Unisphere-Data-LOG-MIB
AI MIB Summary
The Unisphere-Data-LOG-MIB facilitates SNMP-based retrieval of system log events, audit trails, and security alerts for Unisphere Networks Inc. enterprise storage and networking appliances. It enables the monitoring of critical operational states, including system errors, configuration changes, and access control violations to support centralized log aggregation and forensic analysis.
The Log MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdLogMIB.1.3.6.1.4.1.4874.2.2.28
56
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
usdLogMIBThe Log MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.28 |
usdLogTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.0 |
usdLogMsgThresholdTrapThis trap is generated to report that an incremental number of log messages (described by the value of usdLogMsgThreshold) have been added to usdLogMsgTable. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.28.0.1 |
usdLogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1 |
usdLogDestinations OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1 |
usdLogDestSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.1 |
usdLogDestSyslogSeverityThe minimum severity level of messages sent to the SYSLOG server. A value of 'off' indicates no log messages are sent to this destination.rwobsolete UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.1 |
usdLogDestSyslogAddressThe IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured.rwobsolete IpAddress .1.3.6.1.4.1.4874.2.2.28.1.1.1.2 |
usdLogSyslogTableA table describing the characteristics of each syslog destination. SEQUENCE OF UsdLogSyslogEntry .1.3.6.1.4.1.4874.2.2.28.1.1.1.3 |
usdLogSyslogEntryAn entry describingthe characteristics of a syslog destination. UsdLogSyslogEntry .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1 |
usdLogSyslogIpAddressThe IP address of this syslog destination. This value must be a unicast IP address. IpAddress .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1 |
usdLogSyslogRowStatusControls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2 |
usdLogSyslogSeverityThe severity level for this syslog destination. Setting this value to 'off' suppresses log messages from being sent to this syslog destination.rw UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3 |
usdLogSyslogFacilityThe facility id attached to messages sent to this syslog destination.rw UsdLogSyslogFacility .1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4 |
usdLogDestConsole OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.2 |
usdLogDestConsoleSeverityThe minimum severity level of messages sent to the console. A value of 'off' indicates no log messages are sent to this destination.rw UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.2.1 |
usdLogDestNvFile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.1.3 |
usdLogDestNvFileSeverityThe minimum severity level of messages sent to the nonvolatile log file. A value of 'off' indicates no log messages are to be sent to this destination.rw UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.1.3.1 |
usdLogCategories OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.2 |
usdLogCatScalars OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.2.1 |
usdLogCatTableA table describing the characteristics of each log category. SEQUENCE OF UsdLogCatEntry .1.3.6.1.4.1.4874.2.2.28.1.2.2 |
usdLogCatEntryAn entry describing the characteristics of a log category. UsdLogCatEntry .1.3.6.1.4.1.4874.2.2.28.1.2.2.1 |
usdLogCatIndexAn integer index uniquely associated with a log. Index values do not necessarily persist across system reboots. Following reboot, mappings of (reboot-invariant) log category names to log index values is available in the usdLogCatNameTable. Integer32 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1 |
usdLogCatNameThe name of this log category.ro UsdLogCatName .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2 |
usdLogCatDescrA description of the functionality for which events are recorded by this log category.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3 |
usdLogCatEngineeringAn indication of whether this log is intended mainly for engineering development and debug purposes.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4 |
usdLogCatDiscardsThe number of messages generated by this log category that were discarded because of resource limitations.ro Counter32 .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5 |
usdLogCatSeverityThe severity level for this log category. The value 'off' disables recording of this log category's messages. For other severity level values, only messages at or above this severity level will be logged in usdLogMsgTable.rw UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6 |
