4874.2.2.14.1.7.1.3 |
usdOspfIfNbrCountNumber of OSPF neighbors from this interface.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.4 |
usdOspfIfAdjNbrCountNumber of OSPF adjacent neighbors from this interface.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.5 |
usdOspfIfMd5AuthKeyThe MD5 authentication key. When setting this object, the
usdOspfIfMd5AuthKeyId must be specified on the same PDU. For simple
text authentication type, use ospfIfAuthKey. Setting this object will
have the side effect of adding or updating the correspondent entry in
usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such value
will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.7.1.6 |
usdOspfIfMd5AuthKeyIdThe MD5 authentication key ID. When setting this object,
usdOspfIfMd5AuthKey must be specified on the same PDU.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.7 |
usdOspfVirtIfTableThe Unisphere OSPF virtual interface table describes the OSPF-specific
characteristics of virtual interfaces. SEQUENCE OF UsdOspfVirtIfEntry .1.3.6.1.4.1.4874.2.2.14.1.9 |
usdOspfVirtIfEntryThe OSPF virtual interface entry describes OSPF-specific
characteristics of one virtual interface. UsdOspfVirtIfEntry .1.3.6.1.4.1.4874.2.2.14.1.9.1 |
usdOspfVirtIfMd5AuthKeyThe MD5 authentication key. When setting this object, the
usdOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple
text authentication type, use ospfVirtIfAuthKey. Setting this object
will have the side effect of adding or updating the correspondent entry
in usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.9.1.1 |
usdOspfVirtIfMd5AuthKeyIdThe MD5 authentication key id. When setting this object,
usdOspfVirtIfMd5AuthKey must be specified on the same psu.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.9.1.2 |
usdOspfNbrTableThe Unisphere OSPF neighbor table describes the OSPF-specific
characteristics of neighbors. SEQUENCE OF UsdOspfNbrEntry .1.3.6.1.4.1.4874.2.2.14.1.10 |
usdOspfNbrEntryThe OSPF neighbor entry describes OSPF-specific characteristics of one
neighbor. UsdOspfNbrEntry .1.3.6.1.4.1.4874.2.2.14.1.10.1 |
usdOspfNbrLocalIpAddrThe local IP address on this OSPF circuit.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.1 |
usdOspfNbrDRThe neighbor's idea of designated router.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.2 |
usdOspfNbrBDRThe neighbor's idea of backup designated router.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.3 |
usdOspfSummImportTableThe Unisphere OSPF summary import table describes the OSPF-specific
characteristics of network aggregation into the OSPF autonomous system.
With this table, the load of advertising many external routes can be
reduced by specifying a range which includes some or all of the external
routes. SEQUENCE OF UsdOspfSummImportEntry .1.3.6.1.4.1.4874.2.2.14.1.15 |
usdOspfSummImportEntryThe OSPF summary import entry describes OSPF-specific characteristics
of one summary report. UsdOspfSummImportEntry .1.3.6.1.4.1.4874.2.2.14.1.15.1 |
usdOspfSummAggNetThe summary address for a range of addresses.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.15.1.1 |
usdOspfSummAggMaskThe subnet mask used for the summary route.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.15.1.2 |
usdOspfSummAdminStatThe admin status of this summary aggregation.rw Enumeration .1.3.6.1.4.1.4874.2.2.14.1.15.1.3 |
usdOspfSummRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.15.1.4 |
usdOspfMd5IntfTableThe Unisphere OSPF interface MD5 key table describes OSPF-specific
characteristics of the MD5 authentication key for the OSPF interfaces.
This table is not to be used for the simple password authentication. SEQUENCE OF UsdOspfMd5IntfEntry .1.3.6.1.4.1.4874.2.2.14.1.16 |
usdOspfMd5IntfEntryThe OSPF interface MD5 key entry describes OSPF-specific
characteristics of one MD5 authentication's interface. UsdOspfMd5IntfEntry .1.3.6.1.4.1.4874.2.2.14.1.16.1 |
usdOspfMd5IntfKeyIdThe OSPF interface this key belongs to.ro Integer32 .1.3.6.1.4.1.4874.2.2.14.1.16.1.1 |
usdOspfMd5IntfKeyActiveSet this object to true(1) in order to have this key active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.16.1.2 |
usdOspfMd5IntfAuthKeyThe MD5 authentication key. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.16.1.3 |
usdOspfMd5IntfRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.16.1.4 |
usdOspfMd5VirtIntfTableThe Unisphere OSPF interface MD5 key table describes OSPF-specific
characteristics of the MD5 authentication key for the OSPF interfaces.
This table is not to be used for the simple password authentication. SEQUENCE OF UsdOspfMd5VirtIntfEntry .1.3.6.1.4.1.4874.2.2.14.1.17 |
usdOspfMd5VirtIntfEntryThe OSPF Interface MD5 Key entry describes OSPF-specific
characteristics of one MD5 authentication's interface. UsdOspfMd5VirtIntfEntry .1.3.6.1.4.1.4874.2.2.14.1.17.1 |
usdOspfMd5VirtIntfAreaIdThe OSPF area ID this key belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.17.1.1 |
usdOspfMd5VirtIntfNeighborThe OSPF neightbor this key belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.17.1.2 |
usdOspfMd5VirtIntfKeyIdThe OSPF virtual interface this key belongs to.ro Integer32 .1.3.6.1.4.1.4874.2.2.14.1.17.1.3 |
usdOspfMd5VirtIntfKeyActiveSet this object to true(1) in order to have this key active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.17.1.4 |
usdOspfMd5VirtIntfAuthKeyThe MD5 authentication key. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.17.1.5 |
usdOspfMd5VirtIntfRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.17.1.6 |
usdOspfNetworkRangeTableThe Unisphere OSPF network range table describes the OSPF-specific
characteristics of network ranges, encompassing one or multiple OSPF
interfaces. SEQUENCE OF UsdOspfNetworkRangeEntry .1.3.6.1.4.1.4874.2.2.14.1.18 |
usdOspfNetworkRangeEntryThe Unisphere OSPF network range entry describes OSPF-specific
characteristics of one OSPF network range. UsdOspfNetworkRangeEntry .1.3.6.1.4.1.4874.2.2.14.1.18.1 |
usdOspfNetRangeNetThe network range address.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.1 |
usdOspfNetRangeMaskThe subnet mask used for the network range. Unlike the mask used under
the command line interface (CLI), this object is set in the non-inversed
format (i.e. not a wild-card mask).ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.2 |
usdOspfNetRangeAreaIdThe OSPF area ID this network range belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.3 |
usdOspfNetRangeRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.18.1.4 |
usdOspfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4 |
usdOspfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4.1 |
usdOspfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4.2 |