usdLogCatVerbosityThe verbosity level for this log category. Supplementary information may be available for certain event types. This object controls whether that additional information, if available for a given event, is recorded.rw UsdLogVerbosity .1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7 |
usdLogCatNameTableA table mapping each log category's name to its index. SEQUENCE OF UsdLogCatNameEntry .1.3.6.1.4.1.4874.2.2.28.1.2.3 |
usdLogCatNameEntryAn entry mapping a log category's name to its index. UsdLogCatNameEntry .1.3.6.1.4.1.4874.2.2.28.1.2.3.1 |
usdLogCatNameNameThe name of the log category.ro UsdLogCatName .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1 |
usdLogCatNameIndexThe log index associated with this log category.ro Integer32 .1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2 |
usdLogMessages OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.3 |
usdLogMsgScalars OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.1.3.1 |
usdLogMsgCapacityThe maximum capacity, in number of log messages, of the usdLogMsgTable.ro Integer32 UNITS "messages" .1.3.6.1.4.1.4874.2.2.28.1.3.1.1 |
usdLogMsgLastSeqNumberThe sequence number of the most recent usdLogMsgTable entry. By monitoring this object's rate of change in relation to the usdLogMsgTable capacity, a management client can determine whether it is polling usdLogMsgTable frequently enough to avoid missing log messages.ro Counter32 .1.3.6.1.4.1.4874.2.2.28.1.3.1.2 |
usdLogMsgTableA table of log messages generated by this device. SEQUENCE OF UsdLogMsgEntry .1.3.6.1.4.1.4874.2.2.28.1.3.2 |
usdLogMsgEntryA log message generated by this device. UsdLogMsgEntry .1.3.6.1.4.1.4874.2.2.28.1.3.2.1 |
usdLogMsgSysUpTimeStampThe value of sysUpTime when this log message was recorded. TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1 |
usdLogMsgSequenceNumberA sequence number that uniquely identifies this entry. Sequence numbers are assigned consecutively beginning with 1. More recent entries have higher sequence numbers. Unsigned32 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2 |
usdLogMsgCatNameName of the log category that contributed this message.ro UsdLogCatName .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3 |
usdLogMsgCatIndexIndex of the log category that contributed this message.ro Integer32 .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4 |
usdLogMsgSeverityThe severity of the message.ro UsdLogSeverity (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5 |
usdLogMsgTextThe text of the log message. Truncation of log message text is indicated by n asterisk character ('*') in the last octet of a maximum-size string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6 |
usdLogMsgDateAndTimeStampThe date and time this message was generated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7 |
usdLogTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.2 |
usdLogMsgThresholdNumber of log messages which, when added to usdLogMsgTable, cause a usdLogMsgThresholdTrap to be generated. This value is expressed as a percentage of the capacity of usdLogMsgTable. A value of zero disables trap generation.rw Integer32 .1.3.6.1.4.1.4874.2.2.28.2.1 |
usdLogMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4 |
usdLogMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4.1 |
usdLogComplianceThe compliance statement for entities which implement the Unisphere Networks, Inc. Log MIB.obsolete Unknown .1.3.6.1.4.1.4874.2.2.28.4.1.1 |
usdLogCompliance2The compliance statement for entities which implement the Unisphere Networks. Log MIB., including support for multiple SYSLOG destinations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.1.2 |
usdLogMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.28.4.2 |
usdLogGroupA collection of objects providing management of Unisphere Networks, Inc. logging capabilities.obsolete Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.1 |
usdLogGroup2A collection of objects providing management of Unisphere Networks, Inc logging capabilities, including support for multiple SYSLOG destinations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.2 |
usdLogTrapGroupA management notification pertaining to logging operations. Unknown .1.3.6.1.4.1.4874.2.2.28.4.2.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →Juniper-BGP-MIB
SNMP MIB module
673 objects→
Unisphere-Data-BGP-MIB
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
466 objects→
Juniper-RADIUS-CLIENT-MIB
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
397 objects→
Juniper-UNI-ATM-MIB
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
380 objects→
Juniper-AAA-MIB
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
362 objects→
Juniper-POLICY-MIB
SNMP MIB module
348 objects